







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Allen, TX: What It Costs and How Long It Takes
Most chain link fence jobs in Allen run $3,500 to $9,000 for a typical residential lot line, and a standard installation takes one to three days depending on linear footage and how many gates you need. The fence itself goes up fast; the permits and HOA architectural review are usually what set the schedule. Call (888) 343-9048 and we’ll walk your property line, measure the run, and give you a fixed written quote with the exact footage and gauge spelled out.
How a Chain Link Fence Goes In, Stage by Stage

Chain link isn’t a complicated build, but the sequence matters more than people expect. Here’s how a job actually runs from the first call to the final walkthrough.
- Stage 1: Site walk and layout (day 1, about an hour). We walk the property line with you, confirm the corners and any tie-ins to existing fence, and mark the run with paint or flags. This is where you decide gate placement and swing direction. Getting this right the first time saves a change order later.
- Stage 2: HOA review and permit (day 1 to 10, homeowner decision point). If you’re in one of Allen’s HOA subdivisions, the architectural review comes first. We prepare the fence spec sheet and elevation detail your HOA board needs. Once approved, the city permit gets filed and the inspection gets scheduled. This stage is the slow one, and it’s why we tell people to start the paperwork before they’re in a hurry.
- Stage 3: Utility locate and line clearing (day 1 on site, 2 to 4 hours). Texas law requires locates before digging posts, so we wait for the utility flags to clear. Then we remove old fence panels and posts, or clear brush and roots along the run. We don’t start setting posts until the locate is confirmed.
- Stage 4: Post setting (day 1 and 2, 4 to 8 hours). Terminal posts and corner posts get concrete footings set below the local frost line; line posts go in on spacing that matches the manufacturer’s wind rating. Concrete needs to cure, so on a big run this can push fabric installation to the next day. On North Texas blackland clay, footing and drainage decisions at this stage are what keep the fence plumb for years.
- Stage 5: Fabric, gates, tension wire (day 2 or 3, 3 to 6 hours). We stretch the mesh, hang the gates, install tension bars and top rail, and set gate hardware for smooth clear swing. You walk the finished fence with us, and we hand you the paperwork for the inspection.
Total on-site time for a standard backyard or side-yard chain link in Allen is usually one to three working days once permits are in hand. Larger corner lots or jobs with multiple gates trend longer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
A chain link fence isn’t one product. The gauge, coating, and height you pick determine how it holds up through a decade of North Texas hail and heat, and how it looks from the street.
- Wire gauge: 11.5-gauge is the standard residential weight; 9-gauge is heavier and more puncture-resistant, with a real cost bump. For a typical Allen backyard line, 11.5-gauge with a good coating does the job. If deer, dogs, or kids are hard on the fence, 9-gauge earns its price.
- Coating: galvanized mesh is the base option and the most economical. Vinyl-coated (usually in black or green) costs more but holds up better in the sun and hides in the landscape. On a fence facing a greenbelt or street, the coated version reads far less industrial.
- Height: 4-foot, 5-foot, and 6-foot are the common residential heights. Height choice is where Allen HOA rules often land, so confirm the limit with your board before you order panels.
- Top rail and tension: a top rail keeps the fabric from sagging. Add tension wire at the bottom for a cleaner line and better wind performance. On runs facing open farmland (common on the Lucas and Fairview edges of town), tension wire makes a visible difference.
- Gates and hardware: walk gates are standard; double swing gates cost more but are worth it if you need to move a trailer or yard equipment through. Self-closing hinges are a decision to make up front, not after the posts are set.
- Privacy slats or privacy ties: an add-on that partially blocks sightlines. It’s a popular upgrade in nearby Murphy and Fairview, and it’s an easy later addition if you don’t want the cost up front.
If the job is part of a full Fence Installation in Allen plan that touches several property lines, we’ll sequence the material choices together so the fence doesn’t look like it was bought in two separate trips.
What a Chain Link Fence Costs in Allen, TX

Plan on $3,500 to $9,000 for most chain link fence work in Allen. Where a job lands in that band comes down to a short list of variables:
- Linear footage: a small side-yard run sits near the low end; a full perimeter on a corner lot pushes toward the high end.
- Existing condition: tearing out and hauling off an old fence adds cost. Old posts set in deep concrete take longer to pull than to set.
- Gate count and hardware: each additional walk gate, and every double swing gate, adds labor and parts.
- Material grade: 9-gauge wire, vinyl coating, and tension wire all raise the number. Standard galvanized 11.5-gauge is the cheaper build.
- Permit scope and HOA review: the paperwork is time, not usually a big dollar line, but it can change the schedule and occasionally triggers a survey requirement.
- Site access: a run that has to be hand-carried around a pool, a shed, or through a tight side yard takes more labor than an open backyard.
A written estimate from us lists footage, gauge, post spacing, gate quantities, demo, and disposal as separate lines, so you can see where your dollars are going. It doesn’t include landscaping repair beyond basic raking, and it doesn’t include removing existing concrete footings deeper than standard – those get quoted when we see them. Upfront pricing, no surprises: the number you sign is the number you pay, and the work carries our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Allen Homes Specifically Do to This Job
Allen was built out in a single growth wave, and that shape shows up in fence work. Most of the properties we see are 1990s to 2010s builder-grade subdivisions, which means we’re rarely repairing a 50-year-old fence – we’re replacing a 20- to 30-year-old one that a homeowner has already patched twice. The original chain link and wood fencing on those lots is now at end of life, and the posts are set in the same expansive blackland clay that’s been shifting them for decades. Hail-prone spring storms are the other driver: bent top rail and punched mesh after a storm are the most common chain link calls we get in town.
Permitting here is stricter than on the newer edges of McKinney or Frisco, and the HOA layer is real. Subdivisions like Watters Crossing, Twin Creeks, and Bethany Ridge frequently require architectural-review pre-approval on fence height and placement before a city permit is issued. Crews from out of town skip that step and then have to pull panels back out. We do the HOA paperwork and the city permit up front so the inspection passes the first time around.
If you’re also opening up the backyard for a new structure, homeowners often pair this with ADU Site Prep & Utilities in Allen so the fence, grading, and utility trenching get planned together instead of in two separate digs. When a gate leads to a detached garage or shop, they often pair it with Door Installation in Allen too. We cover the whole of Allen, and the same crews handle nearby Fairview, Lucas, and Murphy.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Allen

On-site work is usually one to three days. The full calendar time is often two to four weeks when you add HOA architectural review and the city permit, so start the paperwork early if you have a date to hit. Call (888) 343-9048 and we’ll give you a realistic start date once we know your subdivision.
Yes, residential fencing in Allen requires a city permit, and HOA subdivisions require architectural-review approval first. We handle both as part of the job and schedule the inspection so the fence is signed off without a reinspection fee. Call (888) 343-9048 to confirm what your specific subdivision requires.
We keep disturbance to the fence line itself: posts go in with an auger or spade, and the fabric goes up without driving equipment across the lawn. Root cutting is limited to what’s directly in the post path, and we rake and haul off debris when we leave. For a tight lot or a run beside a pool, we’ll flag what we need to move and confirm with you before we start. Call (888) 343-9048 to walk the layout.
Most Allen jobs land in the $3,500 to $9,000 range for the whole job, which works out to roughly $15 to $28 per linear foot depending on gauge, coating, and gate count. A basic galvanized run sits at the low end; a coated 6-foot run with double gates and a tension wire pushes higher. Call (888) 343-9048 for an exact per-foot quote based on your measured footage.
Workmanship on your chain link fence is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Material warranties come from the fencing manufacturer and vary by grade. Call (888) 343-9048 and we’ll spell out both in writing before you sign.
Get a Free Chain Link Fence Estimate in Allen
If your chain link fence in Allen is bent from last spring’s hail, rusted through, or due for replacement before the next storm season, call (888) 343-9048. We’ll walk the line with you, measure the footage, and hand you a fixed written quote with the gauge, coating, and gate count itemized. Estimates are free, a live person answers every call around the clock, and our technicians are background-checked and arrive in uniform. You can read more about our wider scope on our Fence Installation service page before you call.
Written by the team at Groundwork Construction Co.












