







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Fairview, TX: What the Job Really Involves
Door installation in Fairview typically takes one to two days for an exterior door and two to four hours for an interior one, with most exterior replacements running $1,200 to $4,500 depending on the door, the frame condition, and whether wind-rated hardware is required. Entry doors sit at the higher end because they carry the wind-load requirements North Texas demands. Call (888) 343-9048 for a free on-site estimate and we’ll give you a written line-item price before anything gets ordered.
How we run a door installation, start to finish

Every door job follows the same five stages. The schedule is predictable, and you’ll know exactly what happens on day one versus day three.
- Stage 1 – On-site measure and assessment (about 45 minutes). We measure the rough opening, check the wall for plumb and square, and look at the existing frame for rot, water damage, or foundation movement. North Texas clay soils shift, and a door that suddenly sticks in summer is usually telling you the frame moved. You decide here whether we’re doing a like-for-like swap or resizing the opening.
- Stage 2 – Product selection and ordering (one to three weeks lead time). You pick the door slab, the frame material, the finish, and the hardware. We confirm the wind rating and whether your HOA has an approved color. This is where most of the timeline lives, so choose early.
- Stage 3 – Demo and prep (half a day). We pull the old door, trim, and threshold. We inspect the framing and sill for rot, flash the opening properly, and repair any soft wood before the new unit goes in. Skipping this step is how doors leak two summers later.
- Stage 4 – Set, shim, and seal (half a day). The new door gets set level and square, shimmed at the hinge points, insulated, and flashed. We hang the hardware, adjust the strike plate, and make sure the door closes with a two-finger push. No dragging, no daylight.
- Stage 5 – Trim, finish, and walkthrough (half a day). We reinstall or replace the interior and exterior trim, caulk the seams, and touch up paint. Then we walk you through the operation and hand over the warranty paperwork. Most jobs wrap in a single day once the door is on site.
You decide three things along the way: the door itself, the finish, and whether the frame gets replaced or reused. Everything else is on us. Multiple trades under one roof means no waiting on a sub to come back for trim.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options Fairview homeowners actually choose between
Door installation is a spec decision more than a labor decision. What you pick drives both the price and how long the door lasts in Texas heat and hail.
- Fiberglass entry doors. The default for exterior work here. They resist dents, hold paint, and handle sun exposure far better than steel. Expect $1,800 to $3,500 installed with a quality frame.
- Steel entry doors. Strong and secure, but they dent under hail and can rust at the bottom edge if water sits. Fine for a back door under a covered porch, riskier on an exposed face.
- Solid wood and wood-clad. Beautiful and period-appropriate for the custom homes here, but they need ongoing finish maintenance. Budget $2,500 to $4,500 and plan to reseal every few years.
- Impact-rated and reinforced units. Built for wind-borne debris. The frame, hinges, and multi-point lock all work together to hold the door in a storm. Costs more up front but often satisfies insurance requirements.
- Interior doors. Hollow-core for closets and budget rooms, solid-core for bedrooms and bathrooms where sound matters. Hardware matters too: a solid lever set from a brand like Delta or Moen outlasts builder-grade knobs by years.
You can read more about how doors fit into the wider envelope on our Windows & Doors service page.
What Door Installation costs in Fairview, TX

Interior door installation runs $350 to $900 per door installed, including hardware. Exterior entry doors run $1,200 to $4,500, with impact-rated or custom units pushing toward the top of that band. Here’s what’s inside the number:
Four things push a job from the low end to the high end: door size and grade, the condition of the existing frame and sill when we open the wall, whether the opening has to be resized, and the wind rating your insurer or HOA requires. A straight swap on a sound frame is the low number. A door that needs new framing, flashing repair, and a permit sits at the top.
Every written estimate from us is line-item: door, labor, trim, hardware, disposal, permit if required. What isn’t included is any structural reframing discovered after demo, which we always quote before proceeding. Upfront pricing, no surprises. Our Windows & Doors in Fairview page covers the broader envelope work if you’re planning more than one opening.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview homes specifically do to this job
Fairview’s housing stock is dominated by large, custom-built homes on lots of an acre or more, many built from the 1990s through the 2010s, with a steady wave of tear-down rebuilds and additions. That changes door work in ways a production-subdivision job never sees. We routinely match existing high-end finishes on a replacement door, and we integrate new openings around complex rooflines where the header and framing aren’t standard. The dense tree canopy across Fairview’s older estates means we plan staging and material delivery around tree protection, and we coordinate with arborists before equipment comes onto a wooded lot. On the 75002 side, blackland clay soils shrink and swell with our wet-dry cycles, so foundation movement shows up as doors that stick in August and swing free in February. We check the frame for that movement before quoting. The seasonal urgency is real too: North Texas hail and straight-line winds in spring and fall, and a door with a failing seal or a warped frame is the first thing that lets water in. When it’s time to pair exterior work with interior updates, many homeowners also look at our Cabinets & Countertops in Fairview work, and some go further with a Garage Conversion ADU in Fairview. We cover all of Fairview and the surrounding area.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Door Installation in Fairview

Interior doors take two to four hours each; an exterior entry door takes one to two days once it’s on site, with the door order itself usually one to three weeks out. Call (888) 343-9048 for a free estimate and a firm timeline.
Often no for a like-for-like replacement, but yes when the opening changes size, the header is altered, or the door is part of a structural or addition project. We pull the permits and pass the inspections, and we confirm the requirement with the town before we quote.
Yes, in the vast majority of replacements. A standard swap reuses the existing opening. Resizing or adding a door is a framing job, and that’s where a permit and structural review come in. You’ll know which one you’re getting from the estimate.
A door with a bad seal or a warped frame lets water into the wall cavity, and the repair often runs $800 to $2,500 once the framing and drywall are opened up. Catching it early is the cheaper path.
Every door installation is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing.
Get a free Door Installation estimate in Fairview
A written, line-item estimate for Door Installation in Fairview is free. Call (888) 343-9048 and a live person answers, day or night. We’ll schedule an on-site measure, confirm the wind rating and any permit needs, and hand you a fixed price with no change orders. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












