







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Murphy, TX: What It Costs and What It Takes
A chain link fence in Murphy, TX typically runs between $3,500 and $9,000 for a standard residential lot, with most single-family properties landing in the $4,200 – $6,500 range. The job itself takes one to two days on site after materials arrive, plus a short permitting window with the city. The variables that move the number are linear footage, height, gate count, and whether the soil shifts under your posts. Call (888) 343-9048 for a free on-site estimate and we’ll walk your lot line with you, measure it, and put a written number in your hands the same visit.
How We Build a Chain Link Fence: Day One, Day Two, and the Decision Points

Every fence we build in Murphy follows the same five stages. Here’s exactly what happens and when you’ll be asked to make a call.
Stage 1: Site walk and utility locate (before day one)
We meet you on the property, measure the full run, and flag gates, corners, and anything that changes the line: a mature tree, a pool equipment pad, a drainage swale. Before we dig a single post hole, 811 comes out and marks buried utilities. In Murphy, where lots were platted decades ago and service lines don’t always follow the same depth they do in newer subdivisions, this step matters more than homeowners expect. You’ll need to confirm the exact property line at this stage. If you don’t have a recent survey, we’ll talk through what you have and what a licensed surveyor costs before we proceed.
Stage 2: Permit filing and HOA check (3 – 7 business days)
Murphy runs fence permits through a small city permitting office, not a large development services department. That cuts the timeline, but it also means the plan reviewer looks closely at setbacks and easement lines. We file the permit, submit the plot plan, and handle the inspection scheduling. If your subdivision has an HOA with height or style restrictions, that approval runs on a separate track and we’ll tell you upfront which one is the slower path. This is your first decision point: confirm fence height and style before we file, because changing them after the permit issues means a revision and another wait.
Stage 3: Post setting (day one, 4 – 6 hours)
Posts go in first. On North Texas black clay, we set posts in concrete below the frost-free depth and we brace them properly, because this soil expands and contracts through the wet-dry cycle and a loose post will lean within a season. Post spacing is typically 8 to 10 feet on center. Terminal posts at corners and gate openings get larger footings and extra concrete. We check plumb and line as we go, not after everything’s set.
Stage 4: Rails, fabric, and tension (day two, 3 – 5 hours)
Top rail, bottom rail, and tension bars go on, then the chain link fabric unrolls across the run. We stretch it with a fence puller to eliminate sag and tie it off with wire ties on every post. Gate frames get hinges, latches, and a proper drop rod if you’re running double gates. This is your second decision point: confirm whether you want a walk gate, a drive gate, or both, and which hardware grade. The fabric and hardware choices here determine whether the fence feels solid or rattles in the wind. Chain link fences installed with a proper tension system hold firm through North Texas wind events.
Stage 5: Inspection and final walk (same or next business day)
We schedule the city inspection, walk the fence with you, and confirm every gate swings clean and latches without lifting. Anything that needs adjustment gets adjusted before we leave. Then we hand you the written workmanship warranty, which on our jobs is the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Chain Link Fence
Chain link isn’t one product. Here’s what actually changes the finished fence:
- Gauge of fabric: 11.5-gauge is standard residential; 9-gauge is heavier and holds its shape better if you have pets or kids who test it. The heavier gauge runs more per linear foot, but it lasts longer and resists denting from lawn equipment.
- Coating: galvanized vs. vinyl-coated. Galvanized steel is the budget choice and performs fine in North Texas, but vinyl-coated (typically in black or green) hides better against landscaping and won’t telegraph rust the way plain galvanized does over time. If your fence runs along a visible side yard, coated is the upgrade most Murphy homeowners choose.
- Height: 4-foot is common for property-line marking; 5-foot is the standard residential height for containment; 6-foot adds privacy and is often the limit before HOA approval is required. Confirm your HOA’s cap before you finalize.
- Gates: A single walk gate is straightforward. A drive gate needs heavier posts, a larger footing, and either a drop rod or caster wheels to carry the span. If you’re considering a gate long-term, tell us now; retrofitting a drive gate onto a walk-gate setup means replacing terminal posts.
- Top rail and post caps: Standard is fine for most lots, but adding tension wire or a top-rail brace at corners tightens the run on longer spans.
What a Chain Link Fence Costs in Murphy, TX

Residential chain link fence in Murphy runs $3,500 – $9,000, with the middle of that range covering most standard subdivision lots. Here’s what moves a job from the low end to the high end:
- Linear footage: A typical Murphyy lot needs 150 – 250 linear feet. Every additional 50 feet adds roughly $600 – $1,100 depending on gauge and height.
- Gates: A walk gate adds $250 – $500 installed; a drive gate adds $800 – $1,800 depending on width and hardware.
- Removing an old fence: Tear-out and haul-off of an existing fence runs $300 – $700, more if posts are set in concrete and have to be dug out.
- Terrain and soil: A flat lot is straightforward. A lot with grade changes, a retaining wall tie-in, or a drainage swale crossing the line adds time and materials.
- Permit and HOA: Permit fees are modest; if your HOA requires an architectural review, that adds time and possibly a design submittal.
Your written estimate itemizes posts, rails, fabric, gates, hardware, and labor with a firm total. The number you see is the number you pay. We don’t do change orders mid-job unless you ask for something new.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy Homes Specifically Do to a Chain Link Fence Job
Murphy is a small, essentially built-out Collin County suburb in ZIP 75094, and that shapes this job in ways it doesn’t in the fast-growing exurbs around it. Nearly all residential work here is infill, teardown-rebuild, or renovation on lots platted from the 1980s through the 2000s. There’s very little vacant land, so when a fence line runs between two existing homes, the plat’s setbacks, easements, and drainage patterns dictate where the fence can actually go. A fence that looks fine on paper can cross a drainage easement the city won’t allow you to block. That’s why the plot plan review at permit stage is not a formality in Murphy; it’s the step that catches problems.
The other Murphy-specific factor is the soil. North Texas black clay moves with the region’s wet-dry cycles and summer heat. Posts set in that clay without proper depth and concrete will lean within a couple of seasons. We over-build the footings here on purpose. Hail and high wind also work on fences, so we spec heavier hardware than you’d see on a fence in a calmer climate. And because Murphy’s permitting runs through a tight, small-town inspection environment rather than a big-city development services department, we know what the inspector will look for and we build to it the first time.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Murphy

One to two days on site for a standard residential lot, plus three to seven business days for the Murphy permit to issue. Add HOA review time if your subdivision requires it. Call (888) 343-9048 for a firm timeline on your lot.
Yes, in most cases. Murphy requires a fence permit with a submitted plot plan, and the review checks setbacks and easement lines. We file it for you and schedule the inspection. Call (888) 343-9048 and we’ll tell you exactly what your lot needs.
Most jobs land between $3,500 and $9,000, with the typical single-family lot in the $4,200 – $6,500 range. Linear footage, height, gates, and tear-out of an old fence are the main variables. Call (888) 343-9048 for an exact quote, and the estimate is free.
Some subdivisions allow it and some don’t, and height caps vary by plat. We check your HOA’s architectural rules before we file anything, so you don’t pay for a permit on a fence the HOA will reject. Call (888) 343-9048 and we’ll review your subdivision’s rules with you.
Our work is covered by the 730-Day Done Right Promise: if something isn’t done right, we come back and make it right. Material warranties vary by manufacturer. Call (888) 343-9048 to go over the details for your specific fence.
We can match gauge, height, and coating on a shared-line run, but we’ll flag exactly where your plat line sits so there’s no dispute. Call (888) 343-9048 and we’ll walk the line with you and your neighbor’s fence in view.
Get a Free Chain Link Fence Estimate in Murphy
Call (888) 343-9048 to schedule your free on-site estimate for a chain link fence in Murphy. A live person answers, any hour, any day. We measure your lot, check your plat line and HOA rules, and hand you a written, itemized quote with a firm number. No pressure, no vague bids. If your fence work is part of a larger yard project, our Fence Installation in Murphy page covers the full scope. And if you’re building a detached structure that needs its own utilities and grading, homeowners often pair this with ADU Site Prep & Utilities in Murphy. To see everything we do in Murphy, start there.
Written by the team at Groundwork Construction Co.












