







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Allen: What It Costs and How It’s Scheduled
Concrete driveways and concrete work in Allen typically run $4,500 – $12,000 for a full driveway installation, and most residential pours are finished in 3 – 5 working days from demo to the day you can park on the slab. That range covers standard broom-finish, 4,000 PSI mix, forms, reinforcement, and haul-off. Stamped or exposed-aggregate finishes push higher. Call (888) 343-9048 for a free on-site estimate with a written, line-item quote.
How the Work Actually Runs, Stage by Stage

Concrete work in Allen isn’t a mystery box. Here’s what the schedule looks like on the ground, and what you’re deciding at each point.
- Day 1 – Site walk and layout. We mark the pour boundary, confirm the slope away from the garage and house, and locate any utilities that need to be flagged. You decide the driveway width (typically 10 – 12 feet for a single, 16 – 24 feet for a double) and confirm any HOA design constraints before we touch the ground. This is the stage where Allen’s architectural-review rules matter – more on that below.
- Day 1 – 2 – Demo and excavation. Existing slab comes out, subgrade gets cut to depth (usually 4 inches of concrete over 4 – 6 inches of compacted base, more on heavy-load areas), and the crew hauls off the rubble. Expect a full day for a standard two-car driveway, longer if there’s a stubborn old slab or a lot of root intrusion.
- Day 2 – 3 – Forms, base, and reinforcement. Forms go in, base material gets compacted in lifts, and rebar or mesh gets placed. You don’t decide much here, but this is where we confirm expansion joints and control joint layout – the cuts that keep the slab from cracking in Allen’s expansive clay.
- Day 3 – 4 – The pour and finish. Concrete arrives, gets placed, screeded, and finished in whatever surface you chose (broom, exposed aggregate, stamped). Cure time matters most in summer; we schedule early-morning pours to keep the mix from setting too fast in the heat.
- Day 4 – 5 – Cure and cleanup. You stay off the slab 24 – 48 hours minimum, longer for heavy vehicles. We pull forms, backfill edges, and walk the finished pour with you. Full cure takes up to 28 days, but foot traffic and light use come much sooner.
If your project is part of a full Driveway & Pavers in Allen scope with a widened apron and walkway, the sequencing adds a day or two on the front end for layout.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Choose Between
Most of the decision-making on a concrete driveway comes down to mix, finish, and reinforcement. Here’s the honest trade-off on each.
- Standard broom finish. The default for a reason. $4,500 – $12,000 for a full driveway, good traction, holds up to Texas sun. Doesn’t hide stains as well as textured finishes.
- Exposed aggregate. Pea gravel is seeded into the surface and the cream is washed away. More slip resistance, catches less glare, but the surface can wear unevenly over 15 – 20 years and is harder to patch invisibly.
- Stamped or scored finishes. Decorative scoring gives a tile-like look without a pavers budget. Costs more than broom but less than a full paver install. Note: if you’re leaning toward a stamped look, that has its own scope and lives on our Driveway & Pavers side of the house.
- Reinforcement: rebar vs. mesh. Rebar (usually #3 or #4 grid) handles North Texas clay movement better than welded wire mesh, at a modest upcharge. On a slab that will see heavy trucks or a slope, rebar is the right call.
- Fiber-reinforced mix vs. standard 4,000 PSI. Fiber additive reduces plastic shrinkage cracking and runs a few hundred dollars more. For Allen’s summer pours, it’s cheap insurance.
- Joint sealant. A quality sealant in the control joints keeps water from freezing and expanding – less of a concern here than up north, but still worth the small line item.
What Concrete Driveways & Concrete Work Costs in Allen, TX

Concrete driveway installation in Allen runs $4,500 – $12,000 for a standard two-car pour with broom finish, forms, reinforcement, and haul-off. A driveway replacement, where we’re pulling an existing slab first, lands in the $5,000 – $14,000 band once demo and disposal are included. About a third of the jobs we quote come in under $6,000; those are smaller single-width pours or additions to an existing driveway.
What pushes a job toward the high end:
- Size and shape. A straight 400-square-foot pour is a different job from a curved, flared 800-square-foot driveway. Every extra foot of forming and finishing costs.
- Existing condition. Removing a 30-year-old slab with rebar embedded and hauling it out runs $800 – $2,000 depending on access and dump fees.
- Access and grading. If a truck can’t get close to the pour site, or the yard needs serious regrading to shed water, expect a line item for it.
- Finish choice. Broom is baseline; exposed aggregate and scoring add cost.
- Permit scope. A driveway replacement permit in Allen is straightforward. If the work triggers a right-of-way or drainage review, plan for extra inspection time.
Every written estimate we hand you lists each of these as its own line – no “allowances” that balloon later. Our upfront pricing means the number on the estimate is the number you pay. Call (888) 343-9048 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Allen Homes Specifically Do to This Job
Allen’s 1990s – 2000s subdivision stock shapes the way concrete work here actually runs. Homes in Watters Crossing, Twin Creeks, and Bethany Ridge are mostly on North Texas’ blackland clay, and that clay is the real driver. It expands when wet, contracts hard in summer drought, and it will crack a slab that was poured with too few control joints or a base that wasn’t compacted properly. We specify joint spacing and base depth for clay conditions, not for a generic pour.
The other Allen-specific factor is the HOA layer. Most of these communities require architectural-review pre-approval before a city permit is issued – that includes driveway width and material changes, and crews from nearby towns routinely skip the step and end up getting the homeowner a violation notice. We pull the ARB requirements before the first form goes down so the finished driveway matches what the community approved.
If your driveway work ties into a garage or detached structure, homeowners often pair this with ADU Site Prep & Utilities in Allen, where we handle the slab and utility rough-in at the same time to avoid a second excavation. And when an opener or garage door gets replaced as part of the project, that runs through Door Installation in Allen.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Allen

A standard two-car concrete driveway takes 3 – 5 working days from demo to forms-off, with a 24 – 48 hour no-parking window after the pour. Larger pours, stamped finishes, or jobs that need a driveway replacement permit add a day or two. Call (888) 343-9048 to get a schedule sized to your property.
Yes, a driveway replacement or new driveway generally requires a city permit in Allen, and HOA communities add an architectural-review step before the city issues it. We pull the permit and handle the ARB submission as part of the job. That’s part of our standard scope, not an add-on. Call for details on your specific community.
Sometimes. An overlay is possible when the existing slab is structurally sound and the grade allows, but most Allen driveways old enough to need work have cracking or settled sections that make a full replacement the honest recommendation. We’ll tell you which is right at the estimate, not after. Call (888) 343-9048.
Concrete driveway installation in Allen runs $4,500 – $12,000, and a full replacement runs $5,000 – $14,000 with demo and disposal. The biggest cost drivers are size, existing slab condition, access, and finish choice. Call (888) 343-9048 for an exact quote – estimates are free.
Every concrete job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Our technicians have up to 12 years of experience. We also pull permits and pass inspections as part of scope.
Get a Written Estimate for Concrete Work in Allen
We’ll walk your property, check the existing slab and grade, and hand you a line-item estimate with the finish options priced out. It’s free, it’s written, and there’s no pressure to sign on the spot. If you’re covering the full property, our driveway & pavers service and the wider Allen coverage make it easy to keep everything under one team. Calls are answered by a live person, 24/7. Call (888) 343-9048 to schedule your free estimate.
Written by the team at Groundwork Construction Co.












