







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Garland, TX: What the Job Actually Involves
Cabinets & countertops in Garland, TX typically run $14,000 – $45,000, and a full tear-out and replacement takes about two to four weeks from demo to final caulk. Most of that is waiting: cabinets are built to order and stone gets templated after the boxes are set. You’re pricing new cabinet boxes and doors, a countertop surface, and the carpentry that ties them together. Call (888) 343-9048 to schedule a free on-site estimate.
How We Sequence Cabinet and Countertop Work

These are the five stages we run on every Garland cabinet and countertop job. Each one has a decision attached to it, and the decisions are what keep the schedule honest.
1. Measure and field-check (day 1, about 2 hours)
We measure the room, check wall plumb and floor level, and photograph the plumbing and electrical rough-in behind the existing cabinets. On Garland’s older ranches this is where we find out whether the wall behind the cabinets is flat enough to hang boxes without shimming. You decide the cabinet layout and door style at this stage, because lead times start the moment the order goes in.
2. Cabinet order and lead time (3 to 8 weeks)
Stock cabinets arrive in roughly a week. Semi-custom, which is what most Garland homeowners choose, runs four to six weeks. Fully custom stretches past eight. You’ll pick door profile, finish, and drawer hardware here. KraftMaid is our go-to for semi-custom because the finish options hold up to a busy kitchen and the lead time is predictable.
3. Demo and prep (days 1 and 2 of install)
Old cabinets and countertops come out, and we cap the water lines and make the electrical safe. Flooring gets protected. If the plan calls for moving a sink or range, the plumber and electrician rough in on these days. Most Garland jobs don’t move plumbing, which is a large part of why they stay on budget.
4. Cabinet set and countertop template (days 3 to 5)
Base and wall cabinets go in level and shimmed, then the countertop fabricator templates the exact shape. Stone slabs get cut from that template, which takes another five to ten business days. You confirm the sink and faucet during this window so the fabricator can cut the opening correctly.
5. Countertop install and finish (final 2 to 3 days)
The countertop lands, the sink and faucet get set, and we reinstall doors, drawer fronts, and trim. Final walkthrough covers alignment, caulk lines, and the operation of every drawer. Any issue found here is covered under our 730-Day Done Right Promise, which is one of the longest workmanship guarantees in the residential construction space.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter
Most of the value in this job comes from three decisions. Get them right and the rest follows.
- Cabinet construction: Plywood boxes hold screws and resist moisture far better than particleboard. For a Garland kitchen that sees real cooking and North Texas humidity swings, plywood is worth the 10 – 15% premium.
- Door style and finish: Painted MDF doors take a clean look but chip at the edges under heavy use. Thermofoil resists moisture but can peel at the corners over time. Solid wood and wood-veneer doors cost more and hold up best.
- Countertop material: Quartz and granite are the durable standard and run $50 – $100 per square foot installed. Laminate costs far less and looks fine, but it scorches and can’t be repaired invisibly. Butcher block suits baking-heavy kitchens and needs annual oiling.
- Drawer and door hardware: Soft-close undermount slides are worth insisting on. Cheaper side-mount slides wear out in three or four years of daily use.
- Sink and faucet: An undermount sink requires the countertop fabricator to cut and polish, so choose it before templating. Kohler is a reliable name here for a faucet that lasts.
What Cabinets & Countertops Costs in Garland, TX

Plan on $14,000 – $45,000 for a full cabinet and countertop replacement in Garland, TX. A tight galley with stock cabinets and laminate sits near the low end. A large kitchen with semi-custom plywood boxes, quartz counters, and a relocated sink sits near the high end. Five things push the number:
- Linear feet of cabinetry: the single biggest driver. Every additional run of base and wall cabinets adds cost.
- Condition of what’s behind the old cabinets: water damage, out-of-square walls, or a floor that needs leveling add labor.
- Moving plumbing or electrical: relocating a sink or range means permits, a plumber, and an electrician.
- Material grade: stock vs. semi-custom vs. custom boxes, and laminate vs. quartz vs. natural stone.
- Permit scope: a straight swap is often permit-exempt; moving plumbing or gas is not.
Your written estimate itemizes cabinets, countertop, labor, removal, and any permit fees. It doesn’t cover appliances you supply, wall repair beyond patching, or a flooring replacement, which we quote separately if you want it. Upfront pricing means the number you see is the number you pay, with no change orders for scope we already measured.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Most of the kitchens we open up in Garland sit inside 1950s – 1970s single-story brick ranches, and those houses have a few predictable surprises. Wall framing in the postwar stock is often out of plumb by an inch or more over a long run, so base cabinets need shimming and a scribed filler to sit level and read straight. Blackland clay under the slabs moves with our wet springs and dry summers, and a slab that has shifted will throw a kitchen floor out of level, which shows up in your cabinet and drawer alignment. We check floor flatness before the order goes in for exactly that reason. When a Garland homeowner is already pulling permits and the scope widens, it’s often part of a full Kitchen Remodeling in Garland, and some pair a cabinet and countertop refresh with a Garage Conversion ADU in Garland while the trades are already on site. We work these ZIP codes across Garland: 75040, 75041, 75042, and 75049, including jobs off the older grid near Loop 12 where narrow lots and tight access change how we stage materials. If you’re weighing a bigger build too, see our New Detached ADU in Garland work.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Garland

Two to four weeks from demo to final walkthrough is typical in Garland, and most of that is the cabinet and stone lead time. If you choose stock cabinets and a pre-fabricated countertop, the on-site work can compress into about a week. Call (888) 343-9048 for a timeline based on your room.
Usually not, as long as you’re swapping cabinets and countertops in the same place without moving plumbing, gas, or electrical. The moment a sink, range, or gas line relocates, the work needs a permit and inspection, and we pull it and see it through. Ask us to spell out the permit scope in your written estimate.
Yes, and that’s the most common approach in Garland. Keeping the sink and range where they are means no plumbing or electrical relocation, no permit, and a faster job. A same-footprint swap also keeps you under the $14,000 – $45,000 range because you’re not paying to move services.
Quartz is the safer pick for most Garland homes: it’s non-porous, resists staining, and never needs sealing. Granite is the more durable natural choice and handles heat better, but it needs periodic sealing in our humid spring weather. Both are excellent, and both run $50 – $100 per square foot installed.
Installation and workmanship on your cabinets and countertops in Garland are covered by our 730-Day Done Right Promise. If something we installed isn’t right, we come back and make it right. Cabinet and countertop manufacturers also carry their own product warranties, and we walk through both on the final walkthrough.
Get a Free Cabinet and Countertop Estimate in Garland
We’ll come out, measure the room, check the walls and floor, and hand you a written estimate that itemizes cabinets, countertop, labor, and permits. No pressure and no vague ballparks. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. Call (888) 343-9048 and a live person answers, any hour. Reach out to Kitchen Remodeling for the broader scope.
Written by the team at Groundwork Construction Co.












