







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Anna, TX: What the Job Actually Involves
Door Installation in Anna, TX typically runs $650 to $2,800 per door for exterior or entry replacements, with interior doors at the lower end and impact-rated or custom entry systems at the top. Most single-door replacements are done in one day; a whole-house swap or a project with framing changes runs three to five days. Call (888) 343-9048 and we’ll walk your home, measure every opening, and give you a written line-item price before anyone touches a hinge.
The doors in Anna fail for a reason most homeowners don’t expect: wind load and clay movement working on the same frame. Get the installation right and the door outlasts the storm. Get it wrong and you’re replacing it again in four years.
How We Run a Door Installation, Start to Finish

Every door job follows the same five stages. Here’s what happens, when, and what you decide at each point.
Stage 1: Measure and Scope (Day 1, about 90 minutes)
We measure the rough opening, check the frame for plumb and square, and photograph the threshold and jambs. On Anna slab homes, we also check for settling at the opening – a door that sticks only in summer is telling you something about the foundation, not the door. You decide door style, material, and whether we’re keeping or replacing the frame. The written quote goes out within two business days, itemized line by line.
Stage 2: Order and Lead Time (2 to 6 weeks, depending on spec)
Stock steel and fiberglass entry doors land in about two weeks. Custom sizes, impact-rated units, and specific finishes take four to six. You’ll know your exact delivery window before we schedule anything. We don’t order until you approve the quote in writing.
Stage 3: Demo and Prep (Day 2 of the install, 2 to 3 hours)
Old door and trim come out. We inspect the rough opening for rot, water damage, or framing that’s out of square – this is where surprises live, and where we stop and show you before doing anything else. New flashing goes in at the threshold and head. On exterior doors, we seal the sill pan properly. That one step is what keeps blackland clay from wicking moisture into your framing.
Stage 4: Set, Shim, and Seal (3 to 5 hours)
The unit gets set plumb, shimmed at the hinge and strike side, and checked for square swing before we fasten anything. We use construction adhesive and mechanical fasteners rated for the frame material. Exterior doors get foam insulation at the perimeter, a continuous bead of exterior sealant, and new weatherstripping. If your door is wind-rated, this is where the anchoring pattern matches the manufacturer’s spec exactly – inspectors in Collin County check that.
Stage 5: Trim, Hardware, and Walkthrough (2 to 3 hours)
Casing, threshold, and any hardware go on. We test the swing, the deadbolt alignment, and the weather seal with a dollar-bill test at every edge. Then we walk you through the whole install, hand over the warranty paperwork, and leave the site clean. One-day installs finish same day; whole-house jobs spread across the week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Actually Choose Between
Here’s the honest trade-off on each decision, so you’re not guessing at the showroom.
- Steel entry doors: The value pick. Tough, secure, and the standard for most Anna subdivisions. Dent-prone under impact, and the factory finish needs repainting every 8 to 10 years in our sun. Good for front entries where security matters more than looks.
- Fiberglass entry doors: Won’t dent, won’t rust, and holds a wood-grain finish far longer than steel in North Texas heat. Costs 20 to 30 percent more than steel. The right call if the door faces west and takes afternoon sun.
- Wood entry doors: The premium finish. Beautiful, and the most expensive to maintain in a wet-dry climate. Requires re-sealing every 2 to 3 years or it checks and warps. Suits covered porches, not full-sun exposures.
- Impact-rated and wind-rated doors: The resilience choice for Anna. Enclosed frames, reinforced locksets, and heavier anchoring. Adds 15 to 30 percent to the price and takes lead time, but they’re what keep a wind-driven rain event outside.
- Interior doors: Hollow-core is fine for closets and the budget; solid-core is worth the extra $80 to $150 per door for bedrooms and bathrooms on noise. Pre-hung units make installation faster and tighter than slab-only swaps.
- Hardware: The choice that gets overlooked. Grade-1 deadbolts and a quality handle set (Sterling and Grohe both make solid options for entry hardware) add $150 to $400 and are the difference between a door that holds and one that doesn’t.
Door Installation Cost in Anna, TX

Entry door replacement in Anna runs $650 to $2,800 installed, and interior door swaps run $250 to $600 each. Where you land in that range depends on five things:
- Door material and size: Steel at the low end, fiberglass mid, wood or impact-rated at the top. Oversized or non-standard widths add $200 to $500.
- Existing frame condition: A rotten jamb or out-of-square opening adds framing labor – typically $200 to $600.
- Whether you’re relocating the opening: Moving a door in a load-bearing wall means structural framing and new header work; adds $800 to $2,500 and requires a permit.
- Hardware grade: Grade-1 locksets and premium handles add $150 to $400.
- Permit and inspection scope: A straight replacement of the same-size unit usually doesn’t require a permit; a new opening or a structural change does, and carries an inspection we coordinate.
Your written estimate itemizes every one of these. What’s included: removal and disposal, new flashing, insulation, sealant, new trim, hardware install, and cleanup. What typically isn’t: painting or staining the new door and casing, and any rot repair we discover under the trim once the old door comes out – we quote those as they come up, in writing, before doing the work.
See the difference
Before
After
Before
After
Before
AfterWhat Anna Homes Specifically Do to This Job
Anna is one of the fastest-growing exurban towns on US-75 north of McKinney, and construction here is overwhelmingly new-build and subdivision-scale. That changes this job. Most of the doors we install in Anna are in homes less than fifteen years old, and the failure mode isn’t worn-out wood – it’s early-life settling. Blackland clay expands and contracts hard with wet and dry cycles, and on the newest lots that clay sits over fresh fill dirt with grading that hasn’t matured yet. Doors that stick, drag at the top, or show a growing gap at the strike plate in year three or four are telling you the slab is moving under the frame.
Wind load matters here too. Anna sits in the corridor that gets the hail and straight-line wind events coming off the blackland prairie, and doors facing west or north take the brunt. A fiberglass door with proper anchoring holds; a builder-grade steel unit with a thin hinge pattern does not. When we work in the newer tracts off the US-75 corridor and around the older town core, we spec impact-rated hardware and inspect the rough opening for settling before we set a single hinge. If a door installation is part of a larger project, we’ll coordinate the sequencing with the Windows & Doors in Anna scope so the envelope closes in the right order. Our Anna service area covers the full town, ZIP 75409, including the master-planned phases still under construction.
Serving Anna, TX – Our Local Coverage Area
We serve Anna and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Anna

A single exterior or interior door takes one day, usually four to six hours of install time. Whole-house jobs run three to five days, and custom or impact-rated doors add two to six weeks of lead time before we start. Call (888) 343-9048 for a schedule based on your door choice.
A straight same-size replacement typically does not require a permit in Anna; a new opening or a structural change to a load-bearing wall does, and we pull it and manage the inspection for you. Call (888) 343-9048 and we’ll confirm the permit scope for your specific door.
Yes – most of our Anna door installations are direct swaps in the existing opening with no structural work. If the door needs to move or a load-bearing wall is involved, we price the framing and permit separately and show you the number before any work begins.
Entry doors run $650 to $2,800 installed; interior doors run $250 to $600 each. Impact-rated and custom doors sit at the top of that range. Call (888) 343-9048 for an exact written quote on your doors – the on-site estimate is free.
Every door we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (888) 343-9048 to schedule your free estimate.
Get a Written Door Installation Estimate in Anna
Call (888) 343-9048 to schedule a free on-site estimate. We’ll measure every opening, confirm what’s sticking and why, and hand you a line-item quote that separates labor, materials, and anything the framing turns out to need. No change orders after the fact, no surprises on the invoice. A live person answers around the clock. If your project pairs new doors with Cabinets & Countertops in Anna or a Garage Conversion ADU in Anna, we’ll scope the whole thing together so the schedule holds.
Written by the team at Groundwork Construction Co. of Allen.












