







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Garland, TX: What It Takes and What It Costs
Door installation in Garland, TX typically runs $650 – $2,400 per door installed, with most interior door swaps landing at the low end and exterior entry systems at the high end. A standard single-door replacement is a one-day job; a whole-house interior rehang or an entry system with sidelights runs two to three days. Call (888) 343-9048 and we’ll set a free on-site estimate so you get a real number for your house, not a phone guess.
How Door Installation Actually Runs, Stage by Stage

Most contractors describe door work as “measure, install, done,” which tells you nothing about what your week looks like. Here’s the honest sequence we follow on a Garland door installation, with the time each stage takes and what you have to decide along the way.
Stage 1: Measure and framing inspection (day 1, 1 – 2 hours)
We pull the trim and check the rough opening, the header, and how plumb and square the existing frame sits. On a 1950s – 1970s Garland ranch, jambs are rarely square anymore, so this is where we learn whether the opening needs shimming, a new king stud, or reframing. You decide nothing at this stage; you get a written report on what the opening will need.
Stage 2: Demo and prep (day 1, 2 – 4 hours)
Old door, casing, and any rotted sill or subfloor come out. We inspect the threshold and framing for water damage and termite activity, since older exterior openings in Garland homes often hide soft wood behind the trim. If we find rot, we price the repair before touching it, not after.
Stage 3: Frame and opening work (day 1 – 2)
New rough framing, sill pan flashing, and a level, square opening go in. This is the stage that separates a door that swings true for 20 years from one that sticks by the second summer. On pier-and-beam homes, if the floor is already out of level, we account for it here or recommend foundation shimming first.
Stage 4: Hang and seal (day 2)
The door goes in, hinges set, latches aligned, weatherstripping and threshold seated. Exterior doors get sealed and flashed at the edges, which matters in Garland’s hail-and-wind corridor. You decide the hardware finish and whether you want a deadbolt keyed to match your other exterior doors before this stage.
Stage 5: Trim, paint touch-up, and final walk (day 2 – 3)
Casing goes back on, caulk lines get finished, and we walk the job with you: swing test on every door, latch test, seal check, and a look at the trim gaps. This is where you sign off, and where our 730-Day Done Right Promise is documented in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Actually Choose Between
Door installation is a spec job, not a commodity job. The material and system you pick drives both the price and how long the door survives a North Texas summer.
- Hollow-core interior doors: The budget standard, $80 – $200 per door uninstalled. Light, fine for closets and rentals, but they dent and don’t mute sound well. Suits a quick refresh in a 75041 rental or a flip.
- Solid-core interior doors: $200 – $450 per door. Heavier, quieter, and they hold up to kids and pets. Worth the upgrade in bedrooms and bathrooms where you want privacy.
- Steel entry doors: $400 – $1,200 installed, the most common exterior choice in Garland. Good security and low maintenance, but they can dent and will show hail dings on the face after a bad storm.
- Fiberglass entry doors: $700 – $2,200 installed. Warp-resistant, paintable, and they hold a stain finish better than wood in our climate. The right pick when you want the look of wood without the maintenance.
- Wood entry doors: $1,200 – $3,000+ installed. Beautiful, but they need re-sealing every couple of years in our sun and humidity swing. Suits homeowners who will keep up with them.
- Impact-rated and storm-rated doors: at the top of the range. Relevant if you’re upgrading the whole envelope, and worth pairing with impact glazing.
Hardware matters as much as the slab. A builder-grade knob and a mid-grade lever handle wear very differently, and a good deadbolt is a security decision, not a style one. If your door installation is part of a full Windows & Doors in Garland project, we spec the hardware across the house together so the finishes and keying match.
What Door Installation Costs in Garland, TX

Residential door installation in Garland runs $650 – $2,400 per door for a typical residential job, and $3,000 – $8,500 for a whole-house interior rehang with new casing and paint. That’s the working range; here’s what pushes a job from one end to the other.
- Size and type: an interior slab swap is the cheapest job on the list; a double entry with sidelights is the most expensive.
- Existing condition: a plumb, square opening means a quick hang. Rotted framing, water-damaged sill, or a floor out of level from foundation movement adds framing and finish work.
- Relocating the opening: moving a door to a new wall means framing, drywall, and possibly rerouting wiring or a header, which adds hours and real cost.
- Material grade: hollow-core to solid-core, steel to fiberglass, all move the number.
- Permit scope: a like-for-like swap usually doesn’t trigger a permit; a new opening or a structural change does, and that adds inspection time to the schedule.
A written estimate from us itemizes the door, hardware, framing repair, finish work, and disposal separately, with no change orders unless you approve them. What it typically doesn’t include: paint beyond touch-up, drywall repair outside the door opening, or foundation shimming if the floor needs it first.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland is a first-ring postwar manufacturing suburb, built largely for the workers of the Kleenex/Lakeside and Raytheon/Defense plants, so most door work here is renovation on 1950s – 1970s single-story brick ranches and minimal-tradition tract homes, not new construction. That shows up in the openings. Original jambs are often out of square, and on the older grid around 75040 and 75042 the trim and sill are where we find the water damage. On narrow lots where the house is already close to the impervious-cover limit, we also work under setback reality, which is why a new opening or a room addition inside those ZIP codes needs a careful look before anyone cuts. Blackland clay soil moves these pier-and-beam and early slab foundations, and a door that latches cleanly in March can bind by August if the frame was set to a moving floor. Where a door fails because the entry leaked or the siding aged out, homeowners often pair this with Windows & Doors work to fix the envelope in one pass. We cover the whole city, from the older grid to the 1970s – 80s subdivisions out toward 75043, and you can see our full Garland service area.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Door Installation in Garland

A single-door installation is typically one day, and a whole-house interior rehang is two to three days. Exterior entry systems with sidelights often run two days because of framing and sealing work. Call (888) 343-9048 for an exact schedule after we see the openings.
A like-for-like replacement usually doesn’t require a permit, but a new opening or any structural change to the wall does. We identify the permit scope in the written estimate so there are no surprises. Call (888) 343-9048 to talk through your specific door.
Yes, in most cases. Swapping a door into an existing opening leaves the plumbing and electrical alone, and only a relocated or widened opening touches framing. The estimate tells you which category your job falls into. Call (888) 343-9048 to schedule a free on-site look.
Most jobs run $650 – $2,400 per door, with whole-house rehangs at $3,000 – $8,500. The price depends on door type, existing condition, and whether the opening needs framing work. Call (888) 343-9048 for an exact quote; estimates are free.
Workmanship is covered by our 730-Day Done Right Promise, one of the longer guarantees in residential construction. If a door settles, sticks, or a seal fails in that window, we make it right. Call (888) 343-9048 and we’ll walk through the warranty in writing.
Get a Free Door Installation Estimate in Garland
Door installation is a one-day to three-day job, priced in writing, with the framing, hardware, and finish itemized before we start. Call (888) 343-9048 for a free on-site estimate in Garland. A live person answers, day or night, and we’ll book a time that works for you. If you’re already planning a bigger remodel, homeowners often pair this with Cabinets & Countertops in Garland or a Garage Conversion ADU in Garland, and we can scope both together. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co.












