







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum fence installation in Allen runs $4,000 to $10,000 for most residential properties, with the average landing near $6,500. A typical 150-foot perimeter at 4 feet tall with standard residential-grade panels falls around $5,800. The number moves with linear footage, fence height, panel style, and how much site prep the yard needs.
We’re Groundwork Construction Co. of Allen, and we quote a lot of fence work in this city. Collin County yards have their own quirks: clay-heavy soil that shifts with our wet-dry cycles, HOA rules in subdivisions like Twin Creeks and Watters Crossing, and pool codes that catch homeowners off guard. Below is what aluminum fencing really costs here in 2026, what pushes the price up or down, and how to avoid paying for things you don’t need.
Key Takeaways
- Most Allen aluminum fence projects fall between $4,000 and $10,000.
- Budget roughly $25 to $55 per linear foot installed, depending on height and style.
- Pool-code fencing (required around Allen pools) and sloped yards push projects toward the top of the range.
- Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise.
- Estimates are free, and calls are answered by a live person 24/7 at (888) 343-9048.

How Much Does Aluminum Fence Installation Cost in Allen?
Aluminum fence installation in Allen typically costs $4,000 to $10,000 installed, or about $25 to $55 per linear foot for residential-grade panels. A standard 150-foot, 4-foot-tall fence in a mid-grade finish usually comes in near $5,800. Taller fences, decorative styles, and yards needing new posts and concrete footings run higher.
That range is for a complete job: materials, post setting, panels, gates, and cleanup. It’s not a materials-only estimate, and it’s not a stripped-down-per-foot number that ignores gates and corners. Those are the two most common ways a fence quote surprises a homeowner halfway through a project, and we’d rather you know the full figure on day one.
What a Typical Allen Aluminum Fence Costs by Yard Size
Most Allen residential lots fall in a few predictable sizes. Here’s how the lead range plays out across them:
- Small yard, roughly 100 linear feet: $2,500 to $5,500 installed.
- Standard suburban lot, around 150 feet: $4,000 to $8,000.
- Larger corner or estate lot, 250 feet or more: $7,000 to $10,000 and up.
If your yard sits near the top of the range, it’s usually because of height, style, or terrain, not because aluminum suddenly got expensive. The panel itself is a small part of the total. Labor, post setting, and site conditions carry most of the cost.
Aluminum Fence Installation Cost Breakdown (2026)
Here’s how the money breaks down on a typical Allen project. Use this table to compare bids line by line, because a single “per foot” number hides where contractors cut corners.
| Line Item | Typical Allen Range | Notes |
|---|---|---|
| Aluminum panels and pickets (per linear foot) | $15 – $35 | Residential-grade powder-coated aluminum; premium finishes and decorative styles run higher |
| Posts and post setting | $8 – $18 per post | Includes concrete footings set below the frost-sensitive clay layer |
| Gates (walk-through, 4-foot) | $350 – $900 each | Self-closing and self-latching hardware adds cost but meets pool code |
| Driveway or double gate | $900 – $2,000 | Wider openings need heavier posts and bracing |
| Site prep and old fence removal | $200 – $800 | Hauling off an existing wood fence, clearing roots and debris |
| Slope and terrain adjustment | $300 – $1,200 | Racked panels and stepped posts on grades common in Allen’s newer subdivisions |
| Permit (if required by the city) | $75 – $250 | Varies by project type; pool fencing and taller fences more often need one |
| Total installed (typical lot) | $4,000 – $10,000 | 150-foot perimeter, 4-foot height, standard finish, one walk gate |
Two things drive the total more than anything else: linear footage and gate count. Every gate is essentially a small engineering project, because it has moving parts and has to swing true years after installation. A fence with three gates and 220 feet of panels costs far more than one with a single gate at 120 feet, even when the per-foot material price is identical.
Height matters too. A 4-foot fence is the workhorse for Allen backyards. Bump to 5 or 6 feet for privacy, and you’re paying for taller pickets, heavier posts, and more bracing. Pool enclosures almost always need to hit code height, which we cover below.

What Affects Aluminum Fence Installation Pricing in Allen
Two Allen yards of the same size can price differently by a couple thousand dollars. Here’s what’s actually moving the number.
- Soil conditions. Allen sits on heavy black clay that swells when it’s wet and shrinks when it’s dry. Post footings need to be set deep and bell-shaped so they hold through the seasonal cycles. A contractor who skips that step saves an hour and costs you a leaning fence in two years.
- Pool code requirements. If your aluminum fence encloses a pool, it generally has to meet minimum height and self-closing, self-latching gate requirements. That’s a real cost add, but it’s non-negotiable, and a good installer builds it into the quote from the start.
- HOA rules in Allen subdivisions. Communities like Twin Creeks, Watters Crossing, and Bethany Ridge often specify fence height, color, and visible picket style. A few require design approval before work starts. We account for these in the estimate so the project doesn’t stall mid-install.
- Fence height and style. Standard 4-foot residential panels are the baseline. Privacy-height runs higher, and decorative styles, architectural tops, and premium powder-coat colors all add to the per-foot cost.
- Slope and terrain. Allen’s newer subdivisions have graded lots with real elevation change. Racked panels and stepped posts take more labor than a dead-flat run.
- Gates and hardware. A walk gate, a double driveway gate, and a pool gate all have different price points. Hardware matters too; cheap hinges fail, and the re-drilling and re-hanging costs more than doing it right the first time.
None of these are reasons to say “it depends” and leave it there. Each one has a real dollar impact, and each is something we can price for you before a single post goes in the ground.
How to Save on Aluminum Fence Installation
There’s no magic discount that cuts the number in half, but a few moves reliably trim the total without sacrificing quality.
- Consolidate gates. Every gate is a cost line. If two walk gates serve the same side of the yard, one well-placed gate saves a few hundred dollars and rarely gets missed.
- Skip the roll-off dumpster. If you’re removing an existing wood fence, we can often break it down and haul it for less than renting a dumpster. Ask about removal as its own line item.
- Time the job before peak season. Spring and early summer are the busy months in Allen. Scheduling in late fall or winter can sometimes improve availability and, in some cases, pricing.
- Pick a standard finish. Black powder coat is the industry standard and the most economical. Custom colors and premium architectural styles run higher for the same panel dimensions.
- Get a written, line-item estimate before you commit. The single biggest way to lose money on a fence is a per-foot bid that doesn’t account for posts, gates, or footings. Our estimates are free, itemized, and there’s no charge for calling. Reach us at (888) 343-9048 and we’ll walk you through the numbers honestly.
Financing helps if you’re planning a fence alongside other exterior work. Our standing 0% financing for 18 months and $1,000 off projects over $10,000 apply to fencing as part of a larger project.
Why Aluminum and Why Now?
Aluminum costs more than wood up front and less than it over the long haul. It doesn’t rot, warp, or attract termites the way a cedar fence does in our climate, and it doesn’t need painting or staining every couple of years. In a North Texas yard that swings between humid summers and dry winters, that reliability matters.
The material is also a preferred choice near pools and along property lines where height and visibility rules apply. It’s durable in our heat, it holds its color, and a properly installed aluminum fence typically looks the same in year ten as it did on day one. That’s part of why we lead with it for most residential fence work in this city. If you’re comparing options, our home page covers the full range of services we handle, and our Allen service area page details the neighborhoods we work in.
Is Aluminum Fence Installation Worth It in Allen?
For most homeowners, yes, and the math is simple. A wood fence in Allen might cost $3,500 to $6,000 to install, but you’d likely be replacing or repairing panels within 8 to 12 years given our clay soil movement and summer heat. Aluminum typically lasts decades with almost no maintenance. On a 20-year horizon, it’s often the cheaper option per year, and it holds its curb appeal the whole time.
The other thing worth saying plainly: aluminum fencing holds up better in this climate than most people expect, and it’s the preferred material where HOA design standards or pool codes apply. We’d rather recommend a fence you won’t touch for 20 years than one that requires attention after the first hard freeze.
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost in Allen?
Aluminum fence installation in Allen typically costs $4,000 to $10,000, or about $25 to $55 per linear foot. A standard 150-foot, 4-foot-tall residential fence with one walk gate generally lands near $5,800. Height, gates, pool code requirements, and slope push the total toward the top of the range. Call (888) 343-9048 for an exact quote; estimates are free.
How long does aluminum fence installation take in Allen?
Most standard Allen residential fence installations take one to three days, depending on footage and site prep. Small yards with straightforward terrain often finish in a single day. Larger lots, pool enclosures, and yards with significant slope or old-fence removal can stretch to three days. We’ll confirm a timeline before work starts.
Does a pool fence in Allen need a permit?
Yes, pool fencing in Allen generally requires a permit and must meet minimum height and self-latching gate requirements. Budget $75 to $250 for the permit itself, plus a bit more for the latching and self-closing hardware that meets code. We handle permits as a line item on the estimate, so there are no surprise fees.
Is aluminum cheaper than wrought iron for an Allen fence?
Aluminum is typically 20% to 40% less expensive than wrought iron for the same property size, and it doesn’t rust. For a typical Allen yard, that difference often works out to $1,000 to $2,500 on the total project. Aluminum is also lighter and easier to maintain, which makes it the more practical choice for most residential fencing here.
Can aluminum fence installation be done year-round in Allen?
Yes. Allen’s climate allows aluminum fence installation in every season, though the busy months from March through July book up faster. Winter installs can be scheduled with more flexibility. Call (888) 343-9048 to check current availability; estimates are free and there’s no charge for a consultation.
Get a Fixed, Itemized Estimate for Your Allen Aluminum Fence
You’ve got the numbers. Now comes the part where the actual quote matters more than any guide, because your yard isn’t a 150-foot hypothetical.
At Groundwork Construction Co. of Allen, we quote the full job with every line item written out: panels, posts, footings, gates, hardware, site prep, and any permit fees. No vague per-foot number that gets revised after the digging starts. Calls are answered by a live person 24/7, not a voicemail system. Our technicians have up to 12 years of experience, and every installation is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. You also get $1,000 off projects over $10,000 and 0% financing for 18 months if you’re planning a larger exterior project.
Call (888) 343-9048 today for a free estimate on your aluminum fence installation in Allen. Tell us the linear footage and what you’re trying to enclose. We’ll get you a real number, not a range.
Pricing reflects the Allen market as of 2026. Groundwork Construction Co. of Allen offers free estimates – call (888) 343-9048.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












