







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Anna, TX: What It Takes and What It Costs
A chain link fence in Anna, TX typically runs $3,500 – $9,000 for a standard residential yard, and most jobs are finished in one to three days once materials land. That range covers removal of old fencing, post setting, and gates on a normal subdivision lot. It climbs on large acreage, steep grade, or rock-heavy digging. Call (888) 343-9048 for a free on-site estimate and a written line-item quote.
Key takeaways:
- Most Anna chain link jobs finish in 1 – 3 days on site, plus a short permit window where required.
- Price is driven by linear footage, height, gauge, gate count, and what’s underground.
- On new-build Anna lots, grading and fresh fill dirt matter as much as the fence itself.
- Every project is covered by our 730-Day Done Right Promise.
How We Build a Chain Link Fence in Anna, From Layout to Last Tension Band

The real sequence isn’t complicated, but the order matters, especially on Anna lots where the ground is newer and less settled than it looks. Here’s what actually happens.
Stage 1: Site walk and layout (same visit as your estimate, or a second 30 – 45 minute trip)
We walk the property line with you, confirm where the fence goes, and flag anything that changes the plan: a shared line with a neighbor, a utility easement, a drainage swale, or a slope that needs stepped panels instead of a straight run. On newer Anna lots we look hard at how the yard drains, because a fence set in a low spot or across a swale will pond water and heave. You decide the exact line and gate positions here. Getting this right at the start is what keeps the job from stalling later.
Stage 2: Permits and utility locates (2 – 10 business days, depending on scope)
Most residential chain link in Anna that stays under the town’s height and setback thresholds doesn’t require a full building permit, but we confirm before we dig. We call 811 for utility locates on every job without exception; that’s a free service and it’s non-negotiable. On larger runs or corner lots with right-of-way concerns, we pull what’s needed and schedule the inspection. You don’t have to chase any of this.
Stage 3: Demo and prep (half a day to a full day)
If there’s an old fence, it comes out: posts pulled or cut, concrete broken out, debris hauled off. Then we clear the line of roots, rock, and leftover construction spoil, and grade the corridor so posts sit on consistent ground. On the newest Anna tracts, fill dirt and builder leftovers are common, so we probe before setting anything.
Stage 4: Posts, rails, and mesh (one to two days)
Posts get set in concrete to depth based on height and soil, plumb and on line, and cured before the top rail and mesh go up. Standard residential is 4-foot; 5-foot and 6-foot are common for pets and privacy screening. Tension bands, brace bands, and a bottom tension wire finish the run. Gate posts get extra concrete because they carry the load of every swing.
Stage 5: Gates, walkthrough, and cleanup (same day)
Gates get hung, latched, and checked for swing and sag, then we walk the whole line with you, pull any slack, and haul off every scrap. You sign off on the finished fence, and the 730-Day Done Right Promise kicks in from there.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before We Dig
Chain link isn’t one product. The decisions below are the ones that actually change how the fence feels, how long it lasts, and what it costs.
- Height (4, 5, or 6 feet): 4-foot keeps cost down and works for boundary marking; 5-foot is the sweet spot for dogs; 6-foot is the go-to for privacy screening with slats and adds material and post size.
- Wire gauge: 11.5-gauge is the residential standard and holds up well; 9-gauge is heavier and worth it on runs where kids or dogs regularly hit the fence, at a higher material cost.
- Mesh size: 2-inch mesh is standard; 1⅝-inch or 1-inch tightens the gaps for small dogs.
- Coating: Galvanized is the baseline; vinyl-coated (black or green) costs more but blends into landscaping and resists the North Texas sun better over time.
- Top rail and framework: A top rail with line posts on standard spacing keeps the fence from sagging; heavier framework on long runs and gate posts prevents the droop that cheap installs develop.
- Gates: Walk gates, double drive gates, and self-closing hardware for pool-adjacent areas. Each gate adds cost and needs a properly set post.
- Privacy options: Fence slats or windscreen add privacy without a solid fence. Homeowners often pair this with a Door Installation in Anna if they’re already updating the exterior.
What Chain Link Fence Costs in Anna, TX

Plan on $3,500 – $9,000 for a standard residential chain link fence in Anna, with most single-family yards landing in the $4,000 – $6,500 band. Here’s what pushes a job toward the low or high end.
| Line item | Typical range |
|---|---|
| Standard 4 – 5 foot chain link, per linear foot installed | $18 – $30 |
| 6-foot with vinyl coating and privacy slats | $28 – $45 per foot |
| Walk gate (3 – 4 foot) | $250 – $600 |
| Double drive gate (10 – 12 foot) | $700 – $1,800 |
| Old fence removal and haul-off | $300 – $900 |
What moves the number:
- Linear footage: the single biggest driver. A half-acre yard runs far less than a full acre.
- Site conditions: rock, caliche, tree roots, or slope that requires stepped panels and extra posts.
- Height and gauge: 6-foot 9-gauge costs meaningfully more than 4-foot 11.5-gauge in both material and labor.
- Gate count and size: every gate adds concrete, hardware, and set time.
- Coating and privacy add-ons: vinyl coating and slats push the per-foot number up.
Every written estimate is line-itemed: footage, height, gauge, gates, demo, locates, and any permit cost, so you see where the money goes. Upfront pricing means the number you see is the number you pay. No surprise add-ons mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Anna Homes Specifically Do to This Job
Anna is one of the fastest-growing exurban boomtowns on US-75 north of McKinney, and that shapes fence work here more than anything else. Most of what we install goes up on slab-on-grade single-family homes in the newer master-planned tracts, on ground that was blackland farmland a few years ago. The new lots carry fresh fill dirt and immature drainage, and Anna’s blackland clay expands and contracts hard with every wet-dry cycle. That combination means we routinely see yard ponding and grading problems within the first few years of a build, and a fence set without regard for those low spots will heave, lean, or rust at the base before it should. Around the older 1990s – 2000s starter subdivisions near the town core, the ground is more settled, and the job is more about replacing aging fence and correcting old set lines. Either way, Annie’s summer heat and UV take a toll on galvanized wire and especially on cheaper coatings. Homeowners planning a larger yard project often pair fencing with ADU Site Prep & Utilities in Anna, since both hinge on getting the grading and utility locates right the first time.
Serving Anna, TX – Our Local Coverage Area
We serve Anna and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Anna

Most residential chain link fences in Anna are finished in one to three days on site, with a short permit window added when one applies. Large acreage, steep grade, or heavy demo pushes the on-site work toward the three-day end. Call (888) 343-9048 for a timeline on your specific lot.
Most residential chain link installs in Anna that stay within the town’s height and setback thresholds don’t need a full building permit, but we confirm before we dig. Utility locates through 811 are done on every job. We handle the permit scope and any inspection when it applies, so you’re covered.
In most cases, yes: we work around existing landscaping, patios, and irrigation lines, and we always call for utility locates before setting posts. On Anna lots with buried plumbing or electrical near the line, we adjust post placement rather than disturb it. Every estimate states exactly what we’ll work around.
Most Anna chain link fence projects land between $3,500 and $9,000, depending on footage, height, gauge, gates, and site conditions. A standard 4-foot boundary fence on a typical lot sits in the middle of that range. Call (888) 343-9048 for an exact quote; estimates are free and the pricing is upfront.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. It covers our installation, not damage from storms, vehicles, or misuse.
Get a Free Chain Link Fence Estimate in Anna
Call (888) 343-9048 to schedule a free on-site estimate for your chain link fence in Anna, TX. A live person answers 24/7, and we’ll walk the line with you, talk through height, gauge, gates, and coating, and hand you a written line-item quote with no surprises. This is part of a larger yard or home project? See Fence Installation in Anna or our broader Fence Installation service, and check what we cover across Anna. 0% financing for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.












