







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Paver Driveways in Allen, TX Actually Cost and How Long They Take
Paver driveways in Allen typically run $7,000 to $18,000 for a standard two-car apron and approach, and most jobs are finished in four to seven working days once materials are on site. You’re replacing a cracked, heaving slab with a surface that flexes with North Texas clay instead of fighting it. Call (888) 343-9048 for a free on-site estimate and a written line-item quote before anything gets torn out.
How We Build Paver Driveways in Allen, Stage by Stage

A paver driveway is mostly the work you never see. The stone is the last 20% of the job. Here’s the actual sequence so you know what’s happening on your property each day.
Day 1: Layout, demo, and the saw-cut
We mark the new footprint with stakes and string, confirm the slope away from the garage sill, then saw-cut and break out the old concrete or asphalt. A typical Allen two-car apron is 400 to 600 square feet, and demo plus haul-off takes a full day. You decide now whether the driveway edge stays flush with the lawn or gets a soldier-course border, since that changes the excavation width.
Day 2: Excavation and sub-base
We dig down 8 to 10 inches and compact a crushed stone base in lifts, wetting and running a plate compactor between each pass. On the blackland clay under most Allen subdivisions this base is the whole ballgame. Skip it and the pavers telegraph every soil movement within two summers.
Day 3: Grading, geotextile, and bedding sand
We set final grade, roll out a woven geotextile to keep clay fines from pumping up into the bedding, and screed a one-inch sand bed. This is the day you’ll see the laser level come out. Proper drainage matters here because a driveway that pools water at the garage door is a foundation problem, not a paving problem.
Days 4 – 5: Paver laying, cuts, and edge restraint
The crew lays the field, makes the cuts at curves and the apron, and locks the perimeter with spiked edge restraint. A 500-square-foot drive takes two experienced hands about a day and a half. You confirm the pattern and color blend before the first pallet opens, not after.
Day 6 – 7: Polymeric sand, compaction, and cleanup
We sweep polymeric sand into the joints, mist it to activate, run a final compaction pass, and clean the site. The drive is walkable the same day and drivable within 24 hours. Total elapsed time is usually four to seven working days, weather permitting.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Pavers You’ll Choose Between
Material choice drives both the look and roughly 30% of your final number. Here’s the honest trade-off on each.
- Standard concrete pavers (tumbled or straight-edge): The workhorse. About $4 to $8 per square foot in material. Holds color for years, individual units swap out if one cracks, and the interlocking pattern handles minor soil shift. Best value for most Allen homes.
- Clay brick pavers: Warmer color depth that weathers instead of fading. Costs more, and North Texas freeze-thaw cycles can spall a low-grade brick, so specify a paving-grade unit. Suits the brick-veneer Tudor and traditional facades common off Bethany Ridge.
- Permeable pavers with open joints: Lets stormwater drain through the base instead of sheeting toward the street. Worth considering if your lot drains poorly; costs 10 to 15% more because the base course is deeper.
- Color and finish: Through-body color resists fading; a surface-applied tint is cheaper but shows wear at the tire tracks first. Honed or shot-blast faces stay grippy in rain; polished faces look sharp but get slick.
We can also match a paver driveway to a matching walk and stoop as part of a full Driveway & Pavers in Allen plan, so the hardscape reads as one design instead of three separate projects.
What Paver Driveways Cost in Allen, TX

Plan on $7,000 to $18,000 for paver driveway installation in Allen. That range covers a standard two-car drive with base prep, pavers, edge restraint, and polymeric sand. Here’s what pushes a job toward either end.
- Square footage: A 400-square-foot apron sits near the low end; a 700-square-foot drive with a turnaround climbs toward the top.
- Existing surface and demo: Breaking out and hauling off thick concrete costs more than stripping asphalt. Add $500 to $1,500 for heavy demo.
- Base depth and soil conditions: Poorly draining clay or a slope correction means deeper excavation and more stone. Budget another 10 to 20%.
- Paver grade: Concrete pavers keep costs down; clay brick or permeable systems add cost per square foot.
- Pattern and border: A running-bond field is the most efficient lay. Herringbone, circles, or soldier-course borders add labor.
A written estimate lists the square footage, paver type, base depth, edge restraint, sand, demo, and disposal, so the number you see is the number you pay. What it typically doesn’t include: driveway sealing (a separate service), relocating a buried sprinkler line or gas meter, and any city permit or HOA architectural-review fee. We pull the permits and pass the inspections. Pairing the drive with a front walk or a new door is common, and homeowners often fold Door Installation in Allen into the same exterior refresh.
See the difference
Before
After
Before
After
Before
AfterWhat Allen Homes Specifically Do to This Job
Allen was built out in one long 1990s – 2000s wave, so most of the driveways we replace are original builder-grade concrete that’s now 20 to 30 years old and showing it. The expansive blackland-clay soil under neighborhoods like Watters Crossing and Twin Creeks moves with every wet-dry cycle, and that movement cracks slabs and drops one corner of the apron below the garage sill. Add hail-season pocking and sun-baked surface spalling and you get a driveway that’s past patching.
What catches out-of-town crews here is process, not paving. Allen’s permitting and inspections run stricter than the newer edges of McKinney or Frisco, and the HOA subdivisions across Bethany Ridge frequently require architectural-review pre-approval before a city permit is issued, sometimes down to the paver color and driveway width. We handle the HOA packet and the permit so your project doesn’t stall in a review queue. It’s the same discipline that makes Allen projects run smoother when the paperwork starts early, and it’s why we build the schedule around inspection windows instead of around them.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Allen

Most paver driveways in Allen take four to seven working days from demo to cleanup, plus a permit turnaround if your subdivision requires one. Weather and material lead times are the two things that can stretch it. Call (888) 343-9048 and we’ll give you a realistic start date, not a guess.
Often yes for a full replacement, and most Allen HOA neighborhoods also require architectural-review approval before the city will issue a permit. We check both on your address, pull the permit, and handle the inspection. Call us at (888) 343-9048 to get the paperwork started.
Only in narrow cases where the slab is sound and drainage allows; most Allen driveways we see are too cracked or heaving to go over. A proper install means removing the old surface and rebuilding the base. Call (888) 343-9048 for a free assessment of whether yours can stay.
Paver driveways run $7,000 to $18,000 in Allen, versus $4,500 to $12,000 for concrete. The premium buys individual-unit repair and flexibility over shifting clay. Call (888) 343-9048 for a line-item quote on your drive.
Every paver driveway we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (888) 343-9048 to schedule your free estimate.
Get a Free Paver Driveway Estimate in Allen
Book a free on-site estimate for paver driveways in Allen at (888) 343-9048. We’ll measure the drive, check drainage and soil, walk you through paver options and base depth, and leave you with a written line-item quote and upfront pricing. A live person answers around the clock. You’ll know your number and your start date before you commit to anything.
Written by the team at Groundwork Construction Co.












