







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Heath, TX: What It Costs and How Long It Takes
A chain link fence in Heath, TX typically runs $3,500 – $9,000, installed, and most residential jobs are finished in one to three days. The number depends on linear footage, height, gauge, gate count, and how much site prep the ground needs before posts go in. Call (888) 343-9048 and we’ll walk your property line with you, measure it, and put the numbers in writing before any work begins.
How a Chain Link Fence Gets Built Here, Stage by Stage

This is the part most quotes gloss over, so here’s the real sequence. Each stage has a decision point, and knowing when yours comes up keeps the job moving instead of stalling.
Stage 1: Site walk and line layout (day one, a couple of hours). We meet you on site, walk the property line, and confirm where the fence should sit relative to your survey markers. You decide right here whether the fence runs tight to the line or steps in a foot to leave room for mowing. On larger Heath lots, that setback question matters more than people expect.
Stage 2: Utility locate and layout marking (day one or two). We call 811 and wait for the locate marks before a single post gets dug. You confirm gate placement and swing direction at this point. Changing a gate location after posts are set means re-digging, so this is the decision you don’t want to defer.
Stage 3: Post holes and setting (day one, several hours). Posts go in at consistent depth, set in concrete, and plumbed. On North Texas clay, we set deeper than the minimum to keep posts from lifting through wet-dry cycles. Corners and gate posts get extra concrete. Nobody’s deciding anything here except us, and it’s the slowest part of the job.
Stage 4: Cure and top rail (day two). Concrete needs to set before tension goes on, so this stage is deliberately paced. Top rail and terminal posts get assembled and leveled. You’ll see the skeleton of the fence standing at this point.
Stage 5: Fabric, tension, and gates (day two to three). Chain link fabric gets stretched and tied off, tension bars installed, and gates hung and adjusted. We walk the finished line with you, test every gate, and note anything that needs a tweak. That’s your final decision point: sign off, or point out what doesn’t sit right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Three or four real forks in the road decide how your fence looks and how long it lasts. Here’s the honest version of each.
- Gauge of wire: 11.5-gauge is the residential standard and the right call for most Heath backyards. 9-gauge is noticeably heavier and costs more, but it resists dogs leaning on it and holds up better along property lines where kids and equipment hit it. Choose 9-gauge if your fence takes abuse; skip it for a simple boundary marker.
- Height: 4-foot reads as decorative and keeps the line low; 5-foot is the everyday residential height; 6-foot is the security choice and the one HOA review boards ask about most. Taller means more material and more concrete per post, so the price climbs with each step up.
- Coating and color: Standard galvanized is the budget option and weathers to a dull gray. Vinyl-coated chain link in black or green costs more but blends into landscaping and holds color through North Texas sun far better. If the fence is visible from the street or pool area, the coated version is usually worth it.
- Gate package: A walk gate, a double drive gate, or both. Each gate adds hardware, heavier posts, and concrete, so this is one of the biggest single line items. Decide gate count before layout, not after.
- Top rail and tension wire: A top rail gives the fence its straight, finished look. A bottom tension wire keeps the fabric from curling up over time. Both are small line items that separate a fence that stays tight from one that sags by year three.
What a Chain Link Fence Costs in Heath, TX

Residential chain link in Heath lands between $3,500 and $9,000 for a typical job. Below is how the work breaks down so you can see where your money goes.
| Line item | Typical range |
|---|---|
| Full chain link install (materials + labor) | $3,500 – $9,000 |
| Vinyl-coated upgrade (color, over galvanized) | adds to the base range |
| Walk gate | included in base at most sizes |
| Double drive gate | adds to the base range |
| Tear-out of existing fence | adds to the base range |
Five things push a job toward the low or high end. Linear footage is the obvious driver. Height and gauge stack: a 6-foot 9-gauge fence costs meaningfully more than a 4-foot 11.5-gauge one. Gate count and size add material, heavier posts, and concrete. Site conditions matter on Heath’s larger lots, where roots, rock, or an old fence line can slow digging. Tear-out and disposal of an existing fence is real labor and usually a separate line.
Our written estimate lists footage, height, gauge, coating, gate hardware, and tear-out line by line. Concrete depth and standard post spacing are included. What’s typically not included: survey work if your property line isn’t marked, and any permit fees your HOA or the city requires. Call (888) 343-9048 for an exact quote, and estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Heath Homes Specifically Do to a Chain Link Job
Heath is a small, affluent lakeside city on Lake Ray Hubbard in Rockwall County, and construction here leans toward high-end custom homes and major remodels on large lots rather than tract work. That shapes a chain link job in ways a Rockwall or Forney subdivision never does. On multi-acre parcels, fence runs are longer, and property-line setbacks and gate placement need to account for driveways, outbuildings, and lakefront setback considerations. The expansive clay soils under North Texas move with wet and dry seasons, so post depth and concrete volume are not places to cut corners. Spring hail and thunderstorm seasons also mean exterior work gets scheduled around weather windows, and coated chain link holds up to summer sun better than bare galvanized.
Many Heath properties fall under HOA architectural review, so a fence that meets city permitting may still need board sign-off on height, color, and material before posts go in. That review can add days to the front end. We cover Heath and the surrounding area, so if you’re unsure whether your lot needs a permit or an HOA submission, call and we’ll help you sort out which applies. This is also a job homeowners often pair with ADU Site Prep & Utilities in Heath when they’re adding a structure, or with Door Installation in Heath when a new gate line changes access.
Serving Heath, TX – Our Local Coverage Area
We serve Heath and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Heath

Most residential chain link jobs finish in one to three days. A simple backyard run is often done in a single visit, while longer multi-acre lines with gates and tear-out push toward three days. Sprinkler systems, tree roots, or clay that’s been saturated by spring storms can extend digging time. Call (888) 343-9048 and we’ll give you a realistic window based on your footage.
Heath properties often need both city permitting and HOA architectural review for a new fence, and the requirements depend on your lot and subdivision. Many homes here are also governed by an HOA board that reviews height, color, and material. We’ll help you identify what applies to your property before work starts so there are no surprises mid-job. Call (888) 343-9048 with your address and we’ll walk through it.
Yes, in most cases. We call 811 for utility locates before any digging, which flags buried lines so posts can be set around them. Irrigation lines inside the fence line may need a minor reroute, and we’ll tell you if that’s needed during layout. Anything that requires relocating a line is quoted separately and in writing. Call for an exact quote, and estimates are free.
Most Heath chain link installations run $3,500 – $9,000, depending on footage, height, gauge, coating, and gate count. Vinyl-coated upgrades and double drive gates push toward the high end; a basic 4-foot galvanized backyard run sits near the low end. Our estimate shows every line item so you can see what’s driving the number. Call (888) 343-9048 for your free on-site quote.
Every job we do is covered by our 730-Day Done Right Promise: if the work isn’t right, we make it right. That covers workmanship on posts, tension, and gates. Material warranties come from the manufacturer and vary by gauge and coating. We’ll explain what’s covered in writing before you sign anything. Call for the full details.
Get a Free Chain Link Fence Estimate in Heath
If you’re ready to price a chain link fence for your Heath property, call (888) 343-9048. Someone answers every time, day or night, no voicemail. We’ll set a time to walk your line, measure footage, and hand you a written estimate with upfront pricing and no surprises. As part of a Fence Installation in Heath plan or a standalone project, you’ll see exactly what the chain link will cost and how long it takes. Explore our Fence Installation service, or see all the work we do in Heath.
Written by the team at Groundwork Construction Co.












