







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Refacing Kitchen Cabinets Costs in Allen, TX (And Why Your Quote May Move)
Refacing kitchen cabinets in Allen typically runs $6,500 to $11,000 for a standard 20- to 25-door kitchen, and that number can land anywhere inside our broader kitchen project range of $14,000-$45,000 once you fold in countertops, backsplash, or a layout change. Call (888) 343-9048 and we’ll give you an upfront number, not a range that grows after the deposit clears. What almost no online calculator tells you is that in Allen’s 1990s builder-grade stock, the box itself is the wild card, and it’s the single biggest reason a refacing estimate goes sideways here.

Why Allen Kitchens Cost More to Reface Than a Calculator Predicts
Most of Allen was built out in one 1990s-2000s push, which means the kitchen you’re looking at today was framed out roughly 25 years ago with staple-and-glue particleboard boxes. They were never meant to hold a second face. When we open one up to quote a reface, roughly 30% of the jobs we see locally show delamination or water damage at the sink base before a single new door goes on. That’s not a sales line. It’s a pattern across Watters Crossing and Twin Creeks kitchens that sat under the original dishwasher for two decades.
On top of the box, North Texas does its part. The blackland-clay soil shifting under Allen foundations opens hairline gaps at the toe kick, and the humidity swings between a wet spring and a 105-degree July work the particleboard the same way a wet sponge works a cracker. Generic refacing articles written for a dry climate miss all of this.
Where the money actually goes
A refacing quote has three real components: door and drawer fronts, new veneer on the exposed box sides, and hardware. That’s it. The rest of the number, in Allen, is substrate repair.
| Line item | Typical Allen cost |
|---|---|
| Door and drawer fronts (standard 20-25 door kitchen) | $3,200 - $6,500 |
| Veneer on exposed box sides and end panels | $1,200 - $2,400 |
| Hardware (hinges, pulls, soft-close) | $400 - $900 |
| Substrate repair for delaminated or water-damaged boxes | $400 - $900 |
| New countertop, if bundled | $2,000 - $6,500 |
| New backsplash, if bundled | $800 - $2,500 |
Notice the substrate line. That $400-$900 is the number most estimates ignore, and it’s the one that shows up in Allen more often than anywhere else we work. If your quote doesn’t have a line for it, either the contractor hasn’t looked behind the doors yet, or they’re planning to surprise you later.
What to Look For Before You Commit to a Reface
Here’s the honest way to think about it. Refacing is a value play: you keep a structurally sound box, replace the face, and get a new-kitchen look for a fraction of a full remodel. But the whole thing rests on that box. So the question you should be asking any contractor isn’t “how much per door” – it’s “what happens if the frame underneath is soft?”
- Ask for a box inspection before pricing. Any reputable crew pulls a couple of doors and probes the sink base and dishwasher surround. If they quote from a photo, walk.
- Insist on real veneer, not peel-and-stick film. Heat and humidity separate the cheap stuff within a year in Allen summers.
- Get the hardware spec in writing. Hinge quality decides whether your doors still line up in year five.
- Confirm who handles substrate repair and at what price. A flat rate beats an open-ended “we’ll see.”
- Check the warranty. Most refacing-only shops hand you a one-year line on a work order. Ours is a 730-Day Done Right Promise – if veneer peels or a door drifts out of alignment within two years, we make it right at no charge.

KraftMaid Versus Commodity MDF: The Comparison Most Articles Skip
Here’s where Allen homeowners get real choice, and where we’ll be direct. A commodity MDF refacing package is the cheapest way to change the look of a kitchen. It’s also the one that struggles most with our humidity cycles, because MDF swells at the edges when moisture finds a seam. KraftMaid door fronts, which we stock as a partner brand, carry a higher price point and a different overlay than commodity MDF – tighter reveals, better moisture resistance at the edges, and a finish that holds through the swing from muggy May to bone-dry August.
Neither is wrong. But the price gap between them is mostly about how long the face survives North Texas weather, and that’s a conversation a calculator can’t have with you. If your reface is part of a larger project, we can also fold in Cambria surfaces so the whole kitchen reads as one piece instead of a face lifted onto old counters.
How Do You Know If Refacing or Replacement Is the Right Call?
The rule we use on job sites: if box damage or delamination exceeds about 20% of the cabinet run, the math tips toward full replacement, because you’ll spend the savings chasing repairs that never fully stop. Below that threshold, refacing is almost always the better value. Here’s a self-check you can run before you call:
- Open two base cabinets and press hard on the bottom panel. Soft, spongy, or crumbly edges mean damage.
- Look under the sink base. Staining, swelling, or a musty smell points to past leaks.
- Check whether doors still sit flush. Sagging can mean the frame is warping, not just the hinges.
- Run a fingernail along the visible box edge. If the veneer chips away in flakes, that panel needs replacement.
- Count the number of boxes that fail. If it’s more than one in five, ask for a replacement quote too.
If more than a fifth of your run is compromised, replacement is the honest call and we’ll tell you so instead of selling you a reface that fails in year three. When you’re ready to compare full scope, our Kitchen Remodeling in Allen page lays out the whole-project ranges, and a full Kitchen Remodeling build is on the table whenever the boxes don’t hold.
Allen HOAs, the ARC, and Why Cabinet Delivery Dates Slip
Interior refacing doesn’t trigger an architectural review, so you’re clear on approval for the cabinets themselves. But Allen’s HOA subdivisions are strict in ways crews from nearby towns routinely underestimate, and that catches homeowners who reface as part of a larger project. If your reface touches anything exterior-visible – a window swapped near the sink, an exterior door, a vent hood that changes the roofline – the ARC process kicks in before the city permit issues. Cabinet delivery gets scheduled against that timeline, and a stalled approval can push your install back weeks. Build the review timeline into the plan up front and you avoid it. Skip it and you’re waiting on a committee while your doors sit in a warehouse.
FAQs
Refacing in Allen typically runs $6,500 to $11,000 for a standard kitchen, and it climbs toward the $14,000-$45,000 kitchen project range when you add counters, backsplash, or substrate repair. The variables are door count, veneer square footage, and how much box damage turns up. Call (888) 343-9048 for an exact quote – estimates are free and upfront.
Refacing is cheaper when the box is sound, but if more than about 20% of your cabinet run shows delamination or water damage, replacement usually wins on total cost. Run the five-point self-check above, then get both numbers so you can compare honestly. We’ll quote both at (888) 343-9048 – no-hassle pricing, the number you see is the number you pay.
Most refacing jobs are completed in a few visits rather than one, because the box prep, veneer cure, and door hang each need their own window – and rushing the veneer is exactly how it peels in a North Texas summer. Your technician will give you a firm schedule before the first door comes off. Call (888) 343-9048 to lock in a date.
Every Groundwork refacing project is covered by the 730-Day Done Right Promise – if veneer peels or a door drifts out of alignment within two years, we correct it at no charge. That’s backed in writing, which is more than most refacing-only specialists offer. Estimates are free, so call (888) 343-9048 and we’ll walk you through exactly what’s covered.
Ready to stop guessing what your Allen kitchen actually needs? Call (888) 343-9048 for a free estimate and design consult – a live person answers around the clock, technicians arrive background-checked and in uniform, and we’ll tell you straight whether your boxes hold a new face or point toward a full build. From foundation to finish line, we put the plan in writing before the first door comes off.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












