







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Installation Cost Per Foot in Allen, TX: Real Numbers, HOA Rules, and What Actually Drives Your Total
Fence installation in Allen runs roughly $22-$38 per foot for cedar privacy, $28-$45 per foot for vinyl, $30-$55 per foot for aluminum, and $45-$90 per foot for wrought iron - installed, permit included, with most full-property jobs landing between $3,500 and $9,000. Those are honest Allen-market numbers. But the number that ruins budgets here usually isn’t on a price sheet at all: it’s the HOA approval that never happened. Call (888) 343-9048 and we’ll walk your material, height, and review requirements before we quote a single foot.

Why cost-per-foot is the second question in Allen
Allen homeowners who shop fence installation by cost-per-foot are asking the second question. The first question is: what will your HOA actually approve? In communities like Twin Creeks and Watters Crossing, that answer determines your material, your height, and sometimes your contractor - before you ever discuss price. The 1990s-2000s HOA subdivisions across Allen were built with architectural controls baked into the deed restrictions, and those controls outlast the builder. Roof color, fence height, and even shed placement can require pre-approval before a city permit is issued.
Build the wrong fence height or a wood fence where vinyl is specified in Twin Creeks and you can be looking at a mandatory tear-out at your own expense. That’s not a scare tactic - it’s a routine outcome when an out-of-area crew skips architectural review because it doesn’t know the subdivision exists. A fence that should have cost $6,000 becomes a $12,000 lesson. Cost-per-foot only means something after the fence is approved to stand.
The two-step approval process most crews skip
In Allen’s deed-restricted subdivisions, fence approval is a two-step sequence, and the order matters.
- Step one - HOA architectural review committee. You submit a site plan showing the fence line, a material spec sheet, and a color sample. The committee meets on its own schedule, so this adds real calendar time (often two to four weeks depending on the community) before a nail is driven.
- Step two - City of Allen permit. Once architectural approval is in hand, the city permit follows. Allen’s permitting and inspections are stricter than the newer edges of McKinney and Frisco, and the fence inspection is a real inspection, not a formality.
Contractors driving in from nearby towns routinely skip step one - because their home markets don’t have this layer. When that fence fails architectural review after it’s built, removal is on the homeowner, not the contractor who skipped the paperwork. We approach every Allen fence through architectural review first, then permitting. That’s part of what separates real Fence Installation work from a crew that just happens to own post-hole diggers.

What actually moves the price per foot in Allen
Allen’s blackland clay and the post-heave problem
Most of the cost variance that matters in Allen isn’t material - it’s geology. The blackland clay under these subdivisions is expansive, meaning it swells when wet and shrinks when dry. A fence post set shallow in that soil will heave and lean within two to three seasons, and then you’re paying twice. We set posts to a minimum 36-inch depth with concrete collars extended slightly above grade to shed water away from the post base. That’s a spec budget crews skip because it costs more per post in concrete and labor. It also decides whether your fence is straight in year three.
Height caps, gate hardware, and concrete volume
Most Allen HOAs cap side-yard fences at 6 feet and rear fences at 8 feet - so a taller fence than your community allows is money spent on a fence you’ll take down. Beyond height, what drives the per-foot variance:
- Post depth and concrete volume per post. Deeper posts and bigger footings cost more per set - and pay back in a fence that stays plumb.
- Gate hardware. A self-closing, sag-free gate assembly adds real cost over a plain panel.
- Panel height and material spec. Cedar privacy versus vinyl versus ornamental metal changes both the material line and the HOA conversation.
- Removal and haul-off. Tearing out an old fence and hauling it off is its own line item.
Allen fence installation cost per foot, by material
These are installed ranges for the Allen market, permit included. Your actual number depends on linear footage, height, gate count, and site conditions.
| Material | Installed Cost |
|---|---|
| Cedar privacy wood fence | $22-$38 per ft |
| Vinyl fence | $28-$45 per ft |
| Aluminum fence | $30-$55 per ft |
| Wrought iron fence | $45-$90 per ft |
| Vinyl fence installation (typical full job) | $3,500-$9,000 |
| Aluminum fence installation (typical full job) | $4,000-$10,000 |
Material choice connects to brand and spec: we work with established fence and exterior brands including Tamko and Boral across our trades, so the material spec you submit to your HOA is a spec we stand behind. For a full walkthrough of our fencing work, see Fence Installation in Allen.
Why the 730-Day Done Right Promise matters on a fence
A fence that leans, heaves, or loses panels within two years of installation is a workmanship failure - not bad luck, not “the soil.” Groundwork Construction Co. of Allen backs every post set against that standard in writing through our 730-Day Done Right Promise: if it isn’t done right, we make it right. Two full years of coverage on the part of the job most likely to fail - the posts in that clay.
That guarantee sits alongside the way we work: calls answered by a live person 24/7 (no voicemail, no waiting until Monday), background-checked uniformed technicians on every job, and upfront pricing where the number you see is the number you pay. Our technicians have up to 12 years of experience, and we bring a curated portfolio of trusted brand partners - the same standard we hold on home projects across every trade. If you’re planning more than a fence, our crews also handle roofing, windows and doors, driveways and pavers, and home additions and ADUs - all under the same 730-Day promise. Homeowners in neighboring McKinney and Frisco get the same treatment, and Allen’s HOA layer is why local review knowledge matters most here.
FAQs
Fence installation in Allen runs about $22-$38 per foot for cedar privacy, $28-$45 per foot for vinyl, $30-$55 for aluminum, and $45-$90 for wrought iron - installed and permit included. Most full-property fences land between $3,500 and $9,000. Call (888) 343-9048 for an exact quote - estimates are free.
Yes - in Allen’s deed-restricted communities like Twin Creeks and Watters Crossing, you need architectural review committee approval before the city permit is issued. Submit a site plan, material spec, and color sample first. Skipping that step can trigger mandatory removal at your expense. We handle the review sequence so it doesn’t happen to you.
It can, if posts are set shallow in Allen’s expansive blackland clay - most leaning fences here heave within two to three seasons. The fix is depth and drainage: posts set to at least 36 inches with concrete collars extended above grade to shed water. That’s the spec we build to, and the 730-Day Done Right Promise backs it in writing.
Repair usually wins when damage is isolated to a few panels or one gate, while full replacement makes more sense when posts are already heaving or more than a third of the fence is failing. Given Allen’s clay, a leaning fence rarely stops leaning - replacement with properly set posts is often the cheaper long game. Get a free estimate and we’ll tell you straight which is which.
Get your Allen fence priced the right way
Before you compare dollars per foot, find out what your HOA will approve and what Allen’s clay demands of the posts. We’ll walk your property, check your community’s restrictions, and hand you an upfront price with no surprises - plus $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 343-9048 for a free estimate, any hour.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












