







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Fate, TX: What the Job Actually Involves
Cabinets & countertops in Fate, TX typically run $14,000 – $45,000 for a full kitchen’s worth of new cabinetry and stone or quartz tops, and the work itself takes two to three weeks from demo to final caulk. On a straightforward cabinet swap with no layout changes, most of that money sits in the boxes and the slab; the labor is the smaller slice. Call (888) 343-9048 for a free on-site estimate and we’ll put real numbers on your kitchen instead of a range.
How the Work Runs, Stage by Stage

Cabinet and countertop jobs fail on sequencing, not on materials. Here’s the order we hold to, and where your decisions land.
Stage 1: Measure and template (day 1, about 90 minutes)
We measure every wall, check for out-of-square corners and floor level, and photograph the plumbing and electrical rough-in behind the existing cabinets. On Fate acreage homes this step often runs longer because a previous owner’s remodel left surprises in the wall. You decide door style and finish at this visit, since cabinet lead times drive the whole schedule.
Stage 2: Order and confirm (days 2 – 5)
We place the cabinet order and lock the countertop slab selection. You sign off on a line-item quote before anything is purchased. Semi-custom cabinets from a line like KraftMaid run three to five weeks out, so this is the stretch where the calendar is out of everyone’s hands. Nothing gets demoed until the boxes are on a delivery truck with a date.
Stage 3: Demo and prep (days 1 – 2 of install week)
Old cabinets come out, and we inspect what’s behind them: water damage at the sink base, scorched outlets behind the range, soft subfloor. Plumbing shutoffs get replaced while the wall is open, because doing it later means pulling a cabinet. Any electrical relocation gets roughed in now and inspected before the new boxes go in.
Stage 4: Cabinet set and countertop template (days 3 – 4)
Base and wall cabinets go in level and shimmed, then the countertop fabricator templates the actual installed boxes rather than the drawing. That template is the reason a stone top fits tight to the wall. Template to install is usually five to seven business days in Rockwall County, and you decide edge profile and sink cutout at the template.
Stage 5: Tops, sink, and finish (days 5 – 6)
The slab goes down, the sink and faucet set, and the cabinet hardware gets drilled and hung. We do a final walkthrough together, checking door alignment, drawer glide, and caulk lines. The 730-Day Done Right Promise covers the workmanship from that day forward, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh, and What Each One Costs You
Most of the decisions here trade money against how the kitchen lives ten years from now, not against how it photographs on install day.
- Stock versus semi-custom cabinets. Stock boxes are faster and cheaper but only fit standard wall runs. Semi-custom lets you size the boxes to the room, which matters in Fate’s older ranch homes where a kitchen was never designed to a 3-inch grid. The gap is typically 20 – 30 percent of the cabinet line item.
- Plywood versus particleboard boxes. Plywood holds up better against the humidity swings North Texas throws at a kitchen, and it holds a screw after the fifth time a hinge is adjusted. It costs more up front and it’s the right call in a house you plan to stay in.
- Quartz versus granite versus butcher block. Quartz is non-porous and needs no sealing, which suits busy households. Granite is natural stone with real variation and wants resealing every year or two. Butcher block is warm and repairable but needs oiling and doesn’t love a wet sink area.
- Slab thickness and edge. Standard 3cm slabs are the norm; a thicker built-up edge adds cost without adding strength. A simple eased edge keeps the price down, and a profiled edge adds fabrication time.
- Sink and faucet grade. An undermount sink with a quality faucet from a line like Grohe will outlast a builder-grade drop-in by a wide margin. The sink cutout and undermount mounting are fabrication charges, so decide before the template.
- Drawer and door hardware. Soft-close undermount glides and full-extension drawers are worth the upgrade in daily use. Cheap side-mount glides are the first thing to fail.
What Cabinets & Countertops Cost in Fate, TX

For Fate kitchens, cabinets and countertops together land between $14,000 and $45,000. Cabinet installation alone runs $4,000 – $13,000, countertop installation $2,000 – $6,500, and a kitchen island adds $3,000 – $10,000 on top. Those are the numbers you’ll see on a written quote, and here’s what pushes a job toward one end or the other.
- Kitchen size and cabinet count. A 10-foot galley and a 25-foot wall of cabinets are different jobs even in the same square footage. Linear feet of cabinetry is the biggest single driver.
- Layout changes. Moving a sink, range, or refrigerator means plumbing and electrical relocation, which adds real labor and often a permit. Keeping the appliances where they sit is the cheapest path.
- Material grade. A stock line with laminate tops sits near the low end; semi-custom plywood boxes with a quartz slab and a farmhouse sink push toward the top.
- Existing condition. Rotted subfloor at the sink, out-of-level floors, or a wall that isn’t plumb all add prep time before a single box goes in.
- Permit scope. A like-for-like swap usually needs no permit. Relocating plumbing or adding circuits does, and we pull those and pass the inspections.
A written estimate from us itemizes cabinets, countertop fabrication and install, demo and haul-away, plumbing and electrical allowances, and permit fees where they apply. What it typically doesn’t include is appliance cost, flooring, backsplash tile, and painting, since those belong to other line items. If you’re weighing the tops and boxes as part of a full Kitchen Remodeling in Fate, we’ll scope it together so nothing gets double-charged.
See the difference
Before
After
Before
After
Before
AfterWhat Fate Homes Specifically Do to This Job
Fate (ZIP 75132) is a Rockwall County town mid-build-out along the SH-66 corridor, and that shows up directly in cabinet and countertop work. On the newer subdivision side, homes from the 2000s through the 2020s are brick-and-stone builds with factory-standard cabinet runs, so the job is mostly swapping a builder-grade line for something with real box construction. On the large-lot ranch and farmhouse parcels, the kitchens were never plumb, square, or sized to a standard grid, and a semi-custom line earns its money filling those odd walls. Expansive black clay and the North Texas heat swings move foundations, and a kitchen that was level five years ago may not be now, so we check floor level before we set a single box. Relocating a sink or range in these homes also means opening walls that were framed decades apart from current practice. That’s where a local read matters, and it’s why we cover the whole of Fate with the same crew standards. Homeowners here often pair a kitchen refresh with a Garage Conversion ADU in Fate when they need the extra space.
Serving Fate, TX – Our Local Coverage Area
We serve Fate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Fate

Expect two to three weeks of on-site work, but plan for four to six weeks door to door because cabinet lead times sit in the middle. The install itself is about six working days; the wait on boxes and slab is what stretches the calendar. Call (888) 343-9048 and we’ll give you a real date based on current lead times.
A like-for-like swap generally needs no permit, but relocating plumbing, moving a gas range, or adding electrical circuits does. We pull the permit and handle the inspection so it isn’t your problem. Ask us at the estimate and we’ll tell you plainly which side your job falls on.
Yes, and that’s the most common path. Keeping the sink, range, and refrigerator where they are stays inside the lower half of the price range and skips the permit. If you want a sink moved or a wall opened, that’s a bigger conversation and we’ll price it as one.
Together they run $14,000 – $45,000 for a full kitchen, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500 on their own. An island adds $3,000 – $10,000 if you want one. Call (888) 343-9048 for an exact quote; the estimate is free and it’s on-site, not over the phone.
Every cabinet and countertop job we do is covered by the 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing before you sign. Cabinets and slab carry their own manufacturer warranties on top.
Get a Free Estimate on Cabinets & Countertops in Fate
If you’re ready to price a cabinet and countertop job, call (888) 343-9048. A live person answers around the clock, and we’ll set a free on-site estimate where we measure the room, look behind the existing cabinets, and hand you a line-item quote with no surprises. If you’re also planning the wider scope, our Kitchen Remodeling service covers it, and a New Detached ADU in Fate often pairs with a kitchen upgrade. From foundation to finish line, the number you see is the number you pay.
Written by the team at Groundwork Construction Co.












