







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom vs Stock Kitchen Cabinets in Allen, TX: The Honest Answer
Choose semi-custom cabinets unless your Allen kitchen has a truly unusual layout or your budget is wide open. Stock cabinets ship in 1-2 weeks but are built in fixed 3-inch increments that leave filler strips in most Allen subdivision kitchens. Full custom gives you exactly the size and shape you want but takes 10-16 weeks to fabricate. Semi-custom from a brand like KraftMaid lands in the middle: 3-6 weeks, sized to the inch, at $150-$280 per linear foot installed. Call (888) 343-9048 and we’ll walk your kitchen and tell you which tier actually fits.

Why the Stock vs Custom Debate Misses the Middle Tier in Allen
Allen was largely built out in a single 1990s-2000s growth wave, which means most of the kitchens we open up here were framed quickly to standard builder dimensions. Those dimensions were never actually standard. Stock cabinet lines come in 3-inch increments, so a wall that measures 89 inches gets an 88-inch cabinet and a filler. In a freshly built rectangular kitchen, that filler disappears. In Allen, with its angled ceiling transitions and soffit lines, it doesn’t. One of our installers on a recent Watters Crossing job spent two hours shimming a 2-inch gap that a semi-custom order would have eliminated at the factory.
Semi-custom exists precisely for this gap. KraftMaid builds to the inch, offers cabinet heights and crown options that meet a 9-foot ceiling without a soffit, and still ships in the 3-to-6-week window that keeps a project on track. That’s why, for most Allen homes, it’s the answer the “custom vs stock” framing misses entirely.
What Does Each Cabinet Tier Actually Cost in Allen?
Most Allen kitchens run 25-45 linear feet of cabinet, which is a useful anchor because the tier you pick multiplies across the whole run. Here’s what the three tiers look like on a 35-foot Allen kitchen:
| Tier | Cost per linear foot (installed) | Lead time | Fits to | 35-ft kitchen total |
|---|---|---|---|---|
| Stock | $80-$150 | 1-2 weeks | 3-inch increments | $2,800-$5,250 |
| KraftMaid semi-custom | $150-$280 | 3-6 weeks | 1 inch | $5,250-$9,800 |
| Full custom | $280-$600+ | 10-16 weeks | Any dimension | $9,800-$21,000+ |
Most Allen kitchens that get new cabinets land inside our Kitchen Remodeling in Allen range of $14,000-$45,000 once you fold in countertops, backsplash, and labor. Cabinet installation alone typically runs $4,000-$13,000. Silestone or Caesarstone tops add $2,000-$6,500; a backsplash runs $800-$2,500. Want to see where your kitchen lands? We price it upfront, no surprises, and nothing gets added after the fact.
The lead-time difference matters more in Allen than people expect. A full kitchen remodel permit in Allen takes 10-21 business days to issue. If you order semi-custom cabinets the same day your permit goes in, the cabinets typically arrive around permit issuance. Full custom placed at the same moment will show up 8-12 weeks after you’re ready to install, which means your project sits idle and your displaced kitchen stays torn apart longer. For most Allen families, that’s a real cost, even if it doesn’t show on the invoice.

The Construction Difference You Actually Feel
Stock cabinets are typically staple-and-glue construction: plywood or particle board boxes stapled together and reinforced with glue. They hold together fine for a decade under light use. In a busy Allen kitchen getting opened 20 times a day for the next two decades, they start to loosen at the joints and the drawers don’t slide the way they did in year one.
KraftMaid’s semi-custom line uses mortise-and-tenon face frames and dovetail drawer boxes. Mortise-and-tenon is an interlocking joint held by wood into wood, not staples; dovetail drawers are cut so the drawer sides lock into the front panel under load. Neither detail shows in a photo. Both get felt every time a drawer opens after year ten. That’s the part of the decision that “custom vs stock” comparisons rarely get to, and it’s the reason we steer Allen kitchens toward semi-custom when the budget allows it.
The Permitting and HOA Reality in Allen
Allen is strict on permitting in a way neighboring McKinney and Frisco’s newer edges are not. If your kitchen renovation opens walls or moves plumbing or electrical, you’ll pull a city permit, and inspections are detailed. And if your home sits inside an HOA subdivision (Watters Crossing, Twin Creeks, Bethany Ridge, and most of the 1990s and 2000s stock), architectural-review pre-approval may be required before the city permit is issued. Cabinets themselves usually don’t trip that review, but the schedule does: two layers of approval stretch your project by weeks.
Semi-custom cabinet lead times absorb that stretch; full custom compound it. If you’re lining up a full Kitchen Remodeling, plan the cabinet order around your permit date, not after it.
Common Allen Scenarios Where the Tier Choice Flips
We’ve walked enough Allen kitchens to see the pattern. These are the ones that keep coming up:
- 9-foot ceilings with a soffit. Very common in the 1990s traditional and Tudor homes here. Semi-custom cabinet heights and crown options kill the soffit and give you ceiling-height cabinetry without custom pricing.
- Angled ceiling transitions. Sometimes stock filler strips fight the angle so badly the eye reads it immediately. Semi-custom handles the angle; custom handles it for twice the money and four times the lead time.
- Galley kitchens with a wall that measures 88.5 inches. Stock leaves a 0.5-inch gap, so we shim it, and a shimmed cabinet never quite looks right. Semi-custom sizes to the half-inch.
- Kitchens being prepped for resale. Photographs and HOA comps reward matching finishes inside and out. KraftMaid’s color-matched interiors look clean in listing photos; stock cabinets with white interiors behind wood doors always look mismatched.
- Truly unusual layouts. An L-shape wrapped around a load-bearing column, or a kitchen extended into an addition. This is the scenario where custom earns its price and lead time.
Stock, Semi-Custom, or Custom: A Straight Recommendation
If your Allen kitchen has a standard footprint and your timeline matters (as it does for most working families here), KraftMaid semi-custom is our default. You get near-custom sizing, a 3-6 week lead time that fits Allen’s permitting calendar, and construction quality that survives the next 20 years of school-morning chaos.
Pick stock only if the budget is genuinely tight and the room is a simple rectangle without the soffit or angle problems above. Pick full custom only if the layout truly can’t be solved in a semi-custom line, or if you have a long runway and the budget to match. Every project we sign is covered by our 730-Day Done Right Promise, so whichever tier you choose, if it’s not done right, we make it right.
Why Groundwork Construction Co. of Allen for This Decision
Groundwork Construction Co. of Allen has been in business since 2014 and has proudly served local communities for over 42 years across our markets. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform. We pull the Allen permits, coordinate the architectural-review paperwork, and price it upfront before a single cabinet is ordered. Calls are answered by a live person 24/7, because a kitchen that’s torn open at 9 p.m. doesn’t wait until Monday morning. Financing at 0% for 18 months and $1,000 off projects over $10,000 are standard offers, and a free project estimate and design consult is how every kitchen starts.
FAQs
Stock cabinets are cheaper upfront at $80-$150 per linear foot installed versus $150-$280 for semi-custom KraftMaid. But stock often needs filler strips, shims, and soffit work in Allen’s 1990s kitchens, which adds labor back. Semi-custom frequently ends up within a few hundred dollars of the “cheap” option once filler and fit work is priced in. Call (888) 343-9048 and we’ll run the actual numbers on your kitchen – the estimate is free.
Semi-custom KraftMaid cabins typically land in 3-6 weeks. Allen kitchen permits take 10-21 business days to issue, so if you order cabinets the same day you submit the permit, they usually arrive close to permit issuance. That keeps you on schedule without warehousing costs. Confirm your exact dates with us by calling (888) 343-9048.
Sometimes – a simple rectangle kitchen with no soffit problems and standard dimensions can sell fine on stock. But Allen’s HOA neighborhoods reward kitchens that photograph well and function durably. Semi-custom with matched interiors reads better in listing photography than stock cabinets with mismatched finishes. Worth a quick conversation: call (888) 343-9048.
Yes. We walk your Allen kitchen, measure every inch, and lay out what each tier will actually cost and how long each will take. No pressure, no sales pitch, just the numbers. Our free project estimate and design consult covers exactly this. Call (888) 343-9048 to schedule.
The Bottom Line
If your Allen kitchen was built in the 1990s or 2000s, semi-custom is almost certainly your best answer. Stock shortchanges your fit, full custom overruns your timeline, and semi-custom lands where both work. If you’d rather have it looked at, Groundwork Construction Co. of Allen offers a no-pressure assessment in Allen – call (888) 343-9048 for a free estimate.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.


