







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in Allen, TX: The Three-Measurement Method That Actually Works
You measure a replacement window by taking three separate numbers in a fixed order: the glass-to-glass size (visible glass only), the frame-to-frame size (what you see from inside the room), and the rough opening (the framed hole the window sits inside). The rough opening is the number that governs the product order, not the glass or the frame. In Allen’s brick-veneer subdivisions, getting this wrong by even a quarter inch means a return trip, added masonry work, and a custom trim bill. Call (888) 343-9048 and we’ll walk you through what your specific window needs before you order anything.

Why Allen Windows Are Trickier to Measure Than They Look
Most of Allen was built out in a single 1990s-to-2010s wave, so nearly every house here has the same exterior makeup: brick-veneer walls with original aluminum-frame windows set inside brick returns. That construction detail changes the measurement task completely.
A wood-framed or stucco house lets you pull a window and work with a clean opening. A brick-veneer home in Twin Creeks or Watters Crossing doesn’t give you that luxury. The brick return wraps the frame, the original aluminum sliders or single-hungs were shimmed at the factory by crews working fast, and the rough opening is now fixed by masonry you can’t easily move. Measure wrong, and the replacement unit either won’t seat or leaves a gap that needs new trim and a masonry patch to close.
This is why we tell Allen homeowners to stop thinking about “the window size” and start thinking about three sizes taken in sequence. Each one tells you something different, and only one of them belongs on the order form.
The Three Measurements, and Which One You Actually Order From
1. Glass-to-glass
Measure the visible glass only, height and width, at the narrowest point. This number is useful for matching style and confirming you’re replacing like-for-like. It does not go on the order.
2. Frame-to-frame
Measure from the inside face of the frame to the inside face of the frame, horizontally and vertically. This is the number most homeowners assume is the “real” size. It isn’t the one that governs the product order for a full-frame replacement, but it’s essential for insert-style replacements and for confirming the interior trim will cover the new unit.
3. Rough opening
This is the framed hole behind the brick return, and this is the governing dimension. Measure width and height inside the framing, then subtract the manufacturer’s stated allowance (usually 1/4″ to 1/2″ total for shimming and squaring) to arrive at the actual unit size. If you order from the frame-to-frame number on a brick-veneer home, you’ll come up short every time.
- Wrong measurement: interior drywall opening. That’s trim territory, not framing.
- Right measurement: rough framing opening, then subtract the manufacturer allowance.
- Sequence matters: glass, then frame, then rough opening. Skipping to the last one without confirming the first two gets you a unit that fits the hole but not the design.

The Measurement Mistake We Fix in Allen Most Often
The single most common error is measuring the interior drywall opening and ordering from that. It looks reasonable. It’s wrong. The drywall opening is usually a half inch to an inch wider than the rough framing, so a unit ordered from it fits the hole but leaves a visible gap at the jambs. You end up paying for additional trim work and a fresh paint line you didn’t budget for.
There’s a second issue specific to Allen’s older stock. In 1990s homes, the original aluminum frames were shimmed inconsistently at the factory, which means if you take a width measurement at the top, middle, and bottom of the same window, you’ll often find a variance of 1/4″ or more. Measure once and you’ll get a number. Measure at three points and you’ll get a range. Order from the range, not the single number.
When we do a pre-measure visit through our Windows & Doors service, we check all three points on every window and note any out-of-square conditions. Blackland-clay soil across Collin County shifts seasonally, and windows set in 1990s slab-on-grade homes often show it. A window that reads square in October can read 3/8″ out in August. Custom sizing handles that. Stock sizing doesn’t.
What a Professional Pre-Measure Catches That You Won’t
Out-of-square openings are the big one. When a slab has moved, the rough opening goes with it, and a stock-sized unit will either bind or leave daylight at one corner. We measure diagonals on every opening to confirm square. If they don’t match within 1/8″, the window is a custom-size candidate.
Here’s the part most homeowners don’t expect: custom sizing on Andersen and Marvin doesn’t carry the cost premium people assume. Both brands build to a wide range of non-standard dimensions without the “custom” upcharge of older-generation manufacturers. That closes the gap between what fits and what’s affordable in a way it didn’t ten years ago.
While we’re at the window, we also catch things that affect the order: failed sealant at the brick return, water staining on the interior sill, and any signs the original flashing has failed. New windows set on old flashing is a leak waiting to happen.
What Window Replacement Runs in Allen
Pricing in Allen realistically lands in these ranges. These are the numbers we quote, not teaser rates.
| Service | Typical Allen Range |
|---|---|
| Window replacement (standard) | $4,500-$15,000 |
| Impact window installation | $8,000-$25,000 |
Impact windows carry a premium because of the glass and frame construction, but they’re worth considering in hailstorm country. Groundwork Construction Co. of Allen also offers $1,000 off projects over $10,000 and 0% financing for 18 months, which moves a full-house replacement into reach for most budgets. The 730-Day Done Right Promise covers every install: if it’s not done right, we make it right.
If you’re weighing a window project against other repairs, our Allen service area page covers how we handle the local permitting and architectural-review requirements that HOAs in Bethany Ridge and similar subdivisions attach before work starts. Most crews from out of town skip that step. We don’t.
When to Call a Pro Instead of Measuring Yourself
If your home is brick-veneer and the original frames are aluminum, get a professional measure. The cost of one wrong order is more than the measure visit. If you’re in a newer stucco or wood-framed home and you’re confident in your numbers, self-measuring is workable. If the window shows any signs of being out of square – visible gaps at the trim, a sash that binds seasonally, or a diagonal mismatch of more than 1/8″ – call. We’ll catch it before it becomes a custom-order surprise.
FAQs
You measure the rough opening inside the framing, then subtract the manufacturer’s allowance for shimming (usually 1/4″ to 1/2″). The glass-to-glass and frame-to-frame measurements come first and confirm the style, but the rough opening governs the order. In Allen’s brick-veneer homes, the brick return makes the rough opening the only reliable number.
When width readings at the top, middle, and bottom differ (which is common in 1990s Allen homes with inconsistently shimmed aluminum frames), order to the smallest reading and let the shim gap absorb the difference. If the variance is over 1/4″, the opening likely needs a custom-size unit. Andersen and Marvin both build to non-standard dimensions. Call (888) 343-9048 and we’ll help you sort that out before you commit to an order.
Self-measuring is free and fine for a rough estimate, but if you get it wrong on a brick-veneer home, the fix costs more than the pre-measure visit. A professional measure typically pays for itself the first time it prevents a custom-order mistake or a masonry patch. Our estimates are free.
Yes. Groundwork Construction Co. of Allen offers free project estimates and design consults, and our technicians measure every opening on site. We serve the whole Allen area, from Watters Crossing to Twin Creeks. Call (888) 343-9048 to schedule. Live person, 24/7 – no voicemail.
Get It Measured Right the First Time
If you’d rather have it looked at than risk ordering the wrong size, Groundwork Construction Co. of Allen offers a no-pressure assessment in Allen – call (888) 343-9048. We measure every opening, check for out-of-square conditions, and quote upfront pricing with no surprises. Most jobs are completed in a single visit, and every install is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.


