







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Allen: What the Job Actually Involves and Costs
New cabinets and countertops in Allen typically run $14,000 to $45,000 as part of a kitchen update – a low-end reface-and-top swap landing nearer the bottom of that range, a full tear-out with semi-custom cabinets and quartz landing near the top. Most jobs take three to five weeks from demo day to final countertop install. Call (888) 343-9048 for a free on-site estimate.
What that number buys depends on three things: how much of the existing layout stays, what cabinet line you choose, and whether the countertop is fabricated from a slab or cut from stock tile or quartz remnants.
How We Run a Cabinets & Countertops Job in Allen, Start to Finish

Sequence matters more than almost anything else here. A crew that reverse-engineers the order of operations midway through the job causes a bad fit or a torn-out wall finish. Here’s how we run it.
Day 1: Measure and template
We take field measurements of the actual room, not the plan drawing. This is where we find out whether the walls are square, which they almost never are in a 1990s Allen subdivision build. We also check the plumbing rough-in and outlet locations against the plan, because moving a sink a foot changes both costs.
Stage 2: Order cabinets and countertops (3 to 6 weeks for delivery)
Semi-custom cabinet lead times run three to six weeks. Countertop slabs get selected in this window. This is where the homeowner makes the big material decisions: cabinet door style, finish, overlay type, and the countertop material. You should have these settled before demo starts, not after.
Stage 3: Demolition and rough-in (2 to 3 days)
Old cabinets and countertops come out. Any electrical or plumbing that needs to move happens now, before new boxes go in. Drywall patching follows. This is the messy stage, so plan to be out of the kitchen for it.
Stage 4: Cabinet installation (2 to 4 days)
Cabinets get set, leveled, and shimmed. We scribe filler panels to the walls rather than caulking a gap, which is the difference between a cabinet run that looks built-in and one that looks attached. Cabinet hardware gets drilled last, after doors and drawers are hung.
Stage 5: Countertop template and install (1 day template, 5 to 10 business days fabricate, 1 day install)
Once base cabinets are in and levelled, a templater comes out to measure the actual cabinet run and sink cutout. Slabs are fabricated to that template. Installation is one day. Caulking, connection of the sink and disposal, and a final walkthrough round it out.
Our technicians have up to 12 years of experience on these installs. Every job is covered by the 730-Day Done Right Promise – if something’s not done right, we make it right, and that covers the joinery and fit, not just the material warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinet and Countertop Options You’ll Actually Choose From
Here’s where most homeowners spend the most decision time, and where getting a straight answer early saves weeks.
- Cabinet construction: Stock cabinets are cheapest and fast – 1 to 2 week lead times – but come in fixed sizes, so a 63-inch wall gets filler panels. Semi-custom lets you specify width to the inch and add the drawer stack you actually want. The price gap usually runs $3,000 to $8,000 between the two, and semi-custom is worth it whenever the wall dimensions aren’t clean.
- Box material and finish: Plywood boxes outlast particleboard in a Texas kitchen where the humidity swings. Thermofoil finishes look sharp for the first few years and then start peeling at seams in a hot kitchen. Painted and stained maple and oak hold up far better under daily use.
- Countertop material: Quartz is the default for Allen homes and the most durable for the money – nonporous, no sealing, and it handles the wear of a busy household. Granite is beautiful but porous and needs resealing annually. Laminate is the budget option and the practical one for a rental or a flip. Solid surface like Corian has the advantage of being repairable if it chips.
- Edge profiles and overhangs: A standard eased edge adds nothing to cost. A thick built-up edge, a waterfall end, or a large island overhang for seating adds fabrication time and supports. These are the small line items that quietly add $500 to $2,000.
- Sink and faucet: An undermount sink requires the countertop fabricator to cut the hole and polish the edge, so the sink needs to be selected before templating. A drop-in sink can be installed after the counter. Faucets from brands like Grohe or Sterling work fine, and the rough-in valve is usually what dictates which faucets fit.
What Cabinets & Countertops Cost in Allen, TX

Here’s the number range broken out by line item so you can see what each piece contributes.
| Line item | Typical Allen range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island | $3,000 – $10,000 |
| Backsplash (often done with the tops) | $800 – $2,500 |
| Full kitchen remodel (when scope widens) | $14,000 – $45,000 |
What pushes a job to the high end:
Size and layout. A galley kitchen with 20 linear feet of cabinets and a straight run sits at the bottom. An L-shape with a peninsula and an island sits at the top. Existing condition. Original builder-grade cabinets that come out cleanly cost less to remove than ones that were glued and nailed into the wall. Moving plumbing or electrical. A sink that moves two feet adds rough-in, drywall, and inspection. Material grade. Stock cabinets and laminate tops vs. semi-custom and quartz is the single biggest driver. Permit scope. A straight cabinet swap often doesn’t require a permit; the moment you move a wall, add an outlet circuit, or relocate plumbing, it does. We tell you which bucket your job falls into before you commit.
A written estimate from us is line-itemed and fixed. That means the number you see is the number you pay, with no change orders discovered mid-job. It covers demo, haul-away, cabinet installation, drywall patching, countertop template and install, sink and faucet setting, and cleanup. What it doesn’t cover unless itemized: the cost of new appliances, the cost of moving a gas line, or structural changes like removing a load-bearing wall.
See the difference
Before
After
Before
After
Before
AfterWhat Allen Homes Specifically Do to This Job
Allen’s housing stock shapes this work in specific ways. Most of the city went up in one long 1990s – 2000s building wave, so the kitchens we’re pulling apart are 20 to 30 years old. That means original builder-grade cabinets with tired hinges and drawer glides, laminate or early solid-surface counters, and a box store layout that nobody designed for a modern family. By the time we get in, the cabinets are usually past useful repair, and a reface isn’t going to solve the sagging shelf or the doors that won’t close.
The permitting reality here is stricter than much of Collin County. The city inspects its own work carefully, and the permit scope for a cabinet job is decided by what actually moves. If you’re just swapping boxes, you’re often clear; the moment a sink relocates or a circuit is added, an inspection is on the schedule, and we build that into the timeline from the start.
If your home is in a subdivision like Watters Crossing, Twin Creeks, or Bethany Ridge, the HOA may require architectural review for anything visible from the street – a window, a roofline change, or, in a kitchen that shares an exterior wall, a change in exterior venting. We’ve watched crews from outside the area skip that pre-approval step and then have to redo work. We build it into the schedule.
One practical effect of North Texas clay: as foundations shift seasonally, the kitchen walls move with them, and a cabinet run that fit three years ago can be out of level today. Careful shimming and scribing to the actual wall is standard, not optional, and it’s part of why we measure on-site rather than trusting old plans.
Covering Allen from Watters Crossing up through Twin Creeks and out toward Bethany Ridge, we’ve seen every version of this job. If you’re in the middle of a wider project – a full Kitchen Remodeling in Allen or a hands-on kitchen remodeling engagement that runs beyond cabinets and counters – we scope it alongside the same team. And some Allen homeowners pair a kitchen refresh with adding living space; we also handle Garage Conversion ADU in Allen and a New Detached ADU in Allen when a second kitchen or extended living space is part of the plan.
For the wider Allen service area, see Allen.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Allen

Three to five weeks for a typical job, driven mostly by cabinet and countertop lead times. Demolition and installation are the fast part – a few days each. The waiting is the fabrication window. Call (888) 343-9048 for a schedule that fits your specific cabinet line.
A straight cabinet swap and countertop replacement usually does not require a city permit, but relocating plumbing, adding an electrical circuit, or altering structure does. We confirm which category your job falls into before we start and pull the permits when they’re needed. If a permit is required, we handle it and the inspection.
Yes, and that’s the most common version of the job we do. Keeping the sink and range in place keeps the price near the bottom of the $14,000 – $45,000 range and cuts a week or more off the schedule. If you want the sink relocated, we can do it – it just adds rough-in, drywall, and an inspection. Call (888) 343-9048 to talk through what’s possible in your layout.
Quartz typically adds $2,000 – $6,500 to the job depending on linear footage, edge profile, and whether a waterfall or island overhang is included. Laminate is roughly half that. Quartz is the better long-term choice for a busy Allen household; laminate makes more sense for a rental or a short-term flip. Call (888) 343-9048 for a figure based on your actual counter run.
Our workmanship is covered by the 730-Day Done Right Promise – if a cabinet isn’t hung correctly or a countertop joint fails, we come back and make it right. That’s in addition to the manufacturer warranties on cabinets and countertops. The brand partner matters here: we use established lines so the material warranty is real and serviceable.
Get a Free Cabinets & Countertops Estimate in Allen
Call (888) 343-9048 to schedule a free on-site estimate for cabinets and countertops in Allen. A live person answers, 24/7 – no voicemail, no waiting until Monday. We’ll measure your kitchen, walk you through cabinet lines and countertop options, and hand you a written, line-itemed quote before you commit. Projects over $10,000 come with $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












