A Groundwork company - serving Allen, TX
A backyard with a new horizontal privacy fence
Chain Link Fence · Murphy, TX

Chain Link Fence in Murphy - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Allen
A new black aluminum pool fence with a gate
A new wood side gate with black hardware
A new bay window with a cushioned seat
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

A chain link fence in Murphy, TX typically runs between $3,500 and $9,000 for a standard residential lot, with most single-family properties landing in the $4,200 – $6,500 range. The job itself takes one to two days on site after materials arrive, plus a short permitting window with the city. The variables that move the number are linear footage, height, gate count, and whether the soil shifts under your posts. Call (888) 343-9048 for a free on-site estimate and we’ll walk your lot line with you, measure it, and put a written number in your hands the same visit.

Call (888) 343-9048

A new stained cedar privacy fence

Every fence we build in Murphy follows the same five stages. Here’s exactly what happens and when you’ll be asked to make a call.

Stage 1: Site walk and utility locate (before day one)

We meet you on the property, measure the full run, and flag gates, corners, and anything that changes the line: a mature tree, a pool equipment pad, a drainage swale. Before we dig a single post hole, 811 comes out and marks buried utilities. In Murphy, where lots were platted decades ago and service lines don’t always follow the same depth they do in newer subdivisions, this step matters more than homeowners expect. You’ll need to confirm the exact property line at this stage. If you don’t have a recent survey, we’ll talk through what you have and what a licensed surveyor costs before we proceed.

Stage 2: Permit filing and HOA check (3 – 7 business days)

Murphy runs fence permits through a small city permitting office, not a large development services department. That cuts the timeline, but it also means the plan reviewer looks closely at setbacks and easement lines. We file the permit, submit the plot plan, and handle the inspection scheduling. If your subdivision has an HOA with height or style restrictions, that approval runs on a separate track and we’ll tell you upfront which one is the slower path. This is your first decision point: confirm fence height and style before we file, because changing them after the permit issues means a revision and another wait.

Stage 3: Post setting (day one, 4 – 6 hours)

Posts go in first. On North Texas black clay, we set posts in concrete below the frost-free depth and we brace them properly, because this soil expands and contracts through the wet-dry cycle and a loose post will lean within a season. Post spacing is typically 8 to 10 feet on center. Terminal posts at corners and gate openings get larger footings and extra concrete. We check plumb and line as we go, not after everything’s set.

Stage 4: Rails, fabric, and tension (day two, 3 – 5 hours)

Top rail, bottom rail, and tension bars go on, then the chain link fabric unrolls across the run. We stretch it with a fence puller to eliminate sag and tie it off with wire ties on every post. Gate frames get hinges, latches, and a proper drop rod if you’re running double gates. This is your second decision point: confirm whether you want a walk gate, a drive gate, or both, and which hardware grade. The fabric and hardware choices here determine whether the fence feels solid or rattles in the wind. Chain link fences installed with a proper tension system hold firm through North Texas wind events.

Stage 5: Inspection and final walk (same or next business day)

We schedule the city inspection, walk the fence with you, and confirm every gate swings clean and latches without lifting. Anything that needs adjustment gets adjusted before we leave. Then we hand you the written workmanship warranty, which on our jobs is the 730-Day Done Right Promise.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Chain link isn’t one product. Here’s what actually changes the finished fence:

  • Gauge of fabric: 11.5-gauge is standard residential; 9-gauge is heavier and holds its shape better if you have pets or kids who test it. The heavier gauge runs more per linear foot, but it lasts longer and resists denting from lawn equipment.
  • Coating: galvanized vs. vinyl-coated. Galvanized steel is the budget choice and performs fine in North Texas, but vinyl-coated (typically in black or green) hides better against landscaping and won’t telegraph rust the way plain galvanized does over time. If your fence runs along a visible side yard, coated is the upgrade most Murphy homeowners choose.
  • Height: 4-foot is common for property-line marking; 5-foot is the standard residential height for containment; 6-foot adds privacy and is often the limit before HOA approval is required. Confirm your HOA’s cap before you finalize.
  • Gates: A single walk gate is straightforward. A drive gate needs heavier posts, a larger footing, and either a drop rod or caster wheels to carry the span. If you’re considering a gate long-term, tell us now; retrofitting a drive gate onto a walk-gate setup means replacing terminal posts.
  • Top rail and post caps: Standard is fine for most lots, but adding tension wire or a top-rail brace at corners tightens the run on longer spans.
New painted shaker cabinets with an organized deep drawer

Residential chain link fence in Murphy runs $3,500 – $9,000, with the middle of that range covering most standard subdivision lots. Here’s what moves a job from the low end to the high end:

  • Linear footage: A typical Murphyy lot needs 150 – 250 linear feet. Every additional 50 feet adds roughly $600 – $1,100 depending on gauge and height.
  • Gates: A walk gate adds $250 – $500 installed; a drive gate adds $800 – $1,800 depending on width and hardware.
  • Removing an old fence: Tear-out and haul-off of an existing fence runs $300 – $700, more if posts are set in concrete and have to be dug out.
  • Terrain and soil: A flat lot is straightforward. A lot with grade changes, a retaining wall tie-in, or a drainage swale crossing the line adds time and materials.
  • Permit and HOA: Permit fees are modest; if your HOA requires an architectural review, that adds time and possibly a design submittal.

Your written estimate itemizes posts, rails, fabric, gates, hardware, and labor with a firm total. The number you see is the number you pay. We don’t do change orders mid-job unless you ask for something new.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Murphy is a small, essentially built-out Collin County suburb in ZIP 75094, and that shapes this job in ways it doesn’t in the fast-growing exurbs around it. Nearly all residential work here is infill, teardown-rebuild, or renovation on lots platted from the 1980s through the 2000s. There’s very little vacant land, so when a fence line runs between two existing homes, the plat’s setbacks, easements, and drainage patterns dictate where the fence can actually go. A fence that looks fine on paper can cross a drainage easement the city won’t allow you to block. That’s why the plot plan review at permit stage is not a formality in Murphy; it’s the step that catches problems.

The other Murphy-specific factor is the soil. North Texas black clay moves with the region’s wet-dry cycles and summer heat. Posts set in that clay without proper depth and concrete will lean within a couple of seasons. We over-build the footings here on purpose. Hail and high wind also work on fences, so we spec heavier hardware than you’d see on a fence in a calmer climate. And because Murphy’s permitting runs through a tight, small-town inspection environment rather than a big-city development services department, we know what the inspector will look for and we build to it the first time.

Serving Murphy, TX – Our Local Coverage Area

We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

A remodeled hall bathroom with patterned floor tile and painted walls

Call (888) 343-9048 to schedule your free on-site estimate for a chain link fence in Murphy. A live person answers, any hour, any day. We measure your lot, check your plat line and HOA rules, and hand you a written, itemized quote with a firm number. No pressure, no vague bids. If your fence work is part of a larger yard project, our Fence Installation in Murphy page covers the full scope. And if you’re building a detached structure that needs its own utilities and grading, homeowners often pair this with ADU Site Prep & Utilities in Murphy. To see everything we do in Murphy, start there.

Written by the team at Groundwork Construction Co.

Why Murphy Chooses Groundwork Construction Co. of Allen

We set the standard for chain link fence in Murphy.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Murphy

Getting your chain link fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your chain link fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chain link fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Murphy Customers Say

Trusted by homeowners across Murphy and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new multi-panel patio door opening a kitchen to the patioA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining room

More services in Murphy

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Allen

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Allen team

A local vetted partner works across Allen and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Chain Link Fence in Murphy?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Murphy.

(888) 343-9048

Request a Free Estimate in Murphy

Tell us about your chain link fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch