







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Sachse, TX: What the Job Actually Involves
A chain link fence in Sachse, TX typically runs $3,500 to $9,000 for a standard residential lot, installed in two to four days depending on footage, gates, and terrain. The work is straightforward: set posts, stretch fabric, hang gates, tension everything. What makes Sachse jobs different is the property itself – acreage lots, detached workshops, and pasture-line boundaries that call for heavier posts and tighter tensioning than a builder-grade subdivision fence. Call (888) 343-9048 for a free on-site estimate.
How We Build a Chain Link Fence, Start to Finish

This is not a job where we show up, unroll wire, and leave. On acreage and workshop properties especially, the sequencing matters. Here’s the real order of operations.
Day 1: Walk, string, and call in locates
The first visit is a measured walk of the fence line with you. We confirm corners, gate positions, and where the fence meets an existing structure or a neighboring property line. Before anyone digs, we call in utility locates through Texas 811 – that’s a legal requirement and it takes a few business days to clear on a property with septic or buried service. You decide gate placement and swing direction during this walk.
Day 1 – 2: Layout and post setting
Posts get set in concrete at the correct depth and spacing – typically 8-foot or 10-foot on center for standard residential, tighter for high-wind or heavy-duty line. Corner, end, and gate posts get extra concrete because they carry the tension of the whole run. On Sachse lots abutting open pasture, we often upsize to heavier-gauge posts at the boundary so the fence doesn’t lean after a few storm seasons. Posts cure before the next stage.
Day 2 – 3: Top rail, tension wire, and fabric
Once posts are set, we run top rail through the line posts, then pull the fabric and tension it with a stretcher bar. This is the stage that determines whether the fence looks sharp for fifteen years or sags by year three. Bottom tension wire gets added on any run where dogs, livestock, or digging animals are a concern. You’ll want to decide here whether you want a bottom rail for longevity.
Day 3 – 4: Gates, hardware, and final walk
Gates hang last, after the fence is tensioned, so the frame is square to a stabilized run. We set the hinges, latch, and any operator arm or self-closer you’ve chosen. Then we walk the line with you – every post, every tie, every gate swing. If a gate drags or a corner looks off, we fix it before we pack up.
Closeout
We clean up the site, haul off fabric scraps and empty concrete bags, and hand you the written details of your 730-Day Done Right Promise. If anything goes wrong with the workmanship inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Choose Between
Chain link is not one product. The choices below are what actually change the price and the lifespan of a chain link fence in Sachse.
- Gauge. Standard residential fabric runs 11.5 gauge; heavier-duty 9 gauge lasts noticeably longer and stands up to dogs and acreage wind. On a workshop or equipment enclosure, 9 gauge is worth the upcharge.
- Post type. Line posts are typically 2-inch; heavier wall thickness and larger diameter at corners and gates. Galvanized holds up in North Texas; powder-coated finishes in black, green, or brown add cost and cut the “industrial” look.
- Height. 4-foot is the common residential height. 5 and 6-foot are common where the fence protects a workshop, garden, or equipment. Taller means heavier posts and more concrete.
- Fabric weave. Standard 2-inch mesh is the norm; tighter weave (1-3/4 inch or 1-1/2 inch) costs more but keeps small dogs in and adds a bit of privacy screen support.
- Gates. Walk gates versus drive gates, single versus double swing, and whether the gate needs an operator arm. A 4-foot walk gate and a 12-foot double drive gate are very different builds.
- Add-ons. Privacy slats, windscreen, top rail upgrade to bottom rail, and tension wire all add cost but change how the fence performs over the years.
What a Chain Link Fence Costs in Sachse, TX

The realistic range for a residential chain link fence in Sachse is $3,500 to $9,000, and that spread reflects real variables, not sales pressure. A standard 150 to 200-foot residential run with one walk gate lands near the lower end. A workshop enclosure, a multi-gate perimeter, or a long pasture-line run pushes toward the upper end.
The variables that move the number:
- Linear footage. The single biggest driver. Every additional 50 feet of fence adds measurable material and labor.
- Terrain and clearing. A flat, cleared suburban lot sets faster than an acreage lot with brush, a slope, or a tree line to work around.
- Gate count and size. Each gate adds hardware, heavier posts, and install time. Drive gates cost more than walk gates.
- Material grade. 9 gauge over 11.5 gauge, heavier posts, powder-coat finishes – each upgrade moves the number.
- Locates and permits. Utility locates are standard, but flagged lines or a property survey matter on acreage lots where the line meets a pasture edge.
Your written estimate itemizes posts, fabric, gates, hardware, concrete, and any add-ons. It also states what’s not included – often a survey if one is required, or fence removal if the old fence is still standing. Our pricing is upfront, and the number you see is the number you pay. Call (888) 343-9048 for a line-item quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse Properties Specifically Do to This Job
Sachse is a small, rapidly built-out suburb on the Dallas – Northeast corridor at the Collin – Dallas county line (ZIP 75048), and most of its housing stock went up in the 1990s through the 2010s. That matters for fence work because the properties here are not the aging farm-and-lake structures the town’s history might suggest. What we work on most is newer homes where the builder-grade fence is due for replacement, plus acreage lots where a homeowner is finally fencing in a workshop, a garden, or a pasture line. Because Sachse was essentially a rural crossroads that mushroomed, we routinely work lots that sit next to undeveloped pasture or a remaining 1970s ranch – so within a few blocks you’ll find fresh subdivision lines and legacy well-and-septic-era properties, and the fencing approach differs.
The expansive blackland-prairie clay under these lots is the other factor. It cycles with drought and heavy spring storms, and it moves posts if the concrete is undersized or the spacing is wrong. On a property where the fence line meets open field or a neighboring county-jurisdiction parcel, we also have to resolve the boundary before we dig – that’s a conversation best had on-site, and it’s why we walk the line with you rather than quote over the phone. If your project is part of a full Fence Installation in Sachse plan that includes a patio, pergola, or grading, we coordinate the trades so nothing gets torn up twice. Many acreage owners pair this with ADU Site Prep & Utilities in Sachse when they’re building out a workshop or outbuilding, and Door Installation in Sachse for the shop doors that come with it. We cover every corner of Sachse, and our Fence Installation service is the parent scope if your job goes beyond a chain link line.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Sachse

Most residential chain link fence jobs in Sachse wrap in two to four days on-site, split around the concrete cure time. Larger acreage runs, multi-gate installs, and properties with locates on legacy septic can extend that to about a week. Call (888) 343-9048 and we’ll give you a realistic schedule for your lot.
It depends on height, location, and whether the property sits at the county line. Sachse residential fencing commonly falls within local limits, but taller fences, corner-lot sight lines, and acreage boundary fencing can require permitting or a plat check. We review that on the walk-through and tell you what applies before any work starts.
No, not on a job we scoped properly and quoted in writing. Our pricing is upfront – the number you see is the number you pay. The only additions that ever appear on a Sachse fence invoice are items you approve in advance, like adding a gate or upgrading to 9 gauge after the walk. Call (888) 343-9048 for a written quote.
Yes, in nearly every case. Chain link is a surface-set fence – posts go in the ground with concrete, not into the slab, so plumbing, electrical, and the building structure stay untouched. We still call in utility locates before digging, because hitting a septic line or buried service on an acreage lot is the one thing that turns a simple fence into a repair job.
Every chain link fence we install is covered by our 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space. If something needs correcting inside that window, we come back and make it right. Call (888) 343-9048 to talk through your project.
Get a Free Chain Link Fence Estimate in Sachse
Whether you’re fencing in a workshop behind the house, running a clean boundary along a pasture edge, or replacing a builder-grade fence that’s had it, we’ll walk the line with you and put a real number on paper. The call is answered by a live person, 24/7. Dial (888) 343-9048 and we’ll set up a free on-site estimate for your chain link fence in Sachse.
Written by the team at Groundwork Construction Co.












