







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Murphy, TX: What the Job Really Costs and Takes
Most cabinet and countertop projects in Murphy land between $14,000 and $45,000, depending on whether you’re refacing or replacing, and what stone you pick. A straight cabinet swap with laminate in a standard 1990s kitchen runs closer to the bottom of that range, while full replacement in KraftMaid cabinetry with Cambria quartz tops and an island sits near the top. The whole job, cabinet removal through countertop template and install, usually takes 3 to 6 weeks from order to final walkthrough. Call (888) 343-9048 and we’ll price yours.
How our cabinets & countertops process actually runs, day by day

We don’t hand you a schedule and disappear. Here’s the real sequence, because knowing when you’ll lose your kitchen matters more than a glossy brochure.
Stage 1: Measure and design lock (week 1)
We measure every wall, note where plumbing and electrical sit behind the existing boxes, and lock the layout. You decide cabinet door style, finish, and whether the sink stays put or moves. Moving a sink or range means relocating a supply line, drain, or 240V circuit, which adds cost and a plumbing/electrical sub. This is the decision that most changes your number.
Stage 2: Order and lead time (weeks 1 to 4)
Cabinet orders run 3 to 5 weeks on most lines. While you wait, we confirm countertop slab selection and schedule the template. You’ll pick your slab, edge profile, and backsplash height now. Slab availability drives the timeline here more than anything else.
Stage 3: Demo and prep (day 1, one to two days)
Old cabinets and counters come out. We protect floors, cap the plumbing, and check the wall behind. On Murphy homes from the 1980s and 1990s, that’s often where we find water staining or a backer board that needs replacing before new boxes go in.
Stage 4: Cabinet install and countertop template (days 2 to 4)
New cabinet boxes go in level and shimmed, doors and drawers hung, then the countertop fabricator templates the in-place cabinets. Template to install is typically 5 to 10 business days for stone, faster for laminate or solid surface, because stone is cut to your exact measurements and can’t be adjusted on site.
Stage 5: Countertop set and finish (final day)
The fabricator sets the slab, cuts the sink and faucet openings, and we install the faucet, connect the plumbing, and do the final walkthrough. You get the full punch list before we invoice, so nothing’s left dangling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
This is where the job stops feeling like a checklist and starts feeling like your kitchen. Each choice trades money against durability and how long you’ll be happy with it.
- Cabinet boxes: stock vs. semi-custom vs. full custom. Stock is fastest and cheapest but limited to standard sizes. Semi-custom, like the KraftMaid line, lets you tweak depth and height for a fraction of full custom. Custom gives exact millwork at the highest price and longest lead time.
- Refacing vs. replacement. Refacing keeps your existing boxes and swaps doors and veneer, cutting cost and dust but only making sense if the boxes are solid and the layout already works.
- Countertop material. Quartz (Cambria and similar) is non-porous and low-maintenance but the priciest per square foot. Granite offers natural variation and slightly lower cost but needs periodic sealing. Laminate is the budget pick and best on a tight timeline; solid surface sits in the middle and can be sanded out if scratched.
- Sink and faucet. Undermount sinks and a solid faucet from Moen or Delta hold up far better than builder-grade. Decide the sink before the countertop template, because the cutout is measured to it.
- Edge profile and backsplash height. A standard ease edge costs nothing extra; a mitered or beveled edge runs higher per linear foot. A full-height stone backsplash looks sharp but adds slab cost.
What Cabinets & Countertops costs in Murphy, TX

For the Murphy market, plan on $14,000 to $45,000 for a full cabinet and countertop project, or $4,000 to $13,000 for cabinets alone and $2,000 to $6,500 for the countertops. Those are honest, market-calibrated numbers, not teaser rates. Call (888) 343-9048 and we’ll put an exact figure on your kitchen.
Five variables move that number to the top or bottom of the range:
- Kitchen size and cabinet count. A galley doubling to 25 linear feet of cabinetry costs far more than an L-shape at 15 feet.
- Layout changes. Moving a sink, range, or island triggers plumbing and electrical work, adding a few thousand and inspection time.
- Material grade. Laminate and stock boxes at the low end, Cambria quartz and semi-custom at the high end.
- Existing condition. Water damage or out-of-square walls need prep before install.
- Permit scope. A straight swap usually needs no permit; plumbing or electrical relocation does, and that adds cost and a scheduled inspection.
Our written estimate is line-itemed: cabinets, countertops, demolition, install labor, and any subs. It lists what’s included and what typically isn’t, like appliance relocation or drywall repair behind old cabinets, so nobody’s surprised mid-job. Pricing is upfront and fixed. No change orders.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy homes specifically do to this job
Murphy is essentially built out. That changes this job in ways a fast-growing exurb wouldn’t show you. Most of the kitchens we open here sit on lots platted from the 1980s through the 2000s, in established subdivisions rather than fresh lots. So we’re rarely working in a brand-new shell; we’re working inside original cabinet boxes from that era, often the builder-grade oak or thermofoil that has aged past its service life.
The tight permitting environment matters too. Residential work in the 75094 ZIP runs through a small-town inspection process rather than a big city development department, so cabinet swaps that leave plumbing and electrical in place usually move fast, while relocations need a scheduled inspection before walls close. HOA and plat rules on already-developed streets can also shape your reconfiguration, and North Texas clay soil is a real factor: an out-of-level slab shows up when new cabinets don’t sit flush, so we shim and level carefully. If the project grows into structural or layout work, homeowners often pair this with our Kitchen Remodeling in Murphy service. For a wider scope, see the Kitchen Remodeling hub, and if you’re eyeing a full Murphy overhaul, we cover it. Some also pair cabinetry work with a Garage Conversion ADU in Murphy or a New Detached ADU in Murphy to make the most of an infill lot.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Murphy

Plan on 3 to 6 weeks end to end, with the in-home work taking most of a week. Cabinet lead time (3 to 5 weeks) and stone fabrication (5 to 10 days after template) eat the calendar, not the install itself. Call (888) 343-9048 to get a schedule built around your order.
Usually not for a straight cabinet and countertop swap. A permit is typically required only when plumbing, gas, or electrical needs to be relocated. We handle the filing and inspections and tell you upfront if your job crosses that line. Call (888) 343-9048 and we’ll confirm for your layout.
Yes, and it’s the most common and most cost-efficient path. Keeping the sink and range where they are avoids plumbing and electrical relocations, which keeps you at the lower end of the $14,000 to $45,000 range. Call (888) 343-9048 to price a like-for-like swap.
Full projects run $14,000 to $45,000, with cabinets $4,000 to $13,000 and countertops $2,000 to $6,500 on their own. Material grade and layout changes drive the spread. Call (888) 343-9048 for an exact, upfront quote that’s fixed before work starts.
Every project is covered by our 730-Day Done Right Promise, and manufacturers back their cabinetry and slab warranties separately. All technicians are background-checked and arrive in uniform, and our calls are answered by a live person 24/7. Call (888) 343-9048 to start.
Get your cabinets & countertops priced in Murphy
Call (888) 343-9048 to schedule a free on-site estimate for cabinets & countertops in Murphy. On the call you’ll get straightforward answers, book a visit, and leave with an itemized, fixed quote. No vague bids, no pressure. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available. Most jobs take a few weeks; the right one is worth the wait.
Written by the team at Groundwork Construction Co.












