







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence Cost in Allen, TX: What You’ll Actually Pay Per Foot
Aluminum fence in Allen runs $4,000-$10,000 installed for a typical residential yard, which works out to roughly $30-$60 per linear foot depending on panel grade. Residential-grade aluminum picket (0.050″ wall) sits at $30-$45/ft; commercial-grade stock (0.080″-0.100″ wall) lands at $42-$60/ft. The gap is $10-$15 a foot, and in a Collin County hail corridor that gap decides whether your fence survives the spring intact. Call (888) 343-9048 for a free, upfront estimate – the number you hear on the phone is the number on the quote.
We’re Groundwork Construction Co. of Allen, and aluminum is one of the few fence materials where the cheapest bid and the smartest bid look identical on paper. They don’t hold up the same way. Here’s what separates them in this market.

The Price Per Foot Isn’t the Whole Story in Allen
Aluminum fence is the low-maintenance, corrosion-free choice, and in Allen those are real advantages. But a hail storm or a straight-line wind event doesn’t care about maintenance schedules. The panels that hold up here are built from commercial-grade stock, not the residential-grade panels that flex and dent under a golf-ball hailstone.
Allen’s housing stock is mostly 1990s-to-2010s subdivision construction – brick-veneer two-story homes on tight lots where the rear fence line takes the full brunt of northwest spring storms. Most of those original wood fences are already on their second or third rebuild by the time a homeowner gets serious about aluminum. That’s the moment to get the spec right, because you’ll own the decision for two decades.
What does the gauge difference actually mean in a hail event?
Residential-grade aluminum panel rails are thin enough to visibly bow between posts after a moderate hail event. Commercial-grade panels maintain their geometry under the same impact load. That’s the practical difference – not a theoretical one on a spec sheet.
For a fence meant to look sharp in front of a $400,000-$600,000 Allen home for 20 years, the $10-$15 per foot upcharge is a 25-year decision, not a line item to trim. We specify powder-coat-finished aluminum only, and that finish is documented in the upfront quote so you know exactly what’s going on the truck.
Why Post Spacing Matters More Here Than Anywhere
Residential aluminum fence is typically installed at 6-8 ft post spacing. In Collin County’s high-gust wind corridor, we recommend 6 ft maximum on exposed rear and side yards to reduce panel flex under derecho-level gusts. A wider span is a longer lever arm, and a longer lever arm is exactly what fails first when a 70-mph gust loads a light panel.
The expansive blackland-clay soil underneath most Allen subdivisions shifts through wet and dry cycles, and that movement works on posts too. Tighter spacing spreads the load and keeps the fence line true as the ground moves under it. It’s one of the first things we check when a homeowner calls us after a neighbor’s fence went down in a blow.

What Aluminum Fence Costs in Allen: Line-Item Pricing
These are the numbers we quote for Allen properties. Every figure below reflects installed cost – panels, posts, gates, hardware, and finishing – not just material.
| Item | Installed Cost Range |
|---|---|
| Residential-grade aluminum picket (0.050″ wall) | $30-$45 per ft |
| Commercial-grade aluminum picket (0.080″-0.100″ wall) | $42-$60 per ft |
| Standard residential aluminum fence project (Allen average) | $4,000-$10,000 |
| Powder-coat finish upgrade (specified on every job) | Included in quote |
| 6 ft post spacing (exposed yards) | Included in quote |
For comparison, a vinyl fence installation runs $3,500-$9,000 in Allen. Vinyl is often cheaper up front, but aluminum wins on longevity in the sun and doesn’t chalk the way low-grade vinyl does. If you want to weigh both, our Fence Installation in Allen page walks through the material trade-offs side by side.
Which Fence Style Will Your HOA Approve?
Aluminum picket fence is frequently the only front-yard fence style approved in Allen HOA communities because it maintains sight lines and matches the traditional neighborhood aesthetic. If you’re in Watters Crossing, Twin Creeks, or Bethany Ridge, your architectural review committee will want to see the product submission before the city ever issues a permit. Getting that ARC packet handled first is what separates a smooth aluminum fence project from a delayed one – and crews from out of town routinely skip that step and leave the homeowner holding the delay.
Those same 1990s-and-2000s subdivisions carry unusually tight architectural controls for a Collin County suburb – even shed placement sometimes needs sign-off. Allen’s permitting and inspection process is stricter than the newer edges of McKinney and Frisco, so the paperwork has to be right the first time.
We’re licensed and insured, our technicians have up to 12 years of experience, and every project falls under our 730-Day Done Right Promise. If the workmanship ever misses, we make it right – that’s the whole point of the guarantee.
What to Look For in an Aluminum Fence Bid
Comparison-shop the spec, not just the number at the bottom. Here’s what a bid should spell out clearly:
- Panel wall thickness stated in thousandths of an inch – not “heavy-duty” or “premium” with no number attached.
- Post spacing written into the contract, especially for exposed rear and side yards.
- Powder-coat finish confirmed over a proper prep cycle. Bare or poorly prepped aluminum oxidizes and chalks in Allen’s UV-intense sun.
- Gates and hardware itemized separately from the linear footage.
- HOA ARC submission included or clearly called out as a step in the timeline.
Our technicians arrive background-checked and in uniform, and calls are answered by a live person 24/7. When a storm rolls through and you need eyes on a leaning fence fast, that matters. For a broader read on how we handle fence work across the trade, see our Fence Installation service page, then swing back to the home page to see how fence work fits into a full exterior plan.
FAQs
Aluminum fence in Allen typically costs $4,000-$10,000 installed, or $30-$60 per foot depending on panel grade. Residential-grade stock runs $30-$45/ft and commercial-grade runs $42-$60/ft. Call (888) 343-9048 for an exact quote – estimates are free.
Repair usually wins when a handful of panels or one gate are damaged; replacement makes more sense once several panels are bowed or the post line has shifted. An assessor can tell you in a single visit which way to go. Call (888) 343-9048 and we’ll walk the fence line with you – no charge for the estimate.
Yes, in nearly every Allen HOA community you need architectural review approval before the city permit is issued. Aluminum picket is one of the most commonly approved styles because it keeps sight lines open. We handle the ARC submission as part of the project so it doesn’t stall your timeline. Call (888) 343-9048 to get that moving.
Often, yes – same-week scheduling is possible when materials and HOA approval are already settled. Weather and panel availability set the real timeline. Call (888) 343-9048 for a live person who can tell you what’s realistic right now.
Get a Straight Answer on Your Aluminum Fence
Stop guessing at per-foot numbers and find out what your Allen yard actually needs – commercial-grade panels, 6 ft post spacing, powder-coat finish, and the HOA paperwork handled before the permit application. Free project estimate and design consult, upfront pricing with no surprises, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (888) 343-9048 today – a live person answers, day or night.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












