







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterPaver Driveways in Allen, TX
A paver driveway in Allen, TX, typically costs between $12 and $24 per square foot installed, or roughly $8,500 to $18,000 for a standard two-car drive. Pavers are clay brick, concrete, or natural stone units set on a compacted base and finished with sand or polymeric joints, which makes them repairable, drainable, and dramatically more durable than poured concrete in North Texas soil. Groundwork Construction Co. of Allen installs paver driveways on a properly engineered base for the local expansive clay, backs every installation with our 730-Day Done Right Promise, and answers the phone live, 24/7, at (888) 343-9048.
If you’ve been comparing options for your Driveway & Pavers in Allen project, or you’re at the early stage of planning a full exterior update through our Driveway & Pavers service line, this page covers what actually matters for a paver install here: the base, the drainage, the material choices, and what it costs.
Allen sits on the Blackland Prairie clay that runs across Collin County, and that soil is the single biggest determinant of whether a paver driveway holds up for decades or shifts within a season. We spend more time on base preparation than most installers spend on the entire job because that’s where failures begin. Allen’s newer subdivisions, from Twin Creeks to Bethany Ridge, have soils and drainage that require excavation and a graded, compacted base rather than pavers set on existing concrete. We build for that reality.
Key Takeaways
- Paver driveways in Allen usually run $12 – $24 per square foot installed, with full two-car drives landing between $8,500 and $18,000.
- The base is everything. On North Texas clay, a properly excavated, compacted aggregate base is what separates a 25-year driveway from a three-year problem.
- Pavers are repairable one unit at a time, unlike cracked concrete slabs.
- Every Groundwork install carries the 730-Day Done Right Promise and is priced upfront – the number you see is the number you pay.
- Call (888) 343-9048 for a free estimate and design consult.

When You Need Paver Driveways
Paver driveways make sense in a specific set of situations. If you recognize your situation in this list, it’s worth getting an estimate:
- Your concrete driveway has cracked or heaved. This is common in Allen neighborhoods built in the 1990s and 2000s, where original concrete slabs have started to crack along utility trenches or lift from clay movement. A paver drive flexes with minor soil movement instead of fracturing, and if a section does settle, we can lift and reset it without replacing the whole surface.
- You’re doing a full exterior upgrade. When homeowners in Allen replace a roof, fence, and driveway together, the paver driveway becomes the anchor of the front elevation. It pairs visually with fence installation and windows & doors updates and raises curb appeal in a way that stained concrete never does.
- Your driveway is a drainage problem. Allen’s heavy spring rains pool on flat slabs and wash against foundations. A paver drive can be graded to shed water away from the house and installed with permeable joints to let water move through, which matters most on lots in low-lying areas near Watters Creek or along the flood-prone spots near Rowlett Creek.
- You want to add a wider drive, a turnaround, or a third-bay approach. Expanding a driveway in pavers can be matched to existing pavers or used to add a motor court without tearing out what’s already there.
- You’re planning a home addition or ADU. If a new garage, home addition or ADU is going up, the driveway approach usually has to be reworked anyway – pavers give you a durable, repairable surface that can be adjusted if the footprint changes.
- You’re remodeling the front of the house. If a kitchen remodel or bathroom remodeling project has you rethinking the whole property, a paver driveway ties the exterior together as part of one coordinated project.
Our Paver Driveways Process
Every paver driveway we install follows the same sequence. Skipping any of these steps is what produces the driveways that fail in three years:
- Site evaluation and design. We walk the property, measure the drive, check the slope, and look at how water currently moves off the roof and slab. We match paver style, color, and pattern to the house, and we give you a written estimate with upfront pricing before anything is ordered. For an exterior project, this is also where we coordinate with any roofing or roofing work happening on the same property so the whole job runs in one motion.
- Demolition and excavation. Existing concrete or asphalt comes out. We excavate six to ten inches, deep enough to accept the aggregate base, and we haul away all debris.
- Base preparation and compaction. This is where most of the job’s value lives. We lay a compacted crushed-stone base in lifts, compact each lift with a plate compactor, and grade the finished base to drain water away from the foundation. On Allen’s expansive clay, this step prevents the settlement that ruined the last driveway.
- Edge restraint and sand setting bed. A concrete or paver edge restraint locks the perimeter so the field can’t spread under load. We screed a level sand bed and hand-set each paver in the chosen pattern.
- Cutting, compaction, and joint sand. We cut edge pieces with a wet saw for clean lines, compact the finished surface to seat pavers into the bed, and sweep polymeric joint sand into the seams to lock everything in place and resist weeds and washout.
- Final walkthrough. We walk the finished drive with you, confirm drainage, clean up the site, and hand over care instructions. Then the 730-Day Done Right Promise carries the workmanship for two years.

Paver Driveways Pricing in Allen
Here’s an honest pricing table for paver driveways in Allen. Actual costs depend on square footage, paver material, site access, and how much base excavation the property needs.
| Item | Typical range |
|---|---|
| Paver driveway (concrete block), installed | $12 – $18 per sq ft |
| Paver driveway (clay brick or premium), installed | $16 – $24 per sq ft |
| Standard two-car drive (roughly 400 – 600 sq ft) | $8,500 – $18,000 |
| Driveway extension or widening | $2,500 – $6,000 |
| Full driveway replacement (demo of existing) | Add $1,500 – $4,500 |
| Permeable joint upgrade (polymeric sand) | Add $1 – $3 per sq ft |
What drives the price up or down: The paver material is a big factor – concrete block is the budget-friendly choice, while clay brick and natural stone cost more. Base excavation on Allen’s clay can add cost if we find old concrete, poor drainage, or a utility line that needs protection. Access matters too: a narrow drive where material has to be moved by hand takes longer than a wide, open lot. If you’re replacing an existing drive, demolition adds to the total.
We offer no-hassle upfront pricing – the number you see is the number you pay – plus 0% financing for 18 months and $1,000 off projects over $10,000. That makes a full driveway replacement financially manageable without a surprise bill at the end. Call (888) 343-9048 for a free estimate and design consult.
Homeowners in Allen are often planning a paver driveway alongside a wider exterior update. If your driveway project is part of a bigger home improvement plan, it may make sense to line it up with work on your kitchen, bathroom, roof, or fence. Handling several projects through one contractor keeps the schedule and the budget coherent. For homeowners in neighboring communities, we also install paver driveways in Plano, McKinney, Frisco, and Denton.
Why paver driveways hold up better in North Texas
Allen’s soil is the story here. The Blackland Prairie clay expands when it’s wet and contracts when it dries, and that seasonal movement is what cracks concrete driveways across the metroplex. Concrete is rigid – when the soil moves, the slab cracks. Pavers are a flexible system. Each unit is independent, so the driveway can accommodate minor movement and settlement without a fracture, and when a section does settle, a paver drive can be lifted, re-leveled, and reset. No replacing a whole slab. That repairability is a major reason pavers are the right long-term choice for a North Texas driveway, and it’s why we build them to last.
The other advantage is drainage. Allen gets its heaviest rain in spring and fall, and water pooling against a garage slab or foundation is a real problem. A properly graded paver drive, especially with polymeric sand joints, lets water move through and sheds it away from the house. We design the slope and base to manage water, not fight it.
FAQs – Paver Driveways
How much does a paver driveway cost in Allen?
A paver driveway in Allen typically costs $12,000 to $16,000 for a standard two-car drive, or $12 to $24 per square foot installed depending on the paver material. Clay brick and premium stone sit at the top of that range; concrete block sits at the bottom. Call (888) 343-9048 for an exact quote – estimates are free and pricing is upfront.
Are paver driveways better than concrete in Allen?
Yes, for most Allen properties, paver driveways outperform concrete because they’re repairable and tolerate the soil movement that cracks slabs. Concrete is cheaper upfront but rigid and prone to cracking on the clay soil common in Collin County. Pavers cost more to install but a single settled section can be reset instead of replacing the whole surface. The 730-Day Done Right Promise backs the workmanship on every install.
How long does a paver driveway installation take?
Most residential paver driveways in Allen are completed in two to five days, depending on square footage, demolition, and base conditions. Larger drives, significant base excavation, or complex drainage work extend the schedule. We give you a timeline before we start so you can plan around it. Call (888) 343-9048 to schedule a free estimate.
Do paver driveways hold up in Texas heat and clay soil?
Paver driveways hold up well in North Texas when they’re installed on a properly engineered, compacted base. Clay soil movement and summer heat are hard on concrete, but the flexible paver system tolerates minor movement and drains effectively when installed right. Our technicians have up to 12 years of experience with the soil conditions specific to Allen. Call (888) 343-9048 to discuss the right approach for your lot.
Can you match a paver driveway to my existing pavers?
In most cases yes, we can match a new paver installation to existing pavers or blend a coordinated style. We bring samples from our brand partners and confirm the match before ordering. If an exact match isn’t available, we recommend a complementary pattern for the new section. Call (888) 343-9048 for a free design consult.
Get a Paver Driveway That Lasts
Groundwork Construction Co. of Allen builds paver driveways for Allen homeowners who want a surface they won’t have to think about again. We’ve been in business since 2014, our background-checked, uniformed technicians show up on time and do the base work right, and every job is backed in writing by the 730-Day Done Right Promise – if it’s not done right, we make it right. Calls are answered by a live person 24/7, and pricing is upfront with 0% financing for 18 months and $1,000 off projects over $10,000.
Whether you’re replacing a cracked concrete drive in Twin Creeks, widening the approach in Bethany Ridge, or planning a full exterior update in Allen, we’d like to give you a free estimate and design consult. Call (888) 343-9048 today and we’ll help you plan a driveway built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Allen, serving Allen.


