







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Lucas, TX: What It Costs and How It Goes In
A chain link fence in Lucas, TX typically runs $3,500 to $9,000 for a residential property line, and most jobs are finished in two to four working days once materials land. The number climbs when you’re fencing acreage, adding gates, or cutting through the caliche and clay that shows up across much of 75002. Call (888) 343-9048 and we’ll walk your lot, set the corners, and give you a written, itemized price before anything gets dug.
How a Chain Link Fence Actually Goes In on a Lucas Lot

We don’t treat a fence like a weekend project, and on Lucas acreage you can’t. Here’s the real sequence so you know what to expect and when you’ll be asked to make a call.
Stage 1: Site walk and layout (day 1, 1 to 2 hours)
We walk the property line with you and confirm where the fence runs, where the gates sit, and where the long runs break. On larger Lucas lots this is also where we flag buried utilities, septic fields, and well lines, because driving posts through a septic line is an expensive mistake. You decide the line and the gate positions here. This is the point where a chain link fence stops being an idea and becomes a marked route.
Stage 2: Utility locate and permit (day 1 to 3)
We call for a locate before a single post gets dug, and it typically clears within 48 hours. If your fence ties into a structure or sits near a property line that needs verification, that gets handled here too. You don’t have to chase any of it. We just need you to confirm the property corners are marked or point us to the plat.
Stage 3: Digging, setting posts, and the ground you’re working with (day 2 to 3)
Posts get set in concrete, and this is the part that varies most in Lucas. Expansive clay means a hole that looks clean in dry weather can turn into soup after a North Texas storm, so hole depth and concrete volume are set to the soil, not a generic spec. Terminal posts at corners and gates get deeper, larger footings because they carry the pull of the whole run. Expect this stage to eat most of a day on a typical residential lot and longer on multi-acre runs.
Stage 4: Rails, mesh, and tensioning (day 3 to 4)
Top rail, tension wire, and mesh get pulled and tensioned. You decide height and mesh gauge before this stage, since those can’t be changed once the roll is cut. A properly tensioned chain link fence has a clean, tight look and doesn’t rattle in wind. A sloppy one sags and stretches at the corners. The difference is labor, not material.
Stage 5: Gates, walkthrough, and cleanup (day 4)
Gate hardware goes on, the swing gets adjusted, and we walk the whole line with you. Any opening, gate latches, and post caps get checked. Debris and spoils get hauled off. At that point the fence is done and you’re looking at a finished line, not a to-do list.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Chain Link Fence
Chain link isn’t one product. The choices below are the ones that actually change how your fence looks, holds up, and costs out. We’ll talk through each and price the ones that fit your property.
- Galvanized vs. vinyl-coated mesh: Galvanized steel is the lower-cost, workhorse option and handles North Texas weather fine. Vinyl-coated (usually in green or black) costs more but blends into landscaping and softens the industrial look. On a semi-rural Lucas property, black or green coated mesh often reads as a real fence line rather than a cage.
- Mesh gauge: A heavier gauge resists denting and stays tighter longer. Thinner mesh is cheaper up front and shows wear faster, especially if you have dogs or livestock pushing against it. If this fence is for containment, go heavier.
- Height: Four feet is the standard residential height. Five or six feet adds privacy and cost. Anything above that starts to look like commercial security fencing and may not fit how your lot should read from the road.
- Post type and gauge: Round posts are standard. Terminal posts at corners and gates get larger diameters because they carry the load. This is where a cheap bid shows up: undersized terminal posts, fence starts leaning within a couple of years.
- Gates: A single walk gate is one decision. Drive gates for trailers, RVs, or equipment are another. On acreage lots, drive gates and gate width are often the single biggest line item, and they change how the whole fence is anchored.
- Top rail and tension wire: Top rail is standard and keeps the top clean. Tension wire at the bottom keeps mesh from lifting and is worth adding where dogs or runoff are a concern.
What Chain Link Fence Costs in Lucas, TX

Most residential chain link fence in Lucas lands between $3,500 and $9,000, with the number driven mostly by linear footage, gates, and how the ground treats a post hole. A straightforward property-line run on flat, dry ground sits at the low end. A multi-acre run with drive gates and difficult digging pushes toward the top.
Here’s what moves the number up or down:
- Linear footage: The biggest driver. Acreage runs add up fast.
- Gate count and type: Walk gates are modest. Wide drive or equipment gates are a meaningful jump because of footing and hardware.
- Soil and grade: Expansive clay and uneven ground mean more concrete per hole and more labor. A long uphill run also means more posts and more digging.
- Height and gauge: Six-foot heavier-gauge fencing costs more per foot than four-foot standard.
- Terrain and access: A fence along a long Lucas driveway or across a wooded back line takes more time to reach and set than a tight suburban perimeter.
Your written estimate will list posts, concrete, mesh, rail, gates, and labor as separate lines. It will also say plainly what’s not in the price, like tree removal, if that comes up. If you’re tying the fence into a bigger site project, it’s often worth pairing the fencing with ADU Site Prep & Utilities in Lucas so the utility runs and fence line are planned together rather than in two separate passes.
See the difference
Before
After
Before
After
Before
AfterWhat Lucas Specifically Does to a Chain Link Fence Job
Lucas isn’t Allen or Plano with a tract lot and a short property line. Most of what we fence here is large, semi-rural acreage in 75002, where the fence line is measured in hundreds of feet, not dozens. That changes the job. Long runs need more terminal posts and more bracing to stay tight over distance. Corridors along driveways and back pasture lines often cross ground that’s been graded once and never touched again, so digging is slower. On ground-up custom builds and major estate expansions, the fence often goes in alongside the driveway and utility work because nobody wants to dig the same ground twice. If your project includes any structure or outbuilding, our Fence Installation in Lucas page covers the wider scope.
The expansive clay soils here are the other big factor. They swell and shrink with moisture, and a fence set with shallow, undersized footings will lean within a couple of seasons. Spring storms and North Texas heat also test galvanized coating and hardware over time, which is why post depth and concrete volume matter more than the fence looks on paper. And on unincorporated lots, septic fields and well lines are real hazards a post can hit. We plan the line around them before we dig.
Serving Lucas, TX – Our Local Coverage Area
We serve Lucas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chain Link Fence in Lucas

Most residential chain link fence jobs in Lucas are done in two to four working days, depending on linear footage, gate count, and how the ground digs. Utility locates and permits can add a day or two up front. On acreage properties, expect the longer end. Call (888) 343-9048 for a timeline built around your specific line.
Whether a permit is required depends on the height, the property line, and whether the location falls inside the city limits or unincorporated Collin County. We check it as part of the job and handle it before we dig. Call (888) 343-9048 and we’ll tell you what applies to your lot.
Yes, and it’s routine on Lucas lots. We route the fence line around septic fields and well lines so no post goes into either. That planning happens during the site walk, before anything is dug. Call (888) 343-9048 to set up the walk.
Most residential jobs run $3,500 to $9,000, heavier toward the top for acreage runs and drive gates. Soil conditions, height, gauge, and gate count are the main variables. Call (888) 343-9048 for a written, itemized estimate.
Yes. Every fence we install is covered by our 730-Day Done Right Promise, and if something isn’t right, we make it right. That covers the workmanship, not damage from storms or vehicles. Call (888) 343-9048 if you want the warranty spelled out before you commit.
Get a Free Chain Link Fence Estimate in Lucas
We’ll walk your line, check the property corners and buried utilities, and hand you a written, itemized price for a chain link fence in Lucas. No change orders later. If you’re also planning a gate or entry work, Door Installation in Lucas is a good companion job to schedule in the same visit. We cover all of Lucas, and this sits within our broader Fence Installation service, so you’re working with one team from layout to final walkthrough.
Call (888) 343-9048 for a free estimate. A live person answers around the clock. Our technicians bring up to 12 years of experience, and every project is backed by the 730-Day Done Right Promise and our upfront pricing, with a free estimate and design consult to start.
Written by the team at Groundwork Construction Co.












