







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDoor Installation in Allen, TX
Door installation in Allen typically runs $450 to $1,400 per door for a standard interior or exterior replacement, and most of our jobs are finished in a single visit. That range covers the door, hardware, trim, and labor. If you’re upgrading to a fiberglass or steel entry door with sidelights and premium hardware, expect to land closer to $2,800 to $4,500. We install interior doors, exterior entry doors, patio doors, storm doors, and garage entry doors across Allen, and we quote the full job before we touch a hinge.
Groundwork Construction Co. of Allen handles door installation as part of our broader Windows & Doors work, which means the same crew that measures your opening also fits your trim and seals the frame. That matters more in North Texas than most homeowners realize. Allen homes sit on expansive clay soil that shifts with our wet-spring, dry-summer cycles, and a door that was plumb five years ago can be binding on the strike side by spring. Getting the rough opening and shims right the first time is how you avoid a door that sticks every March. Call (888) 343-9048 and a live person answers, any hour.
We’ve been installing doors and windows here since 2014, and every installation is covered by our 730-Day Done Right Promise. If the door doesn’t latch clean, if the frame racks, if the weatherstripping fails inside of two years, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing.

Key Takeaways
- Door installation in Allen runs $450 – $1,400 for interior and standard exterior doors, and $2,800 – $4,500 for premium entry systems with sidelights.
- Most single-door installations are completed in one visit; multi-door projects are scheduled across one to two days.
- Clay soil movement in Allen is a real factor in door fit, so proper shimming and frame anchoring are non-negotiable.
- All installations are backed by the 730-Day Done Right Promise, and your pricing is quoted upfront with no add-ons after the fact.
When You Need Door Installation
Some door calls are obvious (a cracked door slab, a broken hinge). Others creep up slowly. Here are the scenarios we see most often in Allen homes:
- Your exterior door won’t latch or seal. You can see daylight around the frame, or the deadbolt misses the strike plate by a quarter inch. In Allen, this usually shows up after a wet spring when the clay under the slab swells, then settles hard in August. A door that once fit tight now lets in hot air and bugs.
- You’re replacing hollow-core interior doors with solid-core. Hollow doors in older Allen neighborhoods sound cheap when they close and block almost no sound between bedrooms. Solid-core replacements cost a bit more per door but change how the whole house feels.
- Your entry door is warped, delaminating, or rusting. Steel entry doors on south-facing walls take the full Texas sun. When the paint blisters and the door skin starts to separate from the core, patching won’t save it. Replacement does.
- You’re converting a patio or adding exterior access. A new back door, a pair of French doors, or a garage entry door off the laundry room. These often require a new rough opening, which means framing, header work, and re-trim.
- You have a storm door that pulled out of the frame. Storm doors hung on a warped jamb will keep tearing out. The fix is correcting the frame, not re-drilling the screws deeper.
- You’re refreshing a room during a remodel. New flooring and paint make tired doors stand out. Replacing slabs and hardware during a flooring or remodel project costs less in labor because the trim work is already open.
If you’re also dealing with windows that fog, stick, or lost their seal, bundling door and window work in one project usually saves on labor over doing them separately. You can read more about our window work on the home page and the wider scope we cover.

Our Door Installation Process
Here’s exactly how a Groundwork door installation runs, from the first call to the walkthrough:
- On-site measurement and consult. We measure the rough opening, check the frame for plumb and level, and look at how the door sits relative to the floor and threshold. If the frame is out of square, we plan for that now instead of discovering it on install day.
- Upfront written quote. You get a line-item price before any work starts. Door, hardware, trim, sealing, and disposal are all in the number. No surprise charges for extra shimming or re-trimming.
- Material selection. We walk you through door type (steel, fiberglass, wood, or composite exterior; hollow or solid-core interior), finish, and hardware. Hardware matters: a heavy solid-core door needs commercial-grade hinges and a matched lockset. We source from trusted brands so you’re choosing quality, not just what’s in stock.
- Removal and prep. Old door and frame come out. We inspect the rough opening for rot, water damage, or termite activity, which is common on exterior walls in older Allen homes. If there’s rot, we address it before the new door goes in.
- Installation. New door set in the frame, shimmed plumb and square, anchored through the jamb into framing. We weatherstrip, seal the exterior perimeter, insulate the cavity where needed, and hang the door with even reveals all the way around.
- Trim, hardware, and walkthrough. Casing and trim installed and caulked. Lockset, deadbolt, and any screen or storm hardware fitted and tested. We operate the door with you, check the swing and latch, and confirm the seal before we leave.
Most single-door installations are done in one visit. Multi-door projects (say, six interior doors or a front door plus patio door) are scheduled across one to two days. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform.
Door Installation Pricing in Allen
Pricing for door installation in Allen depends on door type, size, frame condition, and hardware. Here’s the honest range for the most common jobs, with the line items broken out:
| Job Type | Typical Range |
|---|---|
| Interior door replacement (hollow-core) | $450 – $750 per door |
| Interior door replacement (solid-core) | $650 – $1,050 per door |
| Standard exterior entry door (steel or fiberglass) | $900 – $1,400 installed |
| Premium entry door with sidelights + hardware | $2,800 – $4,500 |
| Patio door (sliding or French) | $1,800 – $3,800 |
| Storm door installation | $300 – $600 |
| Frame repair or rough opening adjustment | $200 – $600 additional |
What moves the number most: door material and grade, hardware quality, whether the frame needs repair, and whether the opening is new construction or a straight replacement. A straight swap in a sound frame is the low end. A new rough opening in an exterior wall, with header and trim work, is the high end.
We quote upfront and the number you see is the number you pay. No-hassle upfront pricing means you’re not approving a bid and then getting a call about extra materials. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so a door-plus-window or door-plus-trim project stays within reach. Free estimates are always available: call (888) 343-9048 and we’ll schedule a measurement.
For a sense of broader project scope and budgeting, see our Allen service area page, and if you’re pairing doors with other exterior work, our roofing and window teams can coordinate a single schedule.
FAQs – Door Installation
How much does door installation cost in Allen?
Interior door installation in Allen typically runs $450 to $1,050 per door, and exterior entry doors run $900 to $1,400 for standard units, up to $4,500 for premium entries with sidelights. Frame repair, hardware upgrades, and new rough openings add to the total. Call (888) 343-9048 for an exact quote, and estimates are free.
Can you install a door the same day?
Replacement of a standard door in a sound frame is often completed in a single visit, usually within a scheduled window of a few days out. Same-day work depends on door availability and our schedule; calling early in the day helps. Call (888) 343-9048 and we’ll tell you what’s realistic for your door.
Do I need a permit to install a door in Allen?
Straight replacement of a door in an existing opening generally does not require a building permit in Allen. New exterior openings, changes to load-bearing walls, and conversions that alter the building footprint or structural framing do require permitting. We’ll walk you through what your specific project needs during the free estimate.
Why do doors in Allen homes stick and bind?
Most sticking doors in Allen come from soil movement, not from the door itself. The expansive clay soil across North Texas swells in spring rain and shrinks in summer drought, and that movement racks the frame a few degrees. Proper shimming, anchored jambs, and a solid frame that accommodates that movement prevent most binding. If a door is already sticking badly and the frame is racked, call (888) 343-9048 for an assessment before you replace the door, since a new slab in a bad frame will bind the same way.
If you’re considering additional work in the same visit, our team also handles related exterior projects and can map out a combined scope. From foundation to finish line, we keep it one contractor, one schedule, one written guarantee. And every job is covered by our 730-Day Done Right Promise: built to last, backed in writing. Call (888) 343-9048 for a free estimate and we’ll get your doors hung right.
Written by the team at Groundwork Construction Co. of Allen, serving Allen.


