







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Murphy, TX: What to Expect and What It Costs
Door installation in Murphy runs $400 to $1,800 for a standard interior or exterior door swap, and $2,500 to $7,500 for a custom carriage-house or oversized wood entry with new hardware and opener integration. A single interior door is usually a one-day job; a full exterior entry with finish work takes two to four days. Call (888) 343-9048 for a free on-site estimate.
How our door installation process works, stage by stage

Doors are less forgiving than they look. An opening that’s out of square by a quarter inch will show in a door that drags, gaps at the strike side, or won’t latch through the seasons. Murphy’s clay soils move enough that we check the opening before we ever order the slab. Here’s the sequence we follow from call to final walkthrough.
Stage 1 – Estimate and on-site measurement (about 60 – 90 minutes). We measure the rough opening, check plumb and level, look at how the header and jamb are framed, and photograph the existing conditions. This is where you decide the door style, material, and hardware. Most decisions stall here, so we bring finish and material samples to the first visit rather than making you drive to a showroom.
Stage 2 – Ordering and lead time (2 – 6 weeks, depending on door). A stock hollow-core or prehung interior door ships fast. A custom wood entry, a carriage-house garage door, or an imported door with a specialty finish can run four to six weeks. We confirm the lead time in writing before you pay a deposit. You’ll sign off on the door spec, hardware, finish, and hinge side during this stage.
Stage 3 – Demo and prep (half a day to a full day). The old door and, if needed, the jamb come out. We inspect the framing and sheathing for rot, water damage, or termite activity, and we repair the opening before anything new goes in. On exterior doors this is where we flash the threshold and sill correctly, which is where most leaks start.
Stage 4 – Installation and hardware (one to two days). The new door goes in, gets shimmed and plumbed, and is secured through the jamb into framing. We hang the hardware, align the strike plate, and set the closer or opener. On a garage door, the spring and track work happen here under load, so this is a spot for a trained installer rather than a weekend project.
Stage 5 – Finish, seal, and walkthrough (one to two days, often split). Paint or stain, caulk and weatherstripping on exterior doors, and a final alignment check. We walk through operation with you, confirm the latch and lock, and leave you with the warranty paperwork. The whole job from first call to final walkthrough typically sits at three to eight weeks, mostly waiting on the door itself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for your door
Most of the decisions that affect cost and how the door feels in five years happen before anyone touches a tool. Here’s the honest trade-off on each:
- Fiberglass vs. wood entry doors. Fiberglass holds up to North Texas sun and hail without warping or splitting and is usually the better long-term buy on a west-facing entry. Solid wood looks richer and stains beautifully but needs refinishing every few years. Wood runs at the top of the range; fiberglass sits mid-range.
- Prehung vs. slab. A prehung door comes already mounted in its frame, so installation is faster and the fit is more reliable. A slab reuses your existing jamb, which costs less but only works if the old frame is square and sound. On a 1990s Murphy home, the original jamb often isn’t.
- Carriage-house and custom garage doors. Stamped steel is the budget option. Carriage-house styles in wood or composite give you the look of a detached garage on a modern home, and that’s the premium finish most of our Murphy clients ask about. Composite holds its color better than wood in the heat.
- Smart-home-integrated openers. A wi-fi-connected opener with battery backup is the standard now, and quiet belt-drive units are worth the extra on attached garages where you’ll hear it from the bedroom above.
- Hardware and finish. Satin nickel, matte black, oil-rubbed bronze. A good lockset and hinges add $150 – $600 and matter more to how the door feels daily than the door itself. Grease and finish quality separate a door that works smoothly for years from one that starts sticking.
What Door Installation costs in Murphy, TX

Expect $400 to $1,800 for a standard interior or exterior door replacement, and $2,500 to $7,500 for a custom entry, carriage-house garage door, or oversized wood door with new hardware and opener integration. Every written estimate is itemized line by line, so you know what you’re paying for before any work starts.
Five things push the number up or down:
- Door type and grade. A stock hollow-core interior door is the low end; a solid wood or custom-composite entry is the high end.
- Opening condition. A square, sound jamb keeps costs contained. Rotted framing or an out-of-square opening adds repair time.
- Size and style. Oversized, arched, or custom-width doors cost more in material and install labor.
- Hardware and integration. Smart openers, premium locksets, and integrated entry systems add cost but last longer.
- Permit scope. A straight swap usually doesn’t need a permit. Structural changes to the opening or an added exterior door often do.
What’s included in a written estimate: removal of the old door, prep and repair of the opening, the new door, hardware, installation, and cleanup. What’s often not included and should be asked about: painting or staining beyond a basic coat, structural framing repair, and any code-required work triggered by a moved opening. The number you see is the number you pay, with no change orders.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy homes specifically do to this job
Murphy is a small, essentially built-out Collin County suburb, and that shapes door work here in ways that don’t apply to the fast-growing exurbs around it. Most homes sit on lots platted from the 1980s through the 2000s, and with little vacant land left, construction skews toward infill, teardown-rebuild, and renovation. That means tight lots, established setbacks, and HOA and plat restrictions that govern what you can change on the exterior. A new front door is rarely just a door swap in 75094 if the opening, trim, or finish is being altered on a street where the plat holds specific rules.
Nearly all residential permitting runs through a small-town inspection environment rather than a big-city development services department, so turnaround is quick, but the requirements are specific. An exterior door change on a street in the established subdivisions usually warrants a call to confirm whether a permit applies before we order. And because soils here are the classic North Texas black clay, we see door openings rack and settle over wet-dry cycles, which is why we check plumb before we order and again on install day. The doors that fail early are almost always the ones installed into a moving opening without correcting it first.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Door Installation in Murphy

A standard interior or exterior door is a one-to-two-day job, and a custom entry or garage door with hardware and finish work takes two to four days of on-site labor. Total time from order to walkthrough runs three to eight weeks, with most of it waiting on the door itself. We confirm lead times in writing so you know the schedule up front. Call (888) 343-9048 for an exact timeline on your door.
A straight like-for-like swap usually doesn’t require a permit, but a new exterior opening or a structural change to the opening often does. Murphy’s permitting runs through a small-town inspection department, so we confirm the requirement before any work starts. We pull the permit and pass the inspection when one applies.
Yes, in most cases a door can be replaced within the existing opening without touching plumbing or framing. If the current jamb is rotted or the opening is out of square, we repair the framing first. We’ll tell you clearly what’s a repair and what’s a structural change, so nothing surprises you mid-job. Call (888) 343-9048 if you want an honest read on your opening.
Standard interior and exterior door replacements run $400 to $1,800, and custom entry, carriage-house, or smart-integrated doors run $2,500 to $7,500. The swing comes from door grade, opening condition, size, hardware, and permit scope. Every estimate is itemized line by line. Call (888) 343-9048 for an exact quote, and the estimate is free.
Every door we install is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer warranties on the door and hardware also apply, and we hand you that paperwork at the walkthrough. If a door drags or a lock won’t catch within the promise window, we come back. Call (888) 343-9048 to schedule your free estimate.
Get a free estimate for door installation in Murphy
Whether you’re replacing a single entry or outfitting a custom rebuild with carriage-house garage doors and quiet openers, we’ll measure the opening, show you the door and hardware options, and give you a written line-item price with no change orders. Call (888) 343-9048 for a free on-site estimate. You’ll reach a live person any hour of the day, and we can often walk you through a starting range on the first call.
Written by the team at Groundwork Construction Co.












