A Groundwork company - serving Allen, TX
A living room with a wall of new windows and a sliding glass door
Door Installation · Garland, TX

Door Installation in Garland - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Allen
A new casement window over a kitchen sink
A new multi-panel patio door opening a kitchen to the patio
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Door Installation in Garland, TX: What It Takes and What It Costs

Door installation in Garland, TX typically runs $650 – $2,400 per door installed, with most interior door swaps landing at the low end and exterior entry systems at the high end. A standard single-door replacement is a one-day job; a whole-house interior rehang or an entry system with sidelights runs two to three days. Call (888) 343-9048 and we’ll set a free on-site estimate so you get a real number for your house, not a phone guess.

Call (888) 343-9048

How Door Installation Actually Runs, Stage by Stage

A new front entry door with glass sidelights

Most contractors describe door work as “measure, install, done,” which tells you nothing about what your week looks like. Here’s the honest sequence we follow on a Garland door installation, with the time each stage takes and what you have to decide along the way.

Stage 1: Measure and framing inspection (day 1, 1 – 2 hours)

We pull the trim and check the rough opening, the header, and how plumb and square the existing frame sits. On a 1950s – 1970s Garland ranch, jambs are rarely square anymore, so this is where we learn whether the opening needs shimming, a new king stud, or reframing. You decide nothing at this stage; you get a written report on what the opening will need.

Stage 2: Demo and prep (day 1, 2 – 4 hours)

Old door, casing, and any rotted sill or subfloor come out. We inspect the threshold and framing for water damage and termite activity, since older exterior openings in Garland homes often hide soft wood behind the trim. If we find rot, we price the repair before touching it, not after.

Stage 3: Frame and opening work (day 1 – 2)

New rough framing, sill pan flashing, and a level, square opening go in. This is the stage that separates a door that swings true for 20 years from one that sticks by the second summer. On pier-and-beam homes, if the floor is already out of level, we account for it here or recommend foundation shimming first.

Stage 4: Hang and seal (day 2)

The door goes in, hinges set, latches aligned, weatherstripping and threshold seated. Exterior doors get sealed and flashed at the edges, which matters in Garland’s hail-and-wind corridor. You decide the hardware finish and whether you want a deadbolt keyed to match your other exterior doors before this stage.

Stage 5: Trim, paint touch-up, and final walk (day 2 – 3)

Casing goes back on, caulk lines get finished, and we walk the job with you: swing test on every door, latch test, seal check, and a look at the trim gaps. This is where you sign off, and where our 730-Day Done Right Promise is documented in writing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Door Options You’ll Actually Choose Between

Door installation is a spec job, not a commodity job. The material and system you pick drives both the price and how long the door survives a North Texas summer.

  • Hollow-core interior doors: The budget standard, $80 – $200 per door uninstalled. Light, fine for closets and rentals, but they dent and don’t mute sound well. Suits a quick refresh in a 75041 rental or a flip.
  • Solid-core interior doors: $200 – $450 per door. Heavier, quieter, and they hold up to kids and pets. Worth the upgrade in bedrooms and bathrooms where you want privacy.
  • Steel entry doors: $400 – $1,200 installed, the most common exterior choice in Garland. Good security and low maintenance, but they can dent and will show hail dings on the face after a bad storm.
  • Fiberglass entry doors: $700 – $2,200 installed. Warp-resistant, paintable, and they hold a stain finish better than wood in our climate. The right pick when you want the look of wood without the maintenance.
  • Wood entry doors: $1,200 – $3,000+ installed. Beautiful, but they need re-sealing every couple of years in our sun and humidity swing. Suits homeowners who will keep up with them.
  • Impact-rated and storm-rated doors: at the top of the range. Relevant if you’re upgrading the whole envelope, and worth pairing with impact glazing.

Hardware matters as much as the slab. A builder-grade knob and a mid-grade lever handle wear very differently, and a good deadbolt is a security decision, not a style one. If your door installation is part of a full Windows & Doors in Garland project, we spec the hardware across the house together so the finishes and keying match.

What Door Installation Costs in Garland, TX

Installers setting a new window and checking it for level

Residential door installation in Garland runs $650 – $2,400 per door for a typical residential job, and $3,000 – $8,500 for a whole-house interior rehang with new casing and paint. That’s the working range; here’s what pushes a job from one end to the other.

  • Size and type: an interior slab swap is the cheapest job on the list; a double entry with sidelights is the most expensive.
  • Existing condition: a plumb, square opening means a quick hang. Rotted framing, water-damaged sill, or a floor out of level from foundation movement adds framing and finish work.
  • Relocating the opening: moving a door to a new wall means framing, drywall, and possibly rerouting wiring or a header, which adds hours and real cost.
  • Material grade: hollow-core to solid-core, steel to fiberglass, all move the number.
  • Permit scope: a like-for-like swap usually doesn’t trigger a permit; a new opening or a structural change does, and that adds inspection time to the schedule.

A written estimate from us itemizes the door, hardware, framing repair, finish work, and disposal separately, with no change orders unless you approve them. What it typically doesn’t include: paint beyond touch-up, drywall repair outside the door opening, or foundation shimming if the floor needs it first.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Garland Homes Specifically Do to This Job

Garland is a first-ring postwar manufacturing suburb, built largely for the workers of the Kleenex/Lakeside and Raytheon/Defense plants, so most door work here is renovation on 1950s – 1970s single-story brick ranches and minimal-tradition tract homes, not new construction. That shows up in the openings. Original jambs are often out of square, and on the older grid around 75040 and 75042 the trim and sill are where we find the water damage. On narrow lots where the house is already close to the impervious-cover limit, we also work under setback reality, which is why a new opening or a room addition inside those ZIP codes needs a careful look before anyone cuts. Blackland clay soil moves these pier-and-beam and early slab foundations, and a door that latches cleanly in March can bind by August if the frame was set to a moving floor. Where a door fails because the entry leaked or the siding aged out, homeowners often pair this with Windows & Doors work to fix the envelope in one pass. We cover the whole city, from the older grid to the 1970s – 80s subdivisions out toward 75043, and you can see our full Garland service area.

Serving Garland, TX – Our Local Coverage Area

We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked About Door Installation in Garland

A new stained cedar privacy fence

Get a Free Door Installation Estimate in Garland

Door installation is a one-day to three-day job, priced in writing, with the framing, hardware, and finish itemized before we start. Call (888) 343-9048 for a free on-site estimate in Garland. A live person answers, day or night, and we’ll book a time that works for you. If you’re already planning a bigger remodel, homeowners often pair this with Cabinets & Countertops in Garland or a Garage Conversion ADU in Garland, and we can scope both together. From foundation to finish line, built to last and backed in writing.

Written by the team at Groundwork Construction Co.

Why Garland Chooses Groundwork Construction Co. of Allen

We set the standard for door installation in Garland.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Garland

Getting your door installation project started is simple.

1

Call or Request a Free Estimate

Tell us about your door installation project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local door installation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Garland Customers Say

Trusted by homeowners across Garland and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new wood side gate with black hardwareA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodel

More services in Garland

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Allen

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Allen team

A local vetted partner works across Allen and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Door Installation in Garland?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Garland.

(888) 343-9048

Request a Free Estimate in Garland

Tell us about your door installation needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch