







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Garage Conversion ADU in Allen, TX: What It Takes and What It Costs
A garage conversion ADU in Allen, TX runs $45,000 – $130,000 and takes roughly 3 to 5 months from permit to final inspection, depending on whether you’re adding a bathroom, a kitchenette and a separate exterior entrance. The work is a real remodel, not a cosmetic flip: you’re adding insulation, HVAC, egress, plumbing and a fire-rated separation between the new living space and the house. Call (888) 343-9048 to schedule a free on-site estimate and get a written, line-item scope.
Your builder cut corners on the garage, and a conversion makes that obvious

The slab in a 1990s or 2000s Allen subdivision garage is almost always poured at a pitch toward the door with no vapor barrier worth trusting, the walls are framed for storage, not living, and the ceiling is uninsulated. Nothing in that original build was meant to hold conditioned air. A conversion forces the issue. The moment you frame a bathroom wall and run a supply line, the slab you ignored for twenty years becomes the floor you sleep on. That’s why our first week is spent on things nobody photographs: moisture readings at the slab, the depth of the existing foundation edge relative to the driveway, and whether the overhead door opening can be infilled and insulated to meet the energy and egress requirements the city will inspect.
We treat this as part of a full Home Additions & ADU in Allen scope when the garage conversion pulls in structural, mechanical and exterior work at the same time. Every project we take on is covered by the 730-Day Done Right Promise, and our pricing is written up front, line by line, so the number you approve is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How the work actually sequences, stage by stage
This is the part most bids skip. Here’s what a garage conversion ADU in Allen actually looks like on the calendar.
- Stage 1: Design, engineering and permit, 4 to 8 weeks. We measure the slab, confirm the foundation edge, and draft a plan set that shows egress windows, smoke and CO separation from the house, and the mechanical layout. You decide here whether the new unit gets its own utility meter or ties into the house panel. Allen’s building department reviews thoroughly, so this stage is not where you save time in exchange for a correction letter later. If your HOA requires architectural review, that approval has to be in hand before the city issues the permit in most Allen subdivisions.
- Stage 2: Demolition and slab prep, 3 to 5 days. The overhead door comes out, the track and opener go, and the opening gets framed and infilled. We grind or self-level the slab so the finished floor sits flat, then apply a vapor barrier and pour a topping slab where moisture readings call for it. You decide the finished floor here, and it matters: adhesive-set tile and engineered vinyl plank tolerate the slab’s residual moisture; solid hardwood usually doesn’t, and carpet over a garage slab in North Texas is a bad bet.
- Stage 3: Framing, rough mechanical, electrical and plumbing, 2 to 3 weeks. New interior walls go up, the bathroom gets its drain and supply runs, and the HVAC gets its own mini-split or a ducted tie-in with a damper. Electrical covers dedicated circuits, lighting, and the panel capacity for a kitchenette. This is when the city’s rough-in inspection happens, and it’s the inspection most out-of-town crews fail on their first pass. You choose fixture rough-in locations now; moving them afterward is expensive.
- Stage 4: Insulation, drywall, and the stuff that makes it feel like a room, 3 to 4 weeks. We insulate the infilled door opening, the exterior walls and the ceiling above the garage to a level that keeps the unit comfortable in a 100-degree Allen August, then hang and finish drywall. Exterior finish, the new man door, and window trim land here. You pick paint, trim and door styles. This is also where the kitchenette or full kitchen gets set.
- Stage 5: Finishes, final inspection, walkthrough, 2 to 3 weeks. Tile, fixtures, cabinets, countertops, flooring, paint, and punch list. The city signs off on final building, electrical, plumbing and mechanical. You get a walkthrough and a written warranty. Nothing about the job is finished until that final inspection passes.
The choices that actually move the outcome
Most of the money sits in five decisions. Here’s the honest trade-off on each.
- Bathroom: half bath vs. full bath. A half bath needs supply and drain but no tub or shower pan, which is the single biggest cost swing in the plan. A full bath means a shower pan, a proper drain and a vent fan tied to the building envelope, and it usually requires a floor drain and more slab work. A full bath makes the unit honestly livable and adds rentable value.
- Climate control: ductless mini-split vs. extending the house system. A mini-split is a self-contained unit, cheap to run and easy to zone, and it doesn’t tax a 20-year-old air handler that’s already near the end of its life. Tying into the house system keeps one thermostat but means resizing equipment, adding a return, and risking comfort problems in a space that was never in the original load calculation.
- Kitchenette vs. full kitchen. A kitchenette (sink, under-counter fridge, microwave) is a common and sensible middle. A full kitchen means a 240V range circuit and more ventilation. If you plan to rent, a full kitchen widens your pool of tenants. Sterling makes a range of kitchen sinks and fixtures that hold up well in a rental-grade build, and Grohe faucets are a common pick for their cartridge longevity.
- Insulation and window package. Garage walls typically get R-13 at best. Upgrading the ceiling assembly and using low-E windows pays back in comfort and utility bills across the unit’s life. This is where “build it once, build it right” actually means dollars saved.
- Finish grade. Builder-grade LVP and a simple vanity can save $8,000 – $15,000 over tile and custom cabinetry. The trick is matching finish durability to use, not picking the cheapest or the most expensive.
See the difference
Before
After
Before
After
Before
AfterWhat a garage conversion ADU costs in Allen, TX
Our Allen range for this work is $45,000 – $130,000. A simple studio with a half bath and a mini-split sits near the low end. A one-bedroom with a full bath, kitchenette, separate entrance and upgraded finishes lands near the top.
| Line item | Typical range |
|---|---|
| Permit, design and engineering | $3,500 – $9,000 |
| Slab prep and moisture work | $4,000 – $12,000 |
| Framing, infill and drywall | $8,000 – $20,000 |
| Electrical and panel work | $5,000 – $14,000 |
| Plumbing (half bath to full bath) | $4,000 – $16,000 |
| HVAC (mini-split or tie-in) | $4,500 – $11,000 |
| Insulation, windows and exterior | $6,000 – $18,000 |
| Kitchenette, bath fixtures and finishes | $10,000 – $30,000 |
What pushes a job toward $130,000: a full kitchen with a 240V range, relocating a drain line into a new slab trench, an undersized electrical panel that triggers a service upgrade, or an existing foundation that requires piering before you build living space onto it. What keeps it near $45,000: keeping the bathroom on a half bath, keeping the utility tie-ins short, and not moving any plumbing.
Every written estimate we produce includes what’s permitted, what’s inspected, and what’s in the warranty. What it doesn’t include unless it’s spelled out: landscaping repair from excavation, appliance packages, furniture, and any HOA architectural-review fees. We itemize the exclusions so nothing surprises you at the end. Call (888) 343-9048 for a free estimate, and bring your HOA documents if you have them.
What Allen homes specifically do to this job

Allen is a Collin County master-planned suburb that was largely built out in a single 1990s – 2000s wave. That means nearly every garage conversion here is a second-generation renovation on 20- to 30-year-old subdivision stock, not new construction and not old-house repair. The houses we most often convert sit in Watters Crossing, Twin Creeks and Bethany Ridge, and they share a common set of problems: builder-grade slabs, PEX or early CPVC plumbing, and a garage that was never meant to be conditioned.
The soil is the other factor. North Texas blackland clay moves with the seasons, and a garage slab shows the effects before anything else does. We check for movement and moisture before drawing a plan, because a foundation that’s already shifting can’t carry a living space without attention first.
Then there’s Allen’s permitting and inspections, which are stricter than in neighboring McKinney or on Frisco’s newer edges. The 1990s – 2000s HOA subdivisions here routinely require architectural-review pre-approval before the city issues a permit, and crews from out of town skip this step and stall the job. Plan for HOA review before permit, not after. It’s the difference between a 5-month job and a 7-month one.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Garage Conversion ADU in Allen
Plan for 3 to 5 months from signed contract to final inspection. The two biggest stretch factors are Allen’s permit review timeline and any HOA architectural review, both of which happen before demolition. A simple half-bath studio can come in under 3 months if the permit is clean on the first pass.
Yes. A garage conversion is a change of use, not a cosmetic remodel, so it requires building, electrical, plumbing and mechanical permits, plus inspections at each stage. Skipping the permit creates real problems at resale and with insurance. We pull the permits and carry the job through inspection as part of the estimate, not as an add-on.
Often, yes. A studio with a half bath placed against the house wall keeps plumbing runs short and avoids the structural work of raising or reframing. The moment you want a full bath with a shower pan, or a kitchenette with a range, the scope grows. We tell you honestly during the estimate which version your specific garage can support.
$45,000 – $130,000, with a simple studio near the bottom and a one-bedroom full-bath unit near the top. The spread comes from bathroom type, HVAC approach, electrical panel condition and finish grade. Call (888) 343-9048 for an exact number; estimates are free and written line by line.
Every conversion we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship for over two years past the final inspection. Manufacturer warranties on materials and systems run on their own terms, and we walk you through the paperwork at the final walkthrough.
Get a free estimate for your Allen garage conversion

Call (888) 343-9048 and we’ll set up a free on-site estimate at your Allen home. We’ll measure the garage, check the slab, confirm what the electrical panel can support, and talk through half bath versus full and mini-split versus house tie-in. You’ll get a written, line-item scope, a realistic schedule, and the exclusions spelled out. Some Allen homeowners pair this with Asphalt Driveways & Resurfacing in Allen or Concrete Driveways & Concrete Work in Allen to restore parking space once the garage becomes living space. Our Home Additions & ADU service brings the same process across the whole Allen service area.
Written by the team at Groundwork Construction Co.












