







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Driveway Replacement Costs in Allen, TX (And the Line Items Most Quotes Leave Out)
Replacing a driveway in Allen, TX runs $5,000-$14,000 for a typical residential slab, and the number you see on a written estimate should already include demo, haul-off, sub-base repair, the city permit, and the pour. Most quotes you’ll collect from lower-tier contractors leave two or three of those out, then add them back as change orders once the old slab is on the ground. If you want one written number that covers the whole job, call Groundwork Construction Co. of Allen at (888) 343-9048 - a live person answers around the clock, and the estimate is free.
Here’s the part nobody puts in the online calculator: the true all-in cost in Allen lands 30-40% higher than square-footage math alone suggests, because of demolition debris, blackland clay underneath, and a permitting-and-HOA sequence that has to happen in the right order.

Why Allen Driveways Cost More Than the Square-Foot Math
Allen built out almost entirely in one 1990s-2000s wave, which means most of the driveways we replace are original concrete from that era. Those slabs were poured thin - often around 3.5 inches with minimal rebar - and spent 25 years sitting on North Texas blackland clay that swells in spring and shrinks hard by August. When a crew pulls one up, the base underneath is frequently compromised: soft spots, settled areas, cracked sub-grade that has to be re-graded and re-compacted before any new concrete goes down.
That base repair tacks $500-$1,500 onto the typical job, and it’s invisible until the old slab is gone. A contractor who quoted you off a photo can’t see it. A contractor who’s replaced driveways across Watters Crossing, Twin Creeks, and Bethany Ridge for years knows to budget for it.
What actually drives the total
- Demolition and haul-off: $1-$2 per square foot on its own. A 500 sq ft driveway generates 3-4 tons of concrete debris that has to be broken, loaded, and hauled to a licensed facility. Plenty of initial quotes quietly omit this.
- Sub-base evaluation and repair: $500-$1,500 when the clay underneath has moved. Skipping it means the new slab cracks within a few seasons.
- HOA architectural review: several Allen subdivisions require pre-approval if the material, finish, or apron configuration changes from what was originally approved. Get this wrong and you can be ordered to modify a driveway you just paid for.
- City of Allen permit and inspection: the city requires an inspection at the sub-base stage before concrete is poured. That step protects you - it’s the last chance to catch a bad base - but it means the job can’t be rushed.
- The pour itself: thickness, rebar or mesh, finish, and any decorative work.
Our technicians have up to 12 years of experience, and we schedule the sub-base inspection proactively rather than building the pour around it after the fact. That single habit is why our timelines hold and why we’re not tearing out a bad slab on our own dime six months later.
What to Look For When You Compare Allen Driveway Bids
You’ll get three or four numbers and they’ll all look different. Here’s how to read them so you’re comparing the same job.
Ask whether demo and haul-off are included. If a bid is dramatically lower than the others, this is usually why. Concrete debris doesn’t disappear on its own, and 3-4 tons of it costs real money to move.
Ask what happens if the sub-base is bad. A good contractor says “we’ll fix it and here’s the range.” A weak one says “we’ll deal with it if it comes up,” which is how a $5,000 job becomes an $8,000 one after you’ve signed.
Ask who pulls the permit and whether the sub-base inspection is built into the schedule. A crew from a neighboring town that isn’t used to Allen’s inspection rhythm will treat it as an obstacle. We treat it as the quality checkpoint it is.
Ask about HOA pre-approval. If you’re in a subdivision with architectural review, changing your finish or widening the apron can require sign-off before the city permit is even issued. We flag this before a shovel touches the ground.
When you’re ready to move from comparing to booking, our Driveway & Pavers service page lays out the materials and finish options that fit an Allen lot, and the Driveway & Pavers in Allen page covers the local install specifics. From there it’s a short step to a written estimate.

Driveway Replacement Cost in Allen, TX
These are the market ranges we work from in Allen. Your final number depends on square footage, existing slab condition, and finish - but this is the honest starting point, and every figure below is what we’d put in writing.
| Line item | Price range |
|---|---|
| Driveway replacement (full job) | $5,000-$14,000 |
| Concrete driveway installation (new) | $4,500-$12,000 |
| Paver driveway installation | $7,000-$18,000 |
| Asphalt driveway paving | $3,500-$9,000 |
| Driveway sealing | $250-$700 |
| Demo and haul-off (existing slab) | $1-$2 per sq ft |
| Sub-base re-grade and re-compaction | $500-$1,500 |
No-hassle upfront pricing means the number on the estimate is the number you pay. No mid-job surprises, no change orders for work that should have been in the bid. And if you’re weighing paver versus concrete, a paver driveway sits at the top of that range but handles the clay movement better over time - worth the conversation.
Large project on the calendar? There’s $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult to start. The finished slab is covered by our 730-Day Done Right Promise - if it’s not done right, we make it right, for two full years against workmanship defects.
What Gets Inspected, and Why It Matters to You
Allen’s sub-base inspection is the step that separates a driveway that lasts 25 years from one that cracks in three. The inspector verifies the base is properly graded and compacted before any concrete is placed. If it isn’t, the pour doesn’t happen - and that’s a good thing, because once concrete is down, the only fix is tearing it out.
We build the inspection into the schedule from day one. That means we’re not rushing a pour to beat a crew’s next job, and we’re not asking you to accept a driveway we wouldn’t put our name on. The 730-Day Done Right Promise backs the finished work for two years, and it’s in writing.
FAQs About Driveway Replacement in Allen
Driveway replacement in Allen typically costs $5,000-$14,000, with the range set by square footage, slab condition, and finish. Add demo and haul-off (about $1-$2 per sq ft) and potential sub-base repair ($500-$1,500), and you’re looking at 30-40% above a bare square-footage estimate. Call (888) 343-9048 for an exact quote - estimates are free.
Most Allen driveway replacements are completed in a single visit for the pour itself, but the full sequence runs longer because of the sub-base inspection the city requires before concrete goes down. We schedule that inspection proactively so the job doesn’t stall. Call (888) 343-9048 and we’ll walk you through the timeline for your specific lot.
In many Allen subdivisions, yes - if the material, finish, or apron configuration changes from what was originally approved, architectural review is typically required before the city permit is issued. Crews from neighboring towns often skip this step, which is how homeowners end up modifying a brand-new driveway. We check your HOA requirements before work begins.
Repair is cheaper when the damage is isolated - a few cracked panels, a settled corner. Replacement makes more sense when the slab is 25-plus years old, has widespread cracking, or the base underneath has failed. On a 1990s Allen driveway poured thin over blackland clay, replacement usually wins on cost per year of service. Call (888) 343-9048 for a straight answer on your slab.
Get a Written Number, Not a Guess
The most useful thing we can do for you is put the whole job in one written number - demo, haul-off, sub-base, permit, pour, and the finish - so nothing gets added after you sign. Call (888) 343-9048 for a free estimate and design consult, and we’ll have a live person on the line, day or night.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












