







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in McKinney, TX: What to Expect
Cabinets & countertops in McKinney typically run $14,000 – $45,000 for a full kitchen, or $4,000 – $13,000 for cabinet installation and $2,000 – $6,500 for countertops when those are done as standalone jobs. A straight cabinet-and-counter swap in a sound room takes two to four weeks from demo to final caulk; moving plumbing, electrical or structure pushes it longer. Call (888) 343-9048 and we’ll price your McKinney kitchen with a written line-item quote.
How a Cabinet and Countertop Job Actually Runs in McKinney
Here’s the sequence we follow, with the decisions that land on you at each step. It’s roughly the same on a 1920s bungalow near the downtown square as it is in a 2005 Stonebridge Ranch tract home, though the permitting rhythm and the surprises behind the walls differ a lot.
- Stage 1 – Measure and template (days 1 – 2). We measure the room, check the walls for plumb and the floor for level, and confirm what stays and what goes. You decide door style, finish, and box construction here. On older McKinney homes we’re often scribing to walls that are out of square by an inch or more, so cabinet fillers and end panels get planned now, not improvised later.
- Stage 2 – Demo and prep (days 3 – 5). Old boxes and tops come out, and we open the wall to see what the last remodel left. That’s where a McKinney job can change: a cast-iron drain or knob-and-tube wiring behind a 75069 bungalow cabinet turns a simple swap into a plumbing or electrical line item. We photograph it and put the change in writing before anyone touches it. You decide whether to repair or relocate.
- Stage 3 – Cabinet set (days 6 – 9). Base and wall cabinets go in, shimmed to the floor, shimmed to each other, and screwed to studs. This is where cheap installations show up later as doors that won’t stay closed. You confirm hardware placement and pulls before we drill.
- Stage 4 – Countertop template and install (days 10 – 14). For quartz and granite, the fabricator templates the installed base cabinets, cuts the stone, and sets it. That template-to-install gap is usually five to seven business days depending on the shop’s schedule. You pick edge profile and sink cutout placement at template time. We set Moen or Delta fixtures into the new holes during this stage.
- Stage 5 – Finish and punch (days 15 – 20). Sink, disposal, and faucet connections get pressure-tested, cabinet doors and drawers get adjusted, toe kick gets trimmed, and we walk the room with you. Anything on the punch list we fix before we call it done, backed by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinet and Countertop Options You’ll Choose Between
Most of the money and most of the regret live in these choices. Here’s the honest trade-off on each.
- Stock vs. semi-custom cabinets. Stock boxes in set widths are the cheapest path and work fine in a square room. Semi-custom lets us hit odd widths and ceiling heights, which matters in the 1990s – 2010s tract homes where soffits and angles aren’t standard. KraftMaid sits in that semi-custom range and holds up well to daily kitchen use.
- Cabinet box material. Particleboard boxes with a melamine finish are common and cost less; plywood boxes resist moisture better and screw together tighter. In a hot, humid North Texas summer with the kitchen door open to a running AC, moisture swings are real, so plywood earns its premium.
- Quartz vs. granite vs. laminate. Quartz is uniform, non-porous, and doesn’t need sealing. Granite is natural, varied, and needs periodic sealing. Laminate is the budget option and shows wear faster at the sink edge. Cambria sits in the premium quartz tier; on a mid-range McKinney kitchen, standard quartz from a good fabricator is usually the better value.
- Countertop thickness and edge. 3cm is standard; a mitered edge reads thicker and costs more per linear foot. A simple eased edge keeps the budget lean.
- Sink style. An undermount single-bowl stainless is the practical pick for most families; a Blanco composite or fireclay farmhouse adds character and a little cost, and farmhouse sinks need a cabinet made for them.
What Cabinets & Countertops Costs in McKinney, TX

Expect $14,000 – $45,000 for a full cabinet-and-counter package in McKinney, or $4,000 – $13,000 for cabinets alone and $2,000 – $6,500 for counters alone. Those ranges hold across the city, but five variables decide where in the range your job lands:
- Kitchen size and layout. Linear feet of cabinetry is the single biggest driver. A galley kitchen with 18 linear feet costs far less than an L-shape with a peninsula and 30 feet of cabinets.
- Box grade. Stock, semi-custom, and custom boxes step up in price fast; the difference between stock and semi-custom alone can be $3,000 – $6,000 on a typical McKinney kitchen.
- Existing condition. Out-of-square walls, old plumbing, and hidden water damage all add labor. This is where 75069 historic homes and 2005-era tract homes diverge most.
- Relocating plumbing, electrical or structure. Moving a sink or range is a separate scope with permit and trade costs. Keeping the sink where it is saves real money.
- Countertop material and edge. Laminate to premium quartz is a several-thousand-dollar swing; a mitered edge adds cost per linear foot.
A written estimate from us lists cabinets, counters, labor, demo, haul-away, sink and faucet allowance, and permit fees as separate lines. What it typically does not include: appliance purchases, backsplash tile (that’s its own scope), and any structural change discovered after demo. Nothing moves without a written change order first. Call (888) 343-9048 for an exact quote, and estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat McKinney Homes Specifically Do to This Job
McKinney’s housing stock splits hard, and it changes how we approach cabinets and countertops. In the 75069 historic core around the downtown square, we’re often working in early-1900s Victorian and Craftsman homes where walls are out of plumb, cabinets have to be scribed and shimmed, and any exterior or structural work near the square can hit the locally enforced historic overlay. That overlay can slow an exterior component for months, so we plan cabinet and counter work around it rather than after it. Out in the 75070 and 75071 ZIPs, the stock shifts to 1990s – 2010s tract homes and the active subdivisions around Stonebridge Ranch and Adriatica, where the boxes go in fast but soffits, angles, and prior builder shortcuts demand careful templating. Clay soils across the blackland prairie move with the seasons, and a kitchen floor that’s slightly out of level is something we correct with cabinet shims, not ignore. Contractors regularly shift between code-sensitive historic work and fast-turn tract work in a single ZIP code, and we plan the McKinney schedule around that reality.
Serving McKinney, TX – Our Local Coverage Area
We serve McKinney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in McKinney

Most McKinney cabinet and countertop jobs run two to four weeks from demo to final punch, with the template-to-install gap on stone counters adding five to seven business days. Historic homes in 75069 can run longer if we uncover plumbing or framing issues. Call (888) 343-9048 to get a timeline for your specific kitchen – estimates are free.
Cosmetic cabinet and countertop swaps usually don’t require a permit, but moving plumbing, electrical or walls does, and we pull those permits and schedule the inspections. Part of a full Kitchen Remodeling in McKinney scope often includes permitted work, which is why we scope it in writing up front. Call (888) 343-9048 and we’ll tell you what your job needs.
Yes, and keeping the sink and range where they are is the most budget-friendly path. That said, if the old plumbing behind a McKinney cabinet is at the end of its life, we flag it after demo and give you a written change order before touching it. Call (888) 343-9048 to talk through your layout.
Expect $14,000 – $45,000 for a full package, or $4,000 – $13,000 for cabinets and $2,000 – $6,500 for counters done separately. Size, box grade, existing condition, and material choice move the number. Call (888) 343-9048 for an exact written quote – estimates are free.
Every cabinet and countertop job we do in McKinney is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (888) 343-9048 to schedule your estimate.
Get a Free Cabinets & Countertops Estimate in McKinney
We’ll come out, measure the room, and hand you a written line-item estimate for your McKinney kitchen – $14,000 – $45,000 for a full package, itemized so nothing’s hidden. Calls are answered by a live person, 24/7, and every technician is background-checked and uniformed. If your project is part of a larger scope, see our Kitchen Remodeling service, or pair cabinets with a Garage Conversion ADU in McKinney or a New Detached ADU in McKinney. We serve all of McKinney. Call (888) 343-9048 for your free estimate.
Written by the team at Groundwork Construction Co.












