







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Allen Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Allen, TX: cabinet installation and refacing, full kitchen remodeling, and quartz or granite countertops built around the KraftMaid boxes already in your home. What makes our KraftMaid work different is that we’ve handled the same model lines long enough to know exactly where they fail, and we price the repair honestly before you commit to anything. KraftMaid kitchens are everywhere in Allen. Getting one serviced well is a different question. Call (888) 343-9048 and we’ll tell you straight whether it’s a repair, a reface, or a replacement.
Why Trust Groundwork Construction Co. of Allen for Your KraftMaid Construction?

Our technicians have up to 12 years of experience, and a good share of that time has involved KraftMaid cabinetry on slab foundations in Collin County. That matters here. Allen homes sit on expansive blackland clay, and the way a cabinet run is shimmed, leveled, and anchored over a slab that moves seasonally has more to do with long-term cabinet performance than the cabinet itself does.
We’re an independent KraftMaid service provider. We are not affiliated with, authorized by, or sponsored by KraftMaid Cabinetry, and we don’t claim to be. What we bring is working familiarity with the Vantage, Momentum, Lifestyle, and Insight series, plus OEM-compatible doors, drawer boxes, and hinges sourced to match your finish and profile. That way existing warranty terms stay intact and you’re not stuck with a mismatched panel in a visible run.
Every project carries our 730-Day Done Right Promise. If the workmanship isn’t right, we make it right. Calls are answered by a live person, 24/7, and technicians arrive background-checked and in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Allen
Most of what we see in Allen isn’t a cabinet failing from normal use. It’s a slow leak, a hinge under strain, or a finish at the end of its service life. Here’s the short list, and the reason behind each one.
- Vantage base cabinet swelling near the dishwasher and sink runs. Vantage boxes use a particleboard core, and particleboard doesn’t forgive moisture. A slow supply-line drip or a disposal fitting that weeps a few drops a day gets into the bottom panel and the stiles. By the time a homeowner sees a soft spot, water has usually wicked into the adjacent box too. Allen’s 1990s subdivision homes are at the exact age where original supply lines and disposal connections start failing, so this is the single most common KraftMaid call we get here.
- Thermofoil delamination on Lifestyle and Momentum doors. The wrap starts lifting at the edges and around pull hardware, and once water gets behind the film it spreads. North Texas summer heat cycles make it worse. A door that’s peeling at two corners can usually be repaired or replaced individually; a run where the film is lifting across the face means new doors.
- Drawer box and glide wear. Side-mount epoxy glides take the load in a heavy-use kitchen, and over 15 to 20 years the rollers flat-spot and the box racks. What reads as “the drawer is broken” is usually a $12 set of glides and ten minutes of work. Undermount slides from a later series hold up better.
- Face-frame and hinge fatigue. Soft-close hinges tighten into particleboard stiles. Every slam and every loaded door works those screw holes a little wider until the hinge pulls loose and the door sags. Once the hole has stripped, a longer screw is a stopgap. The durable fix is a hinge repair plate or a new stile section.
- Box out of square after a slab shift. Clay soil moves, cabinets follow, and doors that closed fine last spring now rub at the top corner. Re-leveling and re-shimming an entire run costs far less than the replacement a panicked homeowner assumes they need.
KraftMaid Parts & Our Repair-vs-Replace Approach

We use genuine KraftMaid doors, drawer boxes, and hinges when you need a finish or profile match, and quality aftermarket glides or soft-close hinges where the OEM part is discontinued or the price doesn’t make sense. We don’t keep KraftMaid parts in local stock. Every part gets ordered to your specific series, finish, and measurement, which is why a door replacement typically takes a couple of weeks rather than a couple of days.
Here’s the honest part. If the carcass is sound and it’s a door, a glide, a hinge, or a leveling problem, we repair. Tearing out good boxes to sell a full remodel isn’t how we operate. Full replacement is the right call when water damage or delamination compromises several boxes in a run, because at that point you’re paying to rebuild around failing material. We’ll show you what we see and price both paths so the decision is yours.
Call (888) 343-9048 for a free estimate and we’ll take a look before anyone recommends a number.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We pull the drawers, check under the sink, and get a moisture reading at the base panel. We identify the exact KraftMaid series so the right parts get ordered the first time. There’s no charge and no pressure at this stage.
- 2
Scope and quote. You get a written line-item price: parts, labor, and countertop work if it’s involved. The number you see is the number you pay.
- 3
Repair or install. Plumb and square the run, re-shim on the slab, fit OEM or aftermarket components, then get the reveals even and the doors closing right. Countertops go back on after the boxes are settled, not before.
- 4
Test. Every drawer opens and closes under load. Every door has consistent soft-close. We check the supply connections we touched.
- 5
Warranty. Workmanship is covered by the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Allen

We work with all four KraftMaid series common to Allen homes: Vantage, Momentum, Lifestyle, and Insight. That covers door replacement, drawer box and glide repair, hinge and soft-close fixes, full box replacement, refacing with a compatible door style, and new cabinet installation when you’re remodeling. We also set quartz and granite countertops, install islands and backsplashes, and handle the plumbing and electrical tie-ins around a full kitchen remodel.
Allen’s housing stock was built out mostly through the 1990s and 2000s, and a lot of it came with KraftMaid. Kitchens from that wave have now hit the point where original cabinets need evaluating rather than assumptions.
We Also Service These Brands
KraftMaid is one part of what we do. We work with Kohler fixtures on the plumbing side, GAF roofing, PGT windows, and Master Halco fencing, and we handle full-scope kitchen, bath, roofing, window, fence, driveway, and home addition projects. One contractor for the whole scope, whichever brand is on the label.
FAQs – KraftMaid Construction Service in Allen
Is Groundwork Construction Co. of Allen authorized by KraftMaid? No. We’re an independent KraftMaid service provider with hands-on experience in these product lines. We’re not affiliated with, authorized by, or endorsed by KraftMaid, and we don’t represent ourselves as such. What we offer is familiarity with the series and their failure points, not a manufacturer badge.
Do you use genuine KraftMaid/OEM parts? Yes, when a finish or profile match matters, we order genuine KraftMaid doors, drawer boxes, and hinges for your series. When the OEM part is discontinued or the price is out of proportion to the repair, we use quality aftermarket glides or soft-close hinges instead. We’ll tell you which one you’re getting and why.
How long does KraftMaid service take? A glide or hinge repair is often a single visit. Door and drawer box replacements depend on part lead time, which typically runs a couple of weeks since we don’t stock KraftMaid parts locally. A full kitchen remodel runs several weeks depending on scope and Allen’s permit and inspection schedule.
What KraftMaid models/series do you cover? Vantage, Momentum, Lifestyle, and Insight. That includes door and box replacement, glide and hinge work, refacing, new installs, and countertop work on all four.
Will service void my KraftMaid warranty? Not if it’s done correctly. Using OEM-compatible parts and matching profiles keeps your existing coverage intact. We’ll flag anything in the scope that could affect your warranty before we start, so there are no surprises later. Call (888) 343-9048 if you’re unsure about your specific situation.
How much does KraftMaid construction cost in Allen? It depends on scope. Line-item ranges for Allen, from a single cabinet install to a full kitchen:
| Service | Price Range (Allen) |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Call (888) 343-9048 for an exact quote. Estimates are free, and projects over $10,000 get $1,000 off.
Book Your KraftMaid Service in Allen, TX
Whether it’s a soft spot at the bottom of a Vantage cabinet in Twin Creeks or thermofoil peeling on a Lifestyle door in Watters Crossing, the first step is the same. Call (888) 343-9048 for a free estimate. A live person answers around the clock. We’ll diagnose it, price it upfront, and back the work with our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Allen.












