







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterGutters & Accessories in Allen, TX
Gutter work in Allen usually means one of two things: a system that’s clogged, sagging or pulling loose from the fascia, or a roof replacement where the old gutters can’t be reused. Either way, the fix has to match your roofline, your lot grading and the way North Texas rain actually arrives. Groundwork Construction Co. of Allen installs seamless gutters, downspouts, leaf guards and the accessories that keep water moving away from your slab. Call (888) 343-9048 and a live person answers, day or night.
This is a roofing-adjacent trade, and we treat it that way. Gutters are the drip edge of your whole water-management system. If you’re already planning roof work, start with our Roofing page and we’ll fold the gutter replacement into the same project so the fascia, drip edge and hangers all get handled together instead of twice.
Allen sits on mostly expansive clay soil, and that’s the detail that drives most of the gutter calls we get here. When gutters dump water in one spot, the soil swells and shrinks, and the movement shows up as foundation cracks and sticking doors. A properly sized, properly pitched gutter system isn’t cosmetic. It’s foundation protection.
Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform. All gutter work is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Key Takeaways
- Seamless aluminum gutter replacement in Allen typically runs $1,600 to $4,200 depending on linear footage and stories.
- Leaf guards, larger downspouts and fascia repair usually add $8 to $22 per linear foot.
- We answer the phone 24/7 with a real person, and estimates are free.
- Every job is backed in writing by the 730-Day Done Right Promise, or 24 months of coverage from install.
- 0% financing for 18 months and $1,000 off projects over $10,000 are available.

When You Need Gutters & Accessories
Gutter problems in Allen rarely announce themselves. They show up as a stain on the soffit, a puddle against the foundation, or a strip of dead grass where water is dumping. Here are the situations that call for a look:
- Water sheeting over the front edge during rain. If you can see water spilling past the gutter instead of running to the downspout, the pitch is off or the system is undersized for your roof area. In Allen, a 1,500-square-foot roof plane can shed more than 900 gallons in a single one-inch storm, and a 4-inch gutter won’t keep up.
- Rust streaks or granules in the gutter trough. Granules washing off asphalt shingles land in the gutter and tell you the roof is aging. That’s a good moment to look at both systems together rather than replacing gutters on a roof that’s near the end of its life.
- Gutters pulling away from the fascia. Allen’s clay soil moves, and so do houses. When the fascia board rots or the spikes back out, the gutter drops, and water starts running behind it into the wall. This one gets worse fast.
- Overflow at inside corners and valleys. The inside corners are where debris collects first, and where overflow does the most damage. If you see staining on the corner trim after storms, the corner needs a hanger upgrade and likely a leaf guard.
- Foundation cracks, sticking doors, or soil pulling away from the slab. Downspouts that discharge right at the foundation are the usual cause. Extending them or adding splash blocks is cheap; foundation repair is not.
- You’re replacing the roof. Old gutters rarely survive a tear-off cleanly, and reusing them on a new roof is a false economy. We quote both at once so you see the whole number before you commit.
If any of that sounds familiar, don’t wait for the next big storm to find out how bad it is. Call (888) 343-9048 and we’ll get someone out to take a look.
Our Gutters & Accessories Process
We keep this simple, and we tell you the price before anyone picks up a tool. Here’s how a gutter project runs from first call to final walkthrough:
- Free estimate and on-site measurement. We measure the actual roofline, count the roof planes and valleys, note the downspout locations and check the fascia for rot. We also look at where the water currently goes, because a gutter that works and a gutter that drains to the right place are two different things. You get a written, upfront price with no surprises.
- Material and profile selection. Seamless aluminum is what most Allen homeowners choose, in 5-inch or 6-inch K-style. We walk through color, gauge and whether a half-round profile suits the house better. For homes near the historic pockets of Old Allen, the profile matters as much as the color. We also spec leaf guards and downspout sizing here, not after the fact.
- Fabrication on site. Seamless gutters are run to length in your driveway, which means no mid-run seams to leak. Runs are formed to the measured length and capped at the ends.
- Removal and fascia repair. The old system comes down, and any soft or rotten fascia gets replaced before new hangers go up. We use hidden hangers screwed into the fascia rather than spikes, spaced to handle the load. This is the step most crews skip, and it’s why gutters sag two years later.
- Installation with proper pitch and hanger spacing. Gutters get pitched toward the downspouts at roughly a quarter inch per ten feet, with hangers set no more than 24 inches apart. Downspouts get fastened and routed to discharge away from the foundation, with extensions or splash blocks included.
- Water test and walkthrough. We run water through the system before we leave so you can see it working. Then we walk the job with you, show you what was done, and hand over the written 730-Day Done Right Promise.

Gutters & Accessories Pricing in Allen
Gutter pricing in Allen comes down to three things: linear footage, number of stories, and how much fascia repair the job needs. A single-story ranch in Twin Creeks prices very differently from a two-story in Bethany Ridge with a steep roof and a lot of inside corners. Here are honest ranges for what we install:
| Item | Typical Price Range | What Drives the Number |
|---|---|---|
| Seamless aluminum gutters, 5-inch | $8 – $14 per linear foot | Gauge, color, single vs. two-story |
| Seamless aluminum gutters, 6-inch | $11 – $18 per linear foot | Larger roof planes and steep pitches |
| Downspouts (installed) | $8 – $14 per linear foot | Height and routing |
| Leaf guards / gutter covers | $8 – $22 per linear foot | Mesh vs. micro-mesh, brand, roof pitch |
| Fascia repair or replacement | $10 – $25 per linear foot | Extent of rot, material, access |
| Hidden hanger upgrade or re-hang | $4 – $9 per linear foot | Existing system condition |
| Full replacement, typical Allen home | $1,600 – $4,200 | Footage, stories, fascia, accessories |
Most single-story Allen homes land in the $1,600 to $2,600 range for a full replacement with standard downspouts. Two-story homes with steep pitches and long runs run higher, usually $2,800 to $4,200. Leaf guards are the line item homeowners ask about most, and they’re worth it here: Allen’s live oaks and pecans drop leaves and tassels that clog open gutters within a season.
We quote in writing and we don’t move the number once work starts unless you approve a change. That’s what upfront pricing means. If the project crosses $10,000, you get $1,000 off, and 0% financing for 18 months is available on approved credit. Every job is covered by the 730-Day Done Right Promise, which we put in writing before we leave the driveway.
What affects the cost most
- Linear footage. The single biggest factor. We measure the actual roofline, not the footprint.
- Stories and access. Two-story runs need more labor and more careful staging.
- Fascia condition. Soft or rotted fascia has to come out before new hangers go in. We tell you what we find before we touch it.
- Downspout count and routing. More downspouts and longer runs add cost, but they’re what actually move water away from the slab.
- Accessories. Leaf guards, strainers, splash blocks and extensions all add up, and each one earns its place.
If you want a real number instead of a range, call (888) 343-9048. Estimates are free, and someone answers the phone any hour.
Accessories we install
Gutters only work as a system, and the accessories are where a lot of jobs get cut short. We install seamless aluminum in 5-inch and 6-inch K-style and half-round, plus downspouts sized to the roof area they serve. Leaf guards are the most requested add-on, and micro-mesh is what we recommend for Allen’s tree cover, since it keeps out the small debris that screen-style covers let through. We also handle downspout extensions that carry water at least four feet from the foundation, splash blocks where extensions aren’t practical, strainers at the top of each downspout, and end caps and outlets sized correctly. For homes with a rain barrel or a French drain, we can route a downspout into it instead of dumping it at the slab.
We carry quality hardware for every accessory. Our brand partners include Moen, Blanco, Delta and American Standard, and you’ll find the same standard of finish in the fittings we spec for your gutter system. Nothing goes on the house that we wouldn’t put on our own.
FAQs – Gutters & Accessories
How much does gutter replacement cost in Allen, TX?
A full seamless aluminum gutter replacement in Allen typically runs $1,600 to $4,200, with most single-story homes landing between $1,600 and $2,600. Two-story homes with steep pitches and long runs sit at the higher end. Leaf guards, downspout extensions and fascia repair are priced separately and are quoted upfront. Call (888) 343-9048 for an exact quote, and estimates are free.
Do I need leaf guards in Allen?
For most Allen homes, yes, leaf guards are worth the money. The city’s mature oak and pecan canopy drops enough debris between October and March that open gutters clog within one season, and a clogged gutter overflows into the fascia and foundation. Micro-mesh guards run $8 to $22 per linear foot installed. We’ll tell you honestly if your tree cover is light enough that guards don’t pay for themselves.
Can you install gutters at the same time as a roof replacement?
Yes, and that’s usually the better way to do it. Doing both in one project means the drip edge, fascia and hangers get handled in the right order, and you avoid paying for staging twice. If your roof is near the end of its life, we’ll flag it during the gutter estimate so you can plan both together. Start with our Roofing page if roof work is on the table.
How long does a gutter installation take?
Most gutter replacements on an Allen home are completed in a single visit, usually four to six hours depending on linear footage and how much fascia repair is needed. We don’t leave a job half-finished overnight. If fascia rot turns out to be more extensive than the estimate showed, we stop and get your approval before the number changes.
What happens if my gutters aren’t done right?
We come back and fix it. Every gutter job is covered by the 730-Day Done Right Promise, in writing, before we leave. If the pitch is off, a hanger pulls loose, or a seam we formed fails, we make it right within that window at no cost to you. That’s the point of putting a guarantee in writing instead of saying it out loud.
Do you handle downspout routing away from the foundation?
Yes, and it’s part of every job we quote. Downspouts get extended at least four feet from the foundation, with splash blocks where extensions won’t work. On Allen’s clay soil, water that pours straight down at the slab is the leading cause of foundation movement we see. Routing it away is cheap insurance and we don’t charge extra to do it right.
Can you fix gutters that are pulling away from the house?
Yes. Pulling gutters usually mean rotted fascia or failed spikes, and the fix is to replace the bad fascia and re-hang the run with hidden hangers screwed into solid wood. Re-hanging without addressing the fascia just delays the problem. We’ll show you what’s behind the gutter before we quote the repair.
Do you offer financing on gutter projects?
Yes. 0% financing for 18 months is available on approved credit, and projects over $10,000 get $1,000 off. Both offers apply to gutter work combined with roof replacement, which is often where the bigger projects land. Call (888) 343-9048 to talk through the numbers with a person, not a voicemail.
Why Allen Homeowners Call Groundwork
We’ve been in business since 2014 and we’ve built a reputation in Allen on straight answers and work that holds up. Our technicians are background-checked, arrive in uniform, and bring up to 12 years of experience to the job. Calls are answered by a live person 24/7, not a voicemail tree. Estimates are free, pricing is upfront, and every job is backed in writing by the 730-Day Done Right Promise.
Gutters are unglamorous work. Most homeowners don’t think about them until water is running down the wall or pooling at the slab. When that happens, you want someone who answers the phone, shows up when they say, and stands behind the work. That’s the job. From foundation to finish line, we handle it.
If you’re looking at gutter work alongside other projects, we’ve got you covered on the rest of the house too. Take a look at our Allen service area page to see everything we do locally, or call us and we’ll walk you through it.
Ready to get the water moving where it should? Call (888) 343-9048 for a free estimate. A real person answers 24/7, and we’ll get a written, no-surprise price in your hands fast. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Allen, serving Allen.


