







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in Allen, TX
A walk-in shower installation in Allen typically runs $4,200 to $11,500 for most homes, with a curbless, tiled, glass-enclosed build landing near the top of that range. If you’re replacing a tired tub-and-surround combo or finally removing the step-over that’s been a hazard for aging parents in the house, this is one of the highest-return bathroom projects you can take on. Groundwork Construction Co. of Allen builds walk-in showers as part of full-scope bathroom remodeling, which means the waterproofing, tile, plumbing rough-in, and glass all get handled by one accountable team instead of three subcontractors pointing at each other when something leaks. Call (888) 343-9048 and a live person picks up, any hour, any day.
Allen has a lot of homes built between the late 1990s and the early 2010s, and a large share of them still have the original 60-inch tub insert with a framed glass slider. Those showers were built to a builder-grade standard, and after 20-plus years of hard North Texas water, the caulk lines are failing, the fiberglass is chalking, and the shower pan is a coin flip. We’ve torn out enough of them in Twin Creeks and Bethany Ridge to know exactly what’s hiding underneath. What we do about it is what separates a shower that lasts 30 years from one you’re re-caulking every spring.
Our technicians bring up to 12 years of experience to every walk-in conversion, they’re background-checked, and they show up in uniform. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to the waterproofing membrane under your tile just as much as it applies to the finish work you can see.

Key Takeaways
- Walk-in shower installation in Allen runs roughly $4,200 to $11,500 depending on size, tile, glass, and whether the drain needs to be relocated.
- Curbless (zero-threshold) designs cost more because the floor framing and slope have to be reworked, but they’re the safest option for aging-in-place.
- Waterproofing is the part you can’t see and the part that matters most. We use a bonded sheet or liquid membrane over cement board, never drywall behind tile.
- Most single-shower conversions are finished in 5 to 9 working days once materials land.
- Groundwork backs every walk-in shower with a 730-Day Done Right Promise and upfront pricing you approve before we start.
When You Need Walk-In Shower Installation
Most Allen homeowners who call us about a walk-in shower aren’t starting from zero. They’re reacting to something. Here are the scenarios we run into most often in this city, and each one points to a different scope of work.
- The step-over has become a safety problem. A parent or grandparent is now living in the house, or you’re planning for it. A 15-inch tub wall is a real fall risk, and a curbless walk-in with a linear drain and a fold-down bench solves it without turning the bathroom into a hospital room. This is the single most common reason Allen homeowners call us for this project.
- The original shower is failing. Builders in Allen put in a lot of fiberglass and acrylic surrounds in the 2000s. When the pan cracks or the surround separates from the wall, water gets behind it. We’ve found rotted subfloor and soft studs behind more than a few of these in the Watters Crossing area, and once that happens a patch job is throwing money at a bigger problem.
- You want a shower that actually fits the room. Plenty of Allen homes have a hall bath that’s too tight for both a tub and a separate shower. A walk-in shower reclaims floor space and makes a 5×8 bathroom feel twice as large.
- Hard water has wrecked the finish. Allen’s water runs hard, and it etches glass, stains grout, and dulls fixtures faster than most homeowners expect. A rebuild with a proper waterproofing system, epoxy grout, and a quality glass coating holds up far better than the builder original.
- You’re remodeling the whole bathroom anyway. If the tile is coming out, the vanity is going, and the lighting is being reworked, that’s the cheapest time to do the shower you actually want. Doing it piecemeal later costs more because you’re paying twice for demolition and waterproofing.
- The shower is leaking into the room below. If you’ve got a water stain on the ceiling under an upstairs bathroom, stop using the shower and call us. A failed pan or membrane is a structural issue, not a cosmetic one, and it gets more expensive every week you wait.

Our Walk-In Shower Installation Process
We don’t hand you a bid and disappear. Here’s exactly how a walk-in shower project moves from first call to final walkthrough with Groundwork Construction Co. of Allen.
- Free estimate and design consult. We come out, measure the space, look at what’s behind the existing walls where we can, and talk through layout options: curbless versus low-curb, linear versus center drain, bench or no bench, glass panel versus full enclosure. You get a written, upfront price before anyone touches a tool. No-hassle pricing means the number you see is the number you pay.
- Material selection from our brand partners. You pick tile, fixtures, and glass from a curated set of top-tier brands rather than whatever’s on the shelf at the nearest big-box store. For shower valves we typically steer homeowners toward Moen or Delta trim, and American Standard makes a solid line of shower bases and drains. We order everything up front so there are no mid-project surprises.
- Demolition and inspection of what’s underneath. The old surround, pan, and any tub come out. This is where we find the surprises, and we tell you straight if there’s rot, a bad rough-in, or cast-iron drain issues. Any scope change gets priced and approved in writing before we proceed.
- Plumbing rough-in and framing. Drain relocation if needed, new valve install, and framing adjustments for the new layout. If you’re going curbless, the floor framing gets recessed and re-sloped, which is the most technical part of this job and the part most cheap installs get wrong.
- Waterproofing. Cement backer board, all seams taped and mudded, then a full waterproofing membrane over every surface including the pan and the niche. This step isn’t glamorous but it’s the entire difference between a shower that lasts and one that rots a wall out in four years. We don’t skip it and we don’t cut corners on it.
- Tile, glass, and fixtures. Tile set, grout, then templating and installing the glass enclosure to the actual opening rather than to a nominal measurement. Final trim, caulk, and a full test run of the shower before we hand you the keys.
Most single-shower conversions finish in 5 to 9 working days once your materials are on site. Larger bathrooms where we’re also replacing the vanity, flooring, and lighting run longer, and we’ll tell you the actual timeline in your estimate rather than promising a number and missing it.
Walk-In Shower Installation Pricing in Allen
Here’s what walk-in shower installation actually costs in the Allen market. These are ranges for a full tear-out and rebuild, not a surface-level refacing, and the final number depends on size, tile, glass, and what’s hiding behind the old wall. You’ll get an exact, upfront price in writing before we start.
| Scope | Typical Range in Allen |
|---|---|
| Basic walk-in shower, tile surround, standard glass | $4,200 – $6,800 |
| Mid-grade shower, custom tile, frameless glass, bench | $6,800 – $9,400 |
| Curbless shower with linear drain and custom tile | $9,400 – $11,500 |
| Drain relocation (if the existing drain is off-center) | $600 – $1,400 |
| Frameless glass enclosure (custom fabricated) | $1,200 – $2,800 |
| Subfloor or framing repair from prior water damage | $400 – $2,000 |
What moves the price most: size (a 36×60 shower costs less in tile and glass than a 60×60), tile selection (a large-format porcelain is cheaper to install than a small mosaic or a natural stone), glass (frameless custom glass costs more than a framed slider), and what we find when we open the wall. A shower that’s been leaking quietly for two years can turn a $5,000 job into a $7,500 job once the subfloor gets replaced. We don’t hide that risk. We price what we can see, disclose what we can’t, and get your approval before we spend the difference.
To make a full bathroom remodel financially workable, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Those are standing offers, not limited-time gimmicks. The free estimate and design consult is exactly that: free. Call (888) 343-9048 to schedule yours and get a real number for your Allen shower.
Waterproofing: The Part That Decides How Long Your Shower Lasts
If you take one thing from this page, take this. The tile and glass are the cosmetics. The waterproofing is the shower. A walk-in shower is a wet-room, and the entire purpose of a proper build is to keep water from ever touching wood, drywall, or the framing behind the tile. When we open up an old shower and find a failing pan or a surround installed straight onto drywall, that’s not a cosmetic defect, that’s a slow leak that’s been feeding mold behind the wall for years.
Our waterproofing approach: cement backer board over the studs, all seams taped and mudded, then a continuous waterproofing membrane across the walls and the pan, tied into a proper pre-slope under the tile. Weep holes clear, drain clamping collar installed correctly, corners and penetrations sealed with the manufacturer’s own materials. None of this is visible when the job is done. All of it is covered by the 730-Day Done Right Promise, which is the point of a written guarantee that long. If water gets where it shouldn’t in the next two years, we make it right.
If you want to check the quality of any contractor’s shower work, ask them one question: what waterproofing system do you use, and can I see a photo of a pan before tile goes over it? A contractor who can answer that in detail is a contractor worth hiring. A contractor who says “we just tile over the pan” is a contractor you should not hire.
Why Allen Homeowners Call Groundwork
We’re a full-scope home construction partner, which means a walk-in shower installation isn’t a one-off job we’re learning on the fly. It’s a piece of the broader bathroom remodeling in Allen work we do, with the same background-checked, uniformed technicians and the same 730-Day Done Right Promise on every project. From foundation to finish line, one contractor owns the whole thing.
What that means for you in practice:
- Live person, 24/7. Call (888) 343-9048 at 2am on a Sunday and a real person answers. No voicemail, no “we’ll call you back Monday.”
- Upfront pricing, no surprises. The estimate you sign is the number you pay unless a visible scope change gets approved in writing.
- Background-checked, uniformed technicians. You know exactly who’s in your house and what they’re doing there.
- Curated brand partners. From shower valves and trims to tile and glass, we recommend brands we’d put in our own homes. Moen and Delta for valves and trim, American Standard for bases, and a curated tile and glass lineup behind them.
- 730-Day Done Right Promise. Two full years of coverage on workmanship. If it’s not done right, we make it right.
We’ve been in business since 2014 and proudly serve the communities we work in, and Allen is one of them. Reach out on the home page or call us and we’ll get you on the schedule.
FAQs – Walk-In Shower Installation
How much does walk-in shower installation cost in Allen?
Walk-in shower installation in Allen typically costs between $4,200 and $11,500 for a full tear-out and rebuild, with most single-shower projects landing in the $5,500 to $8,500 range. Curbless designs and custom frameless glass push toward the top of the range. Call (888) 343-9048 for an exact quote on your space; estimates are free and there’s no obligation.
Can you remove my tub and replace it with a walk-in shower?
Yes. Tub-to-shower conversions are the single most common walk-in shower project we do in Allen, and they usually finish in 5 to 9 working days once materials are on site. We handle the drain relocation, waterproofing, tile, and glass as one scope so you’re not coordinating separate trades. Call (888) 343-9048 and we’ll take a look at your bathroom and give you a real timeline.
Is a curbless walk-in shower worth the extra cost?
A curbless shower is worth it if anyone in the house has mobility or balance concerns, if you plan to age in place in your Allen home, or if you want the cleanest, most open look in a small bathroom. It typically adds $1,500 to $3,000 over a low-curb design because the floor framing and slope have to be reworked. For most Allen homeowners who aren’t planning for mobility, a low-curb shower with a 2-inch threshold delivers nearly the same look for less. Call (888) 343-9048 and we’ll walk through which one fits your home.
How long does a walk-in shower installation take in Allen?
Most single-shower conversions in Allen are finished in 5 to 9 working days once materials are on site, and a larger bathroom remodel that includes the shower stretches longer. The delay driver is almost always material lead times, not labor; we order everything up front to keep the schedule tight. Call (888) 343-9048 to get a specific timeline for your project.
Do you offer financing for a walk-in shower?
Yes. We offer 0% financing for 18 months and $1,000 off projects over $10,000, which covers most full walk-in shower builds. That makes a $7,000 shower manageable without draining your savings in one hit. Call (888) 343-9048 and we’ll explain how the financing works before you commit to anything.
Is it cheaper to repair my old shower or install a new walk-in?
Repair is cheaper up front, but rarely cheaper over time when the existing shower is 20-plus years old and showing real failure. A $900 patch on a failing fiberglass pan usually buys you 2 to 4 years before you’re back to full replacement, and if water has already gotten behind the surround, patching makes the eventual rebuild more expensive. A walk-in installation built on proper waterproofing should last 25 to 30 years. Call (888) 343-9048 and we’ll give you an honest read on whether repair or replace makes sense for your specific shower.
Schedule Your Free Walk-In Shower Estimate
Your walk-in shower is a 25-plus-year investment, and the difference between one that lasts and one that rots is the work you can’t see. Groundwork Construction Co. of Allen builds them right the first time, backs them with the 730-Day Done Right Promise, and charges an upfront price you approve before we start. Calls are answered by a live person 24/7, and the estimate is free. Call (888) 343-9048 today and let’s talk through your bathroom.
Written by the team at Groundwork Construction Co. of Allen, serving Allen.


