







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Garland, TX: What It Costs and What It Takes
Concrete Driveways & Concrete Work in Garland runs $4,500 – $12,000 for a full installation, with driveway replacement at $5,000 – $14,000 when the old slab and base both have to come out. Most residential pours take 3 – 7 days from demo to the day you can park on it again, depending on weather and whether a permit is required. Call (888) 343-9048 for a free on-site estimate with line-item written pricing.
How Concrete Driveways & Concrete Work Get Done Here, Step by Step

Concrete is unforgiving. The finish you see on day one is the easy part; the work that determines whether the slab is still flat and crack-free after five North Texas summers happens before a single yard of mud shows up. Here’s the real sequence we run on a Garland job.
Stage 1: Site check and layout (day 1)
We walk the existing drive, measure width and slope, and check where the downspouts, gas meter, and water main sit. On Garland’s aging slabs we also look for root intrusion from the big pecans and live oaks that shade a lot of the older lots. You decide the driveway width and whether the apron flares. This stage takes a couple of hours, not a couple of days.
Stage 2: Demo and haul-off (day 1 – 2)
A typical single-car Garland drive is roughly 400 – 600 square feet and comes out in a day with a breaker and skid steer. Double drives and anything with a heavy base run into a second day. You’ll see the base for the first time here. If it’s blackland clay with no gravel, that’s a real conversation, because we won’t pour over it.
Stage 3: Base prep and forming (day 2 – 3)
This is the stage that separates a driveway that lasts from one that heaves. We grade for drainage away from the garage, compact a flexible base, and form the slab. Expansion joints go in against the garage slab and any walkway it ties into. We usually add a bar or mesh and thicker edges where the drive meets the street. What you decide here: whether you want the driveway widened, and whether a walkway gets poured at the same time. It’s cheaper now than later, and this is where Driveway & Pavers options come up if you’re weighing concrete against pavers.
Stage 4: Pour and finish (day 3 – 4)
The pour itself runs a few hours. Finish is your call: broom for grip, a light exposed aggregate for texture, or saw-cut joints for a cleaner line. Most Garland homeowners go broom, honestly, because it holds up to clay movement and hides minor surface wear. You should be around for the finish decision before we start.
Stage 5: Cure and inspection (day 4 – 7)
Concrete keeps gaining strength for weeks. We keep it wet-cured, keep vehicles off for at least 7 days, and pull any required Garland permits and inspections as part of the job. If the driveway is part of a full Driveway & Pavers in Garland project, the sequencing gets planned around the other trades so the new slab isn’t the last thing to get driven over.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before We Pour
You’re picking a slab, not just a color. These are the decisions that actually matter and what each one costs you in real terms:
- Standard 4-inch slab vs. thickened edge: A 4-inch slab handles normal passenger vehicles. If you park a heavy truck or RV, or the drive crosses a utility trench, a 5 – 6-inch slab with thicker edges is worth the extra few hundred dollars. Cheaper now than replacing it in six years.
- Base material: A compacted gravel base adds cost up front but is the single biggest defense against Garland’s clay movement. Pouring straight over clay is the shortcut that shows up as cracking and settling.
- Finish: Broom, exposed aggregate, or a saw-cut pattern. Broom is the grippiest and the most forgiving on the surface; exposed aggregate gives texture but holds dirt; saw-cut joints are purely cosmetic and add a modest line item.
- Reinforcement: Rebar or wire mesh in the slab. On a slab on expansive clay we recommend it, and it’s a small percentage of the total.
- Drainage: A channel drain or a graded swale away from the garage door matters more than most people expect. Water pooling at the door finds the weakest point in your framing.
If you’re also planning a new garage door or a wider opening, homeowners often pair this with Door Installation in Garland so the slab and the door are measured to the same plan.
What Concrete Driveways & Concrete Work Costs in Garland, TX

Plan on $4,500 – $12,000 for a new concrete driveway in Garland, or $5,000 – $14,000 if you’re replacing an existing slab outright. A small walkway or a garage approach poured alongside the drive is usually far less than a standalone job because the crew and equipment are already on site.
Five things push that number around:
- Size: A single-car drive sits near the low end; a double drive or one with a turnaround pushes the total up fast.
- Existing condition: A rotting slab that has to be broken out and hauled off is a real line item. So is a base that has to be rebuilt.
- Access: On the narrow lots common in 75040 and 75041, a truck that can’t reach the pour site means more short hauling and longer labor. That’s an honest local cost.
- Material grade and finish: Thicker slabs, reinforcement, and a decorative finish each add to the number.
- Permit scope: A driveway that triggers a right-of-way or widening review adds permit and inspection cost. Structural changes add more.
A written estimate from us is line-item and up front: what’s being removed, what’s being poured, the thickness, and the finish. What it typically doesn’t include is landscaping repair after the yard gets torn up, or a change to drainage that turns into its own project. We’ll flag both before we start. Our 730-Day Done Right Promise covers the workmanship – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland is a first-ring postwar manufacturing suburb built largely for the workers of the old Kleenex/Lakeside and Raytheon/Defense plants, and the concrete here shows it. Much of the work is on 1950s – 1970s single-story brick veneer ranches, often on pier-and-beam or early slab foundations. On the older slabs, we routinely find the original drive poured tight to the garage slab with no expansion joint, and that’s where the garage door stops closing true. North Texas blackland clay expands and contracts with the wet-spring/dry-summer swing, and Garland’s clay moves enough to crack a boxed-in slab within a few seasons. The other local reality: lots across the older grid are narrow and often near impervious-cover limits, so a widened drive or a new slab tied to a detached garage can hit setback and impervious-surface rules that a contractor used to newer suburbs won’t anticipate. You’ll see this all over the blocks near downtown Garland and out along the I-635 edge. We cover the full Garland area, including 75040, 75041, 75042, and 75049, and we pull the permits and inspections that apply.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Garland

Most residential jobs run 3 – 7 days from demo to finish, plus 7 days of staying off the slab. Weather and the age of the base are the two things that can stretch it. Call (888) 343-9048 for a timeline on your specific drive.
Not always – a straight replacement within the existing footprint usually doesn’t, but a widening, a new approach, or anything touching the right-of-way often does. We check the requirement for your address and pull what’s needed as part of the estimate.
Yes, in most cases – the slab is poured to the existing door and framing. If the door is already out of square from foundation movement, that’s the conversation to have before we pour, because we won’t pour to a bad line.
Driveway replacement runs $5,000 – $14,000, and with us the number you see is the number you pay. Changes only come up when you approve them in writing. Call (888) 343-9048 for an exact quote – estimates are free.
Every job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees we know of in residential construction. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform.
Get a Free On-Site Estimate for Concrete Driveways & Concrete Work in Garland
Call (888) 343-9048 for a free estimate. A live person answers, 24/7, and we’ll set a time to walk your drive, check the base, and hand you written line-item pricing before any work is agreed to. If you’re weighing a new slab against pavers, we’ll show you both honestly – and if your project also involves a detached garage or an outbuilding, homeowners often pair this with ADU Site Prep & Utilities in Garland. From foundation to finish line, the estimate is where we start.
Written by the team at Groundwork Construction Co.












