







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Fairview, TX: What the Job Actually Involves
A cabinet and countertop replacement in Fairview, TX typically runs $14,000 – $45,000 for the full package, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500 on their own. Most of these jobs take three to four weeks from demo to final caulk, and the schedule hinges on countertop templating, not on the install itself. Call (888) 343-9048 for a free on-site estimate, and we’ll walk your kitchen and put real numbers in front of you.
We’re Groundwork Construction Co., and Cabinets & Countertops is one of the few jobs where the client’s taste and the builder’s tolerance for detail have to meet in the middle. They usually do.
How we run a cabinet and countertop job, stage by stage

Here’s the real sequence, so you know what day one looks like and what you’ll be deciding when.
1. Site walk and measurements (day 1)
We measure every wall, check plumb and level, and note where the existing cabinets meet out-of-square drywall, which is common in older Fairview estates. You’ll make your first big decision here: full replacement or refacing, and whether the layout changes. Out of this comes a written line-item quote.
2. Decisions and ordering (weeks 1 – 3)
You pick door style, finish, box construction, and countertop material. Semi-custom cabinets from a line like KraftMaid run longer on lead time than stock boxes but let you match a plank floor you’re not replacing. This is where most of the calendar actually goes. We order cabinets, confirm countertop slab availability, and lock your install date.
3. Demo and prep (days 1 – 2 on site)
We pull old cabinets and countertops, protect the floor, and inspect what’s underneath. Rotted subfloor, outdated outlets, or a shutoff that won’t close all get flagged with a written change order before anyone touches a screwdriver. No surprises tacked on later.
4. Cabinet install and template (days 2 – 3)
Cabinets go in, get shimmed, leveled, and set against the wall. Countertops can’t be fabricated until they’re in, because every inch depends on the box below it. We template the day after cabinets sit, and fabrication runs seven to ten days at most stone shops.
5. Countertop set, backsplash, and walkthrough (days 10 – 14, roughly)
The slab sets, seams get filled, and we finish the edge profile and any cutout for the sink and cooktop. A short backsplash can go in the same day. Final walkthrough happens after hardware and caulk cure, with the 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
The options here come down to what the room can carry, what you want it to look like in ten years, and what your budget tolerates.
- Cabinet box construction. Plywood boxes hold hardware better and tolerate humidity swings; particleboard saves money but can swell. For a Fairview estate kitchen, plywood is almost always worth the spread.
- Door material. Painted MDF gives crisp, uniform color; solid wood doors take stain and age gracefully. Painted MDF is easier to keep looking new, solid wood is easier to refinish.
- Refacing vs. full replacement. Refacing keeps the boxes and replaces doors and veneer, coming in well under a full replacement. It only makes sense if the layout and boxes are sound.
- Countertop material. Quartz and granite are the standards here; quartz needs zero sealing, granite handles heat better. Soapstone and butcher block suit specific looks but carry real maintenance.
- Edge profiles and sink cutouts. A simple eased edge is barely a line item; a thick mitered edge or a farmhouse sink cutout adds cost and time. Worth knowing before you fall in love with a photo.
What Cabinets & Countertops costs in Fairview, TX

Full cabinet and countertop replacement in Fairview runs $14,000 – $45,000. A small or partial kitchen can land at $9,000 – $20,000. Cabinet installation alone is $4,000 – $13,000, and countertop installation is $2,000 – $6,500. Backsplash is $800 – $2,500 and a new island is $3,000 – $10,000.
What pushes a job to the top of that range:
- Layout changes. Moving a sink, range, or outlet means plumbing and electrical work, and sometimes a permit. Same layout, same price band.
- Material grade. Stock boxes and laminate live at the bottom; semi-custom plywood boxes with quartz live near the top.
- Cabinet run length. A 15-foot galley and a 30-foot custom kitchen aren’t the same job, even with identical finishes.
- Condition underneath. Wet subfloor, old shutoffs, or a floor that needs leveling before the boxes sit.
- Permit scope. Structural or plumbing changes pull permits and add inspection stages; a straight replacement usually doesn’t.
Every written estimate from us includes demo, cabinet and countertop material, install labor, and haul-off. It usually excludes appliances, plumbing fixture replacements beyond the sink, and any unexpected structural repair we haven’t seen yet. Those get priced in writing before work moves forward, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview homes specifically do to this job
Fairview’s housing stock is largely large custom homes on acre or larger lots, built from the 1990s into the 2010s, and the kitchen is usually where the house made its first big statement. That means matching existing high-end finishes is the whole game. Tearing out a 1998 custom kitchen and replacing it with a 2026 one is a design problem as much as a build problem, and matching door profiles, stain tones, and trim against the adjacent rooms is the work we spend the most time on.
New construction and rebuilds here also work around mature oaks and pecans, and that spills into kitchen remodels: window walls that weren’t there in Allen’s newer cleared subdivisions mean more cabinets flanking a view, and more care staging materials without crushing roots. Foundation movement from North Texas blackland clay is the other factor; we check floor level in every kitchen before we set cabinets, because a floor that’s out of level will show up as a crooked countertop seam within the year. Permits for Fairview go through the town’s building department and stay with the project, so cabinet jobs with plumbing or structural changes pull a permit and get inspected before the countertop sets. Everything else in Fairview is fair game for a straight replacement with no permit at all. If the wider scope comes up, our Kitchen Remodeling in Fairview page covers the full picture, and homeowners often pair this job with a Garage Conversion ADU in Fairview or a New Detached ADU in Fairview when the kitchen opens up a new wing of the house.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Fairview

Most jobs take three to four weeks from demo to walkthrough, with most of that time spent waiting on countertop fabrication and cabinet lead times rather than install days on site. A same-layout replacement with stock cabinets can finish in two weeks; custom cabinets and a slab that needs to be ordered take closer to five. Call (888) 343-9048 and we’ll tell you your realistic window.
A straight replacement with no layout change usually doesn’t require a permit; moving plumbing, gas, or walls does. Fairview’s building department will want to see the permit and inspect the work before the countertop goes on. We pull the permits when they’re needed and walk the inspections. Call (888) 343-9048 to find out which applies to your job.
Yes, and it’s the cleanest path. Keeping the sink, range, and outlets where they are eliminates plumbing and electrical relocation, keeps the price near the middle of the range, and shortens the schedule. It also makes a refacing estimate more realistic. Call (888) 343-9048 and we’ll tell you whether your existing layout supports that approach.
Full replacement runs $14,000 – $45,000 depending on cabinet grade, countertop material, cabinet run length, and any plumbing or structural changes. Cabinet-only installation is $4,000 – $13,000, countertop-only installation is $2,000 – $6,500, and backsplash adds $800 – $2,500. Call (888) 343-9048 for an exact quote; estimates are free.
Every install is covered by the 730-Day Done Right Promise, and the countertop and cabinet manufactures carry their own material warranties. If a cabinet door sags, a drawer loses alignment, or a seam opens up within two years, we come back and fix it. Call (888) 343-9048 with the details and we’ll schedule a return visit.
Get a free estimate for Cabinets & Countertops in Fairview
Call (888) 343-9048 for a free on-site estimate. We’ll measure the kitchen, walk through cabinet and countertop options with you, and leave you with a written line-item quote plus any financing and discount offers that fit. Our technicians have up to 12 years of experience, calls are answered by a live person, and the price you see is the price you pay. Our kitchen remodeling service covers the rest of the room when you’re ready for it.
Written by the team at Groundwork Construction Co.












