







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Kitchen Remodel Actually Costs in Allen, TX
A full kitchen remodel in Allen runs $14,000-$45,000, and the honest driver of that spread isn’t cabinet finish or countertop edge profile. It’s the wall. Most Allen kitchens sit in 1990s brick-traditional and Tudor two-stories built by production builders, and the dining room is boxed off from the kitchen by a load-bearing wall. Opening it up means an engineered beam, a stamped drawing, and a city inspection. Call (888) 343-9048 and we’ll walk your layout and give you a real number, not a calculator estimate that ignores the structural line item entirely.
Here’s what almost every online kitchen cost tool leaves out, and why your Allen quote comes back higher than the internet promised.

The Load-Bearing Wall Nobody Budgets For
The number-one kitchen upgrade Allen homeowners ask for is open concept. The number-one obstacle their builder left behind is a structural wall running right down the middle of the room. Removing that wall isn’t a demolition job, it’s an engineering job. A licensed engineer reviews the span, specifies an engineered LVL beam sized to carry the second floor, and stamps the drawing the city requires before a permit issues.
In Allen, that full sequence – engineering, beam, framing, drywall repair, and inspection – lands between $4,000 and $9,000. It’s the single biggest line item in a typical Allen kitchen budget that no calculator shows you. Skip it by hiring someone who “knows a guy,” and you get a sagging second floor and an unpermitted structural change that has to be disclosed at resale.
This is the work Groundwork Construction Co. of Allen builds around from day one. Structural scope gets priced and permitted up front, with upfront pricing, no surprises – the number you see is the number you pay.
What a Real Allen Kitchen Remodel Costs, Line by Line
Cabinet cost is only one row in the stack. Here’s the full picture for Allen, using the same ranges we quote across the metro:
| Line Item | Typical Allen Range |
|---|---|
| Full kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Load-bearing wall removal + engineered beam | $4,000-$9,000 |
| Allen permit & inspection fees | $500-$1,200 |
| Cabinet installation | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
Add an island and full-height cabinetry, and a mid-size Allen kitchen lands near the middle of the $14,000-$45,000 band. That’s before anything structural. If you’re weighing a scoped refresh against a full gut, our Kitchen Remodeling in Allen page lays out what each tier includes.

Why Named Brands Beat “Builder-Grade vs. Semi-Custom” Pricing Games
Most contractors quote cabinets with vague labels. “Builder-grade” and “semi-custom” tell you nothing about the box, the drawer glides, or the finish warranty. They exist to hide the quality gap and let the bid move. We don’t use them.
Groundwork installs KraftMaid cabinetry and Cambria quartz. Those are named products with published specs and consistent national pricing, so you can compare our cabinet line against another contractor’s cabinet line and actually see what you’re paying for. The KraftMaid door style you pick has a known cost. The Cambria slab you choose has a known cost. No decoder ring needed.
In the Allen subdivisions – Watters Crossing, Twin Creeks, Bethany Ridge – cabinet replacement is the most common kitchen job once the original 1990s boxes start failing at the hinges and drawer fronts. A named-brand replacement gives you a fixed point to budget against instead of a moving quote.
The 1990s Plumbing Problem Behind Your Kitchen Walls
Almost all Allen housing is 1990s to 2010s subdivision stock, and the earliest kitchens still have original CPVC supply lines. That pipe is now 20 to 25 years old and gets brittle. Opening a kitchen wall is the best moment you’ll ever have to repipe those runs to PEX – the walls are already exposed, the crew is already there, and the incremental cost is small against doing it as a standalone repair later.
An honest Allen kitchen quote names this as a contingency. If the walls come open and the CPVC looks sound, great. If it’s cracking at the fittings, repiping during the remodel saves you a second round of drywall and paint in three years. Ask any contractor for a quote and see whether the plumbing reality appears at all.
Allen Permits, Loads, and Why Induction Triggers an Electrical Upgrade
Allen’s permitting and inspections run stricter than the newer edges of McKinney and Frisco – and that matters for kitchens. Swapping a gas range for induction, or adding a dual oven, pulls more current than the original 1990s panel and circuit layout was built for. That load change usually triggers a panel upgrade, and a panel upgrade requires its own permit and city inspection.
Handyman-tier “kitchen contractors” routinely skip that step. The result is unpermitted electrical work sitting behind finished drywall – a problem the next buyer’s inspector finds and a problem the city can make you correct at your own cost. We pull the permits, schedule the inspections, and close them out before the job is done. It’s the unglamorous part of a kitchen build that protects your resale.
The 730-Day Done Right Promise, in Kitchen Terms
Workmanship defects in a kitchen show up in year one, not year one month. Cabinet runs that were never shimmed square start to rack and the doors rub. Cambria seams that weren’t properly matched show a hairline gap after the first seasonal expansion cycle. Backsplash and floor tile develop lippage and cracked grout joints as the North Texas clay beneath the slab moves through a full wet-dry cycle.
That defect window is why Groundwork backs every kitchen with the 730-Day Done Right Promise – if it isn’t done right, we make it right, across the full two years most defects need to surface. A 90-day or one-year warranty expires before the seasonal movement that exposes the real problems. Our technicians have up to 12 years of experience, they’re background-checked, and they arrive in uniform.
When you’re ready to talk scope, start with a call to Groundwork Construction Co. or a look at our full Kitchen Remodeling service. From foundation to finish line, one contractor handles the structure, the trades, and the warranty.
Kitchen Remodel Cost FAQs – Allen, TX
A full kitchen remodel in Allen costs $14,000-$45,000, and a small kitchen remodel runs $9,000-$20,000. The bigger number applies when you’re removing a load-bearing wall, repiping 1990s CPVC, or upgrading the electrical panel for an induction range. Call (888) 343-9048 for an exact quote – estimates are free.
Replacing cabinet boxes and doors is usually the better value once the original 1990s boxes have failing hinges and drawer fronts, and cabinet installation in Allen runs $4,000-$13,000. Refacing can work if the boxes are sound, but it doesn’t fix a layout that’s boxed in by a structural wall. Call (888) 343-9048 and we’ll tell you which you actually need.
No – and be wary of anyone who says yes. A load-bearing wall removal needs an engineer’s stamped drawing and a city permit, which typically adds one to three weeks before demolition. The structural work itself runs $4,000-$9,000 plus $500-$1,200 in Allen permit and inspection fees. Call (888) 343-9048 to start the engineering and permit process now.
Yes, for anything structural, electrical, or plumbing – and Allen inspects all three. A load-bearing wall, a panel upgrade for new appliance loads, or a repipe all require permits and inspections. Unpermitted work becomes a resale problem. Call (888) 343-9048 and we’ll handle the permitting and inspections for you.
The fastest way to know what your Allen kitchen will really cost is a walkthrough. Groundwork Construction Co. of Allen gives free project estimates and design consults, answers calls with a live person 24/7, offers 0% financing for 18 months, and takes $1,000 off projects over $10,000. Call (888) 343-9048 today.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












