







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in Allen: What to Know First
We provide independent Belgard driveway and paver installation, repair, and replacement in Allen, and most residential jobs run three to seven working days from demo to cleanup. Paver driveway installation in Allen typically runs $7,000 – $18,000 depending on square footage, base prep, and which Belgard series you choose; we quote the number upfront and it doesn’t move unless you change the scope. This page is for Allen homeowners who already own Belgard pavers, or who want them, and want straight answers on how the products hold up in North Texas and what honest work on them costs. Call (888) 343-9048 and a live person picks up.
How Belgard Products Fail – and How We Fix Them
Belgard makes a strong paver. Failures we see in Allen are almost never the paver itself. They’re base, drainage, and installation problems specific to how this region’s soil and weather behave. Here’s what we actually find on Belgard jobs:
- Rutting and sinking on the driveway apron (Belgard Mega-Arbel and Mega-Lafitt). These large-format slabs show base failure fast because a small void turns into a visible rock. In Allen, our expansive clay soil swells in spring rain and shrinks hard in summer, and a thin base layer won’t hold. We pull the affected field, re-excavate to proper depth, re-compact in lifts, and reset the pavers. Matching the color lot matters here; we check dye lot before ordering replacements.
- Efflorescence on the shaded north side (Catalina, Dimensions). That white chalky haze isn’t a defect. It’s mineral salts wicking up through moisture trapped under the pavers. In Allen it shows up after heavy spring rains on driveways with weak edge restraint and slow drainage. We fix the drainage path and edge, then treat and let the surface weather out rather than just scrubbing the symptom.
- Edge creep and spreading at the driveway mouth (all Belgard series). The paver edge nearest the street takes tire load and runoff. When the edge restraint or bedding is soft, rows walk outward over a couple of seasons. We reset the perimeter and install proper edge restraint with a staked base so it stops moving.
- Joint sand washout (any series with polymeric sand). Poly sand fails when it’s installed wet or over a base that holds water. We re-groove the joints, dry the field, and reinstall the sand correctly. On Allen driveways we also check slope toward the street; pavers don’t shed water, the slope does.
- Faded or spalling face on older pavers. A paver that’s chalky and losing its surface is usually at the end of its service life, not repairable. We tell you honestly when replacement of a section beats repair, and we match the closest current Belgard series so the patch doesn’t read as a patch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
- 1
Call and walkthrough. A live person answers any hour. We come out, look at the failure, check the base and drainage, and measure the area.
- 2
Straight diagnosis. We tell you whether it’s a paver problem, a base problem, or a drainage problem, and what each fix costs. No guesswork, no vague bids.
- 3
Material decision. For repairs, we match your existing Belgard series and dye lot wherever possible. For replacement, we walk you through which Belgard line fits an Allen driveway and budget. We don’t push the most expensive option.
- 4
The work. Demo, base prep, compaction in lifts, edge restraint, paver setting, and joint sand done right. Driveway work happens on scheduled days, not on promises. You get upfront pricing before we start.
- 5
The check. We walk the finished surface with you, test drainage and edges, and confirm the color match with you standing there.
- 6
The guarantee. Every job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
What Belgard Driveway & Pavers Costs in Allen

These are honest ranges for Belgard work in Allen. Your number depends on square footage, base condition, drainage needs, and which series you pick.
| Job | Typical Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves the price: base depth and soil condition under the existing driveway, how much field has to be pulled for a repair, the Belgard series (large-format runs higher than standard), and drainage and edge work. Bigger-ticket jobs qualify for our $1,000 off projects over $10,000 and 0% financing for 18 months. Every quote is free and itemized. Call (888) 343-9048 to schedule your estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Allen Homeowners Call Groundwork Construction Co. of Allen for Belgard Work
Belgard is one of our trusted brand partners, and we’ve done enough paver work in Allen to know how these products behave in this particular soil and heat. Every job is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential space, in writing. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. Calls are answered by a live person 24/7, so you’re not leaving a voicemail at 9 p.m. waiting until Monday. We work across trades too, with brand partners like KraftMaid, Kohler, GAF, and PGT, so a paver project can connect cleanly to the rest of your home. Upfront pricing, no surprises.
FAQs

Does repairing or replacing my Belgard pavers affect the Belgard warranty? Using proper installation practices and matching Belgard materials keeps you aligned with the manufacturer’s warranty, and as an independent Belgard service provider we follow those practices. We’re not affiliated with or authorized by Belgard, so we can’t speak for their claims process, but we back our own work with the 730-Day Done Right Promise. Call (888) 343-9048 to talk it through.
Can you match my existing Belgard series and color? Usually yes. We match the current Belgard line and check the dye lot before ordering, since pavers from different lots can read slightly differently on a sunlit driveway. If an exact match isn’t available for a discontinued run, we’ll show you the closest options before any work starts. Free estimate: (888) 343-9048.
Should I repair my Belgard driveway or replace the whole thing? Repair wins when the failure is localized (an apron, a settled row, washed joints) and the rest of the field is sound. Replacement makes sense when the base has failed across the driveway or the pavers are at end of life. We’ll tell you which one applies to yours, honestly. Call (888) 343-9048 for an exact quote.
How fast can you get out to look at my Belgard driveway in Allen? We schedule the walkthrough quickly, and a live person takes your call every hour of the day. The actual work is scheduled around material lead time and weather, usually within a few weeks for a full driveway. Call (888) 343-9048 to get on the schedule.
Do you pull permits for driveway work in Allen? Driveway resurfacing and paver replacement usually don’t require a permit, but anything touching the right-of-way or changing drainage can. We’ll tell you what applies to your job before work starts and handle it. Call (888) 343-9048.
Get Your Free Estimate
If your Belgard pavers are rutting, spreading, or washing out, or you’re ready to put in a new Belgard driveway, call (888) 343-9048. A live person answers around the clock, the estimate is free, and the price we quote is the price you pay. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Allen, serving Allen and nearby areas.












