







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in McKinney, TX: What It Costs and How Fast It Goes In
A chain link fence in McKinney typically runs $3,500 to $9,000 for a standard residential lot, and most installs are finished in one to three days once materials land on site. That range covers posts, top rail, tension wire, fabric, and at least one walk gate. Longer runs on acreage, height changes, and a second drive gate push the number up. Call (888) 343-9048 and we’ll price your exact footage before anyone touches a shovel.
How a Chain Link Fence Goes In, Start to Finish

Chain link isn’t complicated, but it’s unforgiving of shortcuts. Set a post in loose dirt and it leans by the next hard rain. Here’s the sequence we run, and what you’re deciding at each stage.
Stage 1: Walk the line and mark utilities (day 1, 1 – 2 hours)
We walk the property line with you, confirm corners, gate positions, and any height changes. Then we call in the utility locates. In McKinney that step matters more than people expect, because 75070 and 75071 lots carry irrigation lines and pool equipment runs that aren’t always where the homeowner remembers. You decide two things here: exact fence route and gate swing direction. Everything after this follows those decisions.
Stage 2: Layout and dig (day 1, half a day on a typical lot)
We string the line, set post spacing at 8 or 10 feet, and dig. North Texas blackland clay is the variable here. Dry, it’s like chipping concrete. Wet, holes want to slump and need bracing. We dig to depth, not to a guess, so the concrete bell does its job.
Stage 3: Set posts in concrete (day 1, then cure overnight)
Terminal posts, corner posts, and gate posts get set first and they get the most concrete, because those carry the tension load. Line posts follow. Everything cures overnight. You’re not pulling fabric on green concrete, no matter how fast someone promises the job.
Stage 4: Rails, fabric, and tension (day 2, 3 – 6 hours)
Top rail goes together, tension wire runs along the bottom, fabric gets stretched with a come-along and tied off at every post. A properly stretched run is rigid to the push of a hand. A loose one rattles and sags within a season. This is the stage where cheap installs show themselves.
Stage 5: Gates, hardware, and walkthrough (day 2 into day 3)
Gates get hung, hinges and latches set, and we walk the whole run with you. You check gate clearance, tension, and post plumb. Anything that doesn’t pass gets corrected before we call it done, and workmanship sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change the Fence
Most of the price difference between two chain link quotes comes down to four decisions. Get these right and the fence outlasts the mortgage.
- Height: 4, 5, or 6 feet. Four feet is fine for marking a line. Five feet is the common residential pick across McKinney. Six feet costs more in fabric and posts but gives real containment for dogs, and many subdivisions around Stonebridge Ranch require it for side and rear lines.
- Gauge and coating. Light-gauge fabric dents and sags under a leaning dog. Heavier gauge, galvanized then vinyl-coated, holds its shape for years longer. Vinyl coating adds cost but kills the glare and the rust streaks, and in black it reads far less like a chain link fence from the street.
- Terminal post weight. Corner, gate, and end posts take the tension. Skinny posts at the terminals are the number one reason gates drop and corners pull. This is not where to save $200.
- Gates and configuration. A walk gate at the side yard is standard. A double drive gate for trailers, boats, or workshop access on acreage is a different build with heavier posts and bracing, and it’s where the range climbs toward the top end.
This is a component choice, not a brand-name choice. Where brand names earn their keep is nearby: if your project also touches a shop or outbuilding, homeowners often pair this with Door Installation in McKinney, where hardware from Moen and Delta matters in a way it never does on a fence line.
What a Chain Link Fence Costs in McKinney, TX

Expect $3,500 to $9,000 for a residential chain link fence in McKinney. Here’s how the line items stack:
- Standard residential run, 5 ft galvanized, one walk gate: $3,500 to $5,500
- 6 ft vinyl-coated with two gates: $5,500 to $8,000
- Acreage runs with double drive gates and heavier terminals: $8,000 to $9,000 and up
- Rock removal or caliche digging above normal: often a line item, not a surprise
- Fence removal and haul-off of an old line: quote as a separate line
What pushes a job to the low end: a simple rectangular lot, good digging, one gate, standard height. What pushes it high: a long irregular perimeter, corners and jogs that each need terminal posts, height changes on sloping ground in the 75069 historic core, extra gates, or rock close to the surface.
A written estimate from us lists footage by section, gauge, coating, post spacing, gate count, concrete, removal, and haul-off. What’s typically not included: utility relocation, work around a survey dispute, or repairs to landscaping we have to cross. You’ll see those called out, not discovered later. Upfront pricing, no surprises, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat McKinney Properties Specifically Do to This Job
McKinney is a city split down the middle, and chain link work feels it. In the 75069 historic core, lots are older, property lines are sometimes vague, and the stakes you can’t see are the expensive ones: century-old irrigation, old brick edging, mature pecan roots. We dig slower there and we confirm lines before we cut. In the 75070 and 75071 corridors, including Stonebridge Ranch and Adriatica, the work is newer ground with active utility runs, HOA rules on height and coating color, and a lot line that follows a builder’s plat instead of a fence that’s been there since the 1960s.
The clay is the other constant. Blackland prairie soil swells in spring and shrinks in dry August, and a post set to shallow depth will walk out of plumb in two seasons. We set terminals deeper and bell the concrete for exactly that reason. Wind matters too: a chain link run is a sail, so tension, tie-offs, and post weight carry the fence through a North Texas gust front.
Serving McKinney, TX – Our Local Coverage Area
We serve McKinney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in McKinney

Most residential chain link fences in McKinney are finished in one to three days once materials are on site. A standard quarter-acre lot with one gate is typically a two-day job: dig and set posts day one, cure overnight, rails and fabric day two. Acreage runs with multiple terminals and a drive gate can stretch to three days or more. Call (888) 343-9048 for a date estimate on your specific lot.
McKinney generally requires a fence permit for new installations, and height limits kick in faster on corner lots and front yards. Most residential rear and side fences at 6 feet pass, but front-yard and corner-line rules are where people get caught. We handle the permit paperwork and confirm the limits for your address before we order a single post. That’s part of the free estimate, not an extra.
Yes. A chain link fence is a standalone perimeter build, so nothing in your home gets opened, no plumbing or electrical moves, and the house stays untouched. We do mark and hand-dig around known irrigation and pool lines. The main disruption is digging near the line and crossing the yard to haul materials.
Workmanship on your McKinney chain link fence is covered by our 730-Day Done Right Promise. If a post goes out of plumb, a gate sags, or a tension run loosens from the install, we make it right. Manufacturer coverage on fabric and coating applies separately, and we’ll tell you what that covers in plain language.
Yes, and it often is. Chain link is a frequent phase one on acreage work, where a property line gets marked and secured before anything else goes up. When the job widens to a different fence style or a full perimeter plan, that’s Fence Installation in McKinney, and our Fence Installation service covers the seasonal calendar for North Texas. If you’re adding a dwelling or outbuilding behind the line, homeowners often pair this with ADU Site Prep & Utilities in McKinney, and we cover all of McKinney and the nearby towns of Melissa, Allen, Princeton, and Fairview.
Get a Written Chain Link Fence Estimate in McKinney
Tell us the footage or just the lot shape and we’ll come walk it. On the call you’ll get a live person, 24/7, and we’ll set a time to measure. The estimate is free, written line by line, and includes permit guidance. Financing runs at 0% for 18 months, and projects over $10,000 take $1,000 off. Call Groundwork Construction Co. at (888) 343-9048.
Written by the team at Groundwork Construction Co.












