







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Allen, TX: What the Job Actually Involves
Door Installation in Allen, TX runs $450 to $2,200 per door installed, depending on whether you’re hanging an interior slab in a 1990s Watters Crossing bedroom or replacing a failing exterior entry system on a brick-veneer two-story. A single interior door is a same-day job; an exterior entry with frame repair, new hardware and paint usually takes two to three days once the door is on site. Call (888) 343-9048 for a free on-site estimate and we’ll measure, check the rough opening and put a written number in your hands.
How our Allen door installations run, stage by stage

Door work looks simple from the driveway and gets complicated fast once the old unit comes out. Here’s the sequence we follow on an Allen install so you know what to expect and when we need a decision from you.
Stage 1: Measure and pre-check (day of estimate, about 45 minutes)
We measure the rough opening, check the wall for plumb and square, and confirm the framing behind the trim is sound. In 1990s and 2000s Allen subdivisions, we routinely find the original rough openings out of square by a quarter inch or more, which changes what shimming and trim work the job needs. You decide interior versus exterior scope here.
Stage 2: Demo and prep (2 to 4 hours)
The old door, casing and any rotted threshold or jamb come out. We inspect the sill pan and framing. On east and west-facing exterior doors in Allen, sun exposure dries and cracks the original builder-grade thresholds, so we often find soft wood that has to be replaced before the new unit goes in. This is the stage where surprises live, and we flag them before proceeding.
Stage 3: Set and shim (3 to 5 hours)
The new door goes into the opening, gets shimmed plumb and level, and is anchored. Exterior units get flashed and sealed at the sill, jambs and head. Interior slabs get hung on their hinges and checked for swing and latch alignment.
Stage 4: Hardware and trim (2 to 4 hours)
Handlesets, deadbolts, hinges, weatherstripping and casing go on. You choose the hardware finish and trim profile here; we carry common profiles but specialty casing may add a day for delivery.
Stage 5: Finish and walkthrough (1 to 3 hours)
Paint touch-up, sealant cure check, and a walkthrough where we demonstrate the swing, latch and lock. Total project time for a single door is typically one to two days; multiple doors in one visit keep it efficient.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Every door decision comes down to material, core and hardware, and each one carries a real trade-off. Here’s what we walk Allen homeowners through.
- Fiberglass exterior doors: The strongest fit for North Texas. They resist the summer heat and hail better than wood, hold paint well, and won’t swell with humidity. Higher upfront cost, but the lowest long-term maintenance. This is what we recommend for most Allen front entries.
- Steel exterior doors: Solid security and a lower price point, but dents show and they can rust at the bottom edge if the threshold seal fails. Good for back or side entries where you don’t need a showpiece.
- Wood exterior doors: Beautiful, and a poor match for a sun-baked, hail-prone climate unless you’re committed to refinishing every couple of years. We install them when the look matters more than the upkeep.
- Solid-core interior doors: Quieter, heavier feel, better for bedrooms and home offices. The trade-off is cost and weight on older hinges.
- Hollow-core interior doors: The budget choice for closets and second bedrooms. Light, cheap, and noticeably less solid in the hand.
- Hardware and finish: Satin nickel, matte black and bronze are the common picks. Quality hinges and a proper deadbolt matter more than the finish for longevity.
For patio and sliding units, that work sits with our Windows & Doors service, and when the door is one piece of a bigger exterior refresh, it folds into the full Windows & Doors in Allen scope.
What Door Installation costs in Allen, TX

Expect $450 to $2,200 per door installed, with most single interior doors landing near the bottom and exterior entries at the top. Here’s what moves the number:
| Item | Typical range |
|---|---|
| Interior door, hollow-core, standard size | $450 – $850 |
| Interior door, solid-core | $650 – $1,200 |
| Exterior entry door, fiberglass or steel | $1,200 – $2,200 |
| Hardware and lockset upgrade | $150 – $500 |
| Jamb or threshold repair | $200 – $600 |
The variables that push a job toward the high end: door size and material, the condition of the existing frame and sill, whether the opening has to be reframed, hardware grade, and whether a permit is required for an exterior structural change. Our written estimate lists line items and excludes only what we can’t see until demo. Upfront pricing, no surprises: if we find rot behind the casing, we show you before we touch it.
See the difference
Before
After
Before
After
Before
AfterWhy Allen homes make this job different
Allen is a Collin County master-planned suburb largely built out in a single 1990s – 2000s growth wave, so the doors we pull here are usually original builder-grade units that have hit the end of their service life rather than antique hardware from a century-old house. That changes the work. The doors are 25 to 30 years old, the thresholds have dried and cracked under our summers, and the surrounding casing often needs replacement along with the door. HOA architectural review adds a step in neighborhoods like Watters Crossing, Twin Creeks and Bethany Ridge: even a like-for-like door swap can require pre-approval on color and style before a city permit is issued if the change is visible from the street. Allen’s permitting and inspections are strict compared to nearby McKinney’s newer edges, so we build that review into the schedule rather than discovering it mid-job. We cover the entire city, from these HOA subdivisions to the newer builds near the eastern edge, and we know the local inspection rhythm. Homeowners here often pair a door refresh with Cabinets & Countertops in Allen during a coordinated interior push, or plan a full Garage Conversion ADU in Allen that adds a door of its own.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Door Installation in Allen

One door typically takes a day to two days, and a full house of interior doors can be done in a single visit. Exterior entries with frame or threshold repair run longer. Call (888) 343-9048 for a timeline on your specific doors; estimates are free.
A like-for-like swap usually doesn’t need a permit, but any change to the opening’s size or structure, or a visible exterior change in an HOA subdivision, can trigger one. We handle the permit and inspection, and we confirm the HOA review requirement up front. Call us to sort out what your project needs.
Yes, most replacements go in the existing opening with no structural or plumbing change. Only when the opening is out of square or the framing is rotted do we need to touch structure, and we flag that at the estimate stage.
Most jobs land between $450 and $2,200 per door, with interior doors at the low end and exterior entries at the high end. Call (888) 343-9048 for an exact quote; estimates are free.
Every install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. Call for the written terms.
Ready for a free Door Installation estimate in Allen?
Call (888) 343-9048 to schedule your free on-site estimate for Door Installation in Allen. We’ll measure the openings, check the framing and HOA review requirements, and hand you a written line-item price with no surprises. A live person answers the phone around the clock. Our technicians bring up to 12 years of experience to every job across Allen.
Written by the team at Groundwork Construction Co.












