







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Cost in Allen, TX: What’s Behind the Wall Drives the Price
A walk-in shower installation in Allen, TX typically runs $4,500 to $12,000, and a full bathroom remodel that includes one falls in the $9,000 to $28,000 range. But most online calculators miss the real cost variable in Allen: what’s hiding behind your existing shower wall. In the 1990s subdivision homes that make up most of this city, that answer is often rotted backer board, undersized drain lines, or first-generation CPVC plumbing. Call (888) 343-9048 for an upfront, itemized estimate before any demo begins.
We’re Groundwork Construction Co. of Allen. Our technicians have up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise. That matters more than usual on a shower, where the failures that show up 14 months later – grout cracking along the pan, membrane wicking, door seal leaks – are the exact callbacks most contractors bill you for as new service calls.

Why Allen Showers Cost More Than the Advertised Price
Allen is a Collin County master-planned suburb that was largely built out in a single 1990s-2000s growth wave. That means the work here isn’t old-house repair; it’s second-generation renovation of 20- to 30-year-old subdivisions. The subdivisions themselves – Watters Crossing, Twin Creeks, Bethany Ridge – were built fast, to builder-grade standards, with plumbing that was fine for the fixtures of the day and is now at the edge of its service life.
What that looks like when we open up a shower in one of these homes:
- The wet wall is usually compromised. Twenty-five years of North Texas humidity and daily showers means the original backer board behind the tile often crumbles on removal. It’s not visible on any inspection until the demo starts.
- CPVC plumbing gets brittle. Late-1990s Allen builds commonly used CPVC supply lines, which harden with age and can crack rather than re-thread when a new valve or shower-head configuration gets tied in. A reputable installer checks plumbing condition before quoting fixtures, not after demo.
- Drain relocation means concrete cutting. These homes sit on slab-on-grade foundations. Shifting from a tub-to-shower conversion, or widening an existing stall, usually means moving the drain – which requires cutting the slab. Budget $400 to $800 on top of the base project cost for that alone.
None of this is a scare tactic; it’s just what a 25-year-old shower looks like from the inside. It’s why we quote from an inspection, not a catalog.
Walk-In Shower Cost Breakdown for Allen Homeowners
Here are the ranges Allen homeowners see from us, itemized. You’ll notice plumbing, waterproofing membrane, tile, and labor are separate lines – not one lump sum that hides the surprises.
| Line Item | Cost Range |
|---|---|
| Walk-in shower installation (full replacement) | $4,500 - $12,000 |
| Tub-to-shower conversion | $3,500 - $10,000 |
| Shower replacement (like-for-like footprint) | $3,000 - $8,500 |
| Drain relocation (slab cutting, if needed) | $400 - $800 added |
| Bathroom remodel including walk-in shower | $9,000 - $28,000 |
| Small bathroom remodel | $5,000 - $12,000 |
| Bathroom vanity installation | $800 - $3,000 |
The spread inside each range comes down to three things: tile selection (porcelain reads cheaper than large-format natural stone and installs faster), whether the drain moves, and whether the existing plumbing survives the demo or needs replacement. A straightforward walk-in shower replacement in a Watters Crossing home with intact plumbing lands near the bottom of the range. A tub-to-shower conversion in a Twin Creeks home with brittle CPVC, a slab cut, and a full wet-wall rebuild lands near the top.
We also offer 0% financing for 18 months and $1,000 off projects over $10,000. On a job in this range, that combination moves a lot of Allen homeowners from “someday” to scheduled.

What the Permit Process Actually Requires in Allen
Allen’s permitting and inspections are stricter than neighboring McKinney and Frisco’s newer edges, and the city requires a building permit for shower remodels that relocate plumbing or expand the wet area. This is not optional paperwork. Unpermitted work surfaces when a buyer’s inspector flags it during a home sale, and the fix is usually a retroactive permit plus whatever the city requires to bring the work up to current code – a headache and a cost that lands on you, not the contractor who skipped it.
We pull the permit before the first tile comes off the wall. Roof color, fence height and shed placement in these HOA subdivisions also require architectural-review pre-approval before the city issues a permit – a step crews from out of town routinely skip. Our background-checked, uniformed technicians know the local review process because we work in it every week.
Common Local Scenarios and What They Run
Scenario 1: Tub-to-shower conversion in a 1997 Twin Creeks home
The tub comes out, the drain moves to a linear shower drain, the wet wall gets rebuilt with modern waterproofing membrane, and the new tile goes up. If the CPVC survives, this sits around $3,500 to $10,000. If it doesn’t, add the plumbing line item.
Scenario 2: Full walk-in shower upgrade in a Bethany Ridge home
Same footprint, but the backer board is shot, the tile is being replaced, and a bench and niche are being added. Typically $4,500 to $12,000.
Scenario 3: Walk-in shower as part of a full bath remodel
The shower, vanity, flooring and lighting all get touched. Expect the full bathroom range of $9,000 to $28,000. See our Bathroom Remodeling page for the scope of a full tub-to-shower conversion done right, or Bathroom Remodeling in Allen for the local version.
Brands and Materials We Bring to the Table
Tile and fixtures aren’t the whole job, but they matter. We work with a curated set of verified brand partners so you’re choosing quality, not just what’s in stock. For showers, that means Kohler fixtures and finishes built to last; for the surrounding bath, it can include a tamko or boral product line where the project scope calls for exterior tie-ins, or PGT and CGI window and door options when the remodel includes replacing a bathroom window for light and ventilation. Our material partners span every trade, so you’re not stuck with one brand forced into every room.
Why Groundwork for a Walk-In Shower in Allen?
We’ve been in business since 2014, and our technicians have up to 12 years of experience – enough to know what a 1990s Allen shower looks like before the tile comes off, and to price it accurately the first time. Calls are answered by a live person 24/7, so you’re never waiting until Monday on a scheduling question or a quote follow-up. Our upfront pricing means the number you see is the number you pay, and our 730-Day Done Right Promise covers the failures that show up after the job – grout cracking, membrane issues, door seal leaks – without a new service call charge.
Ready for an itemized estimate? Start with our home page or call us directly.
FAQs
A walk-in shower installation in Allen runs $4,500 to $12,000, with a full bathroom remodel including a walk-in shower in the $9,000 to $28,000 range. The final number depends on whether the drain relocates, whether the existing plumbing and backer board survive demo, and your tile selection. Call (888) 343-9048 for an exact quote – estimates are free.
It depends on what’s failed. If the issue is tile or grout only, repair runs far less than replacement. If it’s the waterproofing membrane or the backer board behind the tile, replacement is usually the only durable fix – patching a failed membrane just delays the call. We’ll tell you honestly which one you’re looking at after an inspection, and the number we quote is the number you pay.
Yes. Allen homes sit on slab-on-grade foundations, so relocating a drain means cutting concrete – typically a $400 to $800 addition to the base project cost. It’s a standard part of a tub-to-shower conversion, and we handle the concrete work and the permit. Call (888) 343-9048 to schedule an inspection.
Most walk-in shower installations in Allen finish in 5 to 10 working days once materials arrive, depending on whether drain relocation or a full wet-wall rebuild is involved. Permit review time with the city can add a week or two on the front end. We give you a realistic schedule upfront – not an optimistic one that slips.
Get Your Walk-In Shower Priced Right
Most cost guides stop at tile and fixtures. We start where the cost actually lives: behind the wall, under the slab, inside the plumbing. Call (888) 343-9048 for a free estimate and design consult. Same-day scheduling is often available, and every project is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Allen, serving Allen, TX.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












