







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Fairview, TX: What It Costs and How Fast It Goes Up
A chain link fence in Fairview, TX typically runs $3500 – $9000 depending on linear footage, height, gauge, and gate count, and most residential lots are finished in two to four working days once materials land. On a standard quarter-acre lot you’re usually looking at $3500 – $5500; acre-plus estate lots in the 75002 ZIP push toward the top of that range. Call (888) 343-9048 for a free on-site measure and a written, line-item number.
How the job actually runs, start to finish
Chain link isn’t complicated, but the sequence matters more than most homeowners expect. Here’s the real order of operations on a Fairview job, with what you decide and when.
- Day 1 – walk, measure, and utility locate. We measure the actual run line, note slopes, gates, and anything overhead or underground. You decide fence height (4, 5, or 6 feet), gauge, and gate placement. We call in the 811 utility locate before a shovel touches ground; on wooded lots this is where tree roots and buried irrigation lines surface.
- Day 1-2 – layout and hole digging. Corner and terminal posts go in first, spaced no more than 10 feet apart on straight runs. Post holes get dug to depth and set in concrete, which needs a cure window before tension goes on. On Fairview’s heavy clay, setting depth and drainage matter more than in sandy soil.
- Day 2-3 – posts, rails, and tension. Top rail and line posts get tied in, then the fabric is stretched and hog-ringed. Tensioning is the step that separates a fence that stays tight from one that sags within a season.
- Day 3-4 – gates and hardware. Gate frames hang, hinges and latches set, and you walk the line with us to check swing, latch, and tension. This is your sign-off moment.
- Final – cleanup and haul-off. Spoils go with us, and you get the written warranty paperwork on the 730-Day Done Right Promise. Any punch items get scheduled before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually change the fence you get
Chain link is a small set of decisions, but each one moves both price and lifespan. Here’s what you’re really picking between.
- Gauge of wire. 11.5-gauge is the standard residential call and holds up well; 9-gauge is heavier and costs more but resists dogs, balls, and leaning better. On large Fairview lots with pets or kids, the heavier gauge is usually worth it.
- Height. 4-foot reads as a boundary line, 5-foot is the common residential pick, 6-foot is the security choice. Each step up adds material and post cost.
- Coating. Galvanized is the budget-friendlier route; vinyl-coated (usually black or green) costs more but blends into tree lines and resists the sun better. On heavily wooded lots, black vinyl-coated virtually disappears into the shade.
- Post and rail. Standard round posts versus heavier schedule pipe; top rail included versus not. This is where cheap bids quietly cut corners.
- Gates. Walk gates versus drive gates, and whether you want self-closing hinges and a latch rated for kids. Gate count is often the single biggest swing in the quote.
What a Chain Link Fence costs in Fairview, TX

The lead number for this job is $3500 – $9000. Where a specific property lands depends on five things:
- Linear footage. A typical residential perimeter sits in the low end; acre-plus estate lots in Fairview push toward the high end.
- Existing fence to remove. Tear-out and haul-off of an old fence adds labor and disposal.
- Terrain and tree roots. Sloped runs, root-heavy lines, and rocky ground slow post digging and can add cost.
- Gauge and coating. Heavier wire and vinyl coating raise material cost but extend life.
- Gates. Each gate adds frame, hardware, and install time; drive gates more than walk gates.
A written estimate should spell out footage, height, gauge, coating, post spacing, gate count and type, tear-out, and cleanup. What’s often left off cheap quotes: utility locating, root and rock handling, and haul-off. Ask for those in writing so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview properties do to this specific job
Fairview’s housing stock is dominated by large, custom-built single-family homes on lots of an acre or more, many from the 1990s through the 2010s, with a steady wave of tear-down rebuilds and additions. That shapes chain link work here in ways it doesn’t in tighter subdivisions. On acre-plus lots, line runs are longer, corners are fewer, and gate placement matters more because you’re often fencing a working yard, a pool enclosure line, or a dog run rather than a postage-stamp back yard.
The bigger local factor is the trees. Fairview is one of the few Collin County towns where new custom-home construction on heavily wooded lots often triggers tree-preservation and setback variances, and builders design around mature oaks and pecans rather than clear-cutting. That same canopy sits over most fence lines. Before we dig, we route the line to spare root zones where we can, and we flag any tree that a run would damage. None of this is a routine step in neighboring Allen or McKinney subdivisions. Add North Texas blackland clay that shrinks and swells with wet-dry cycles, and post depth and concrete set become a real design decision, not a formality.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Fairview

Most residential chain link fences in Fairview are finished in two to four working days once materials are on site, with the concrete cure window included. Acre-plus lots and job sites with heavy tree-root interference can run longer. Call (888) 343-9048 and we’ll give you a realistic window after the on-site measure.
Fairview has fence-height and placement rules, and HOA covenants on large-lot estates often add their own limits. We pull the permits that apply and walk the inspections, and we’ll flag any HOA restriction that affects height or placement before the build. Call (888) 343-9048 if you’re unsure what applies to your lot.
Yes. We call in the 811 utility locate before digging, route the line to spare irrigation and root zones where we can, and flag any conflict before we set a post. On heavily treed Fairview lots this is standard practice, not an extra. Call us to walk your line before work starts.
Fairview chain link typically runs $3500 – $9000 depending on footage, height, gauge, and gate count. Call (888) 343-9048 for an exact quote on your lot; estimates are free, and the number you see is the number you pay.
Every chain link fence we install is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right. Call for a written estimate that spells out the coverage.
Get a free chain link fence estimate in Fairview
Call (888) 343-9048 to schedule a free on-site estimate. A live person answers around the clock, we measure your actual line, and you get a written line-item price covering footage, gauge, coating, gates, tear-out, and cleanup. Most fences go up in a single visit schedule, and every install is backed by the 730-Day Done Right Promise. If your project grows beyond the fence line, see our Fence Installation service or the full Fence Installation in Fairview scope, and homeowners often pair a fence with ADU Site Prep & Utilities in Fairview or Door Installation in Fairview; we cover Fairview and the surrounding Collin County area.
Written by the team at Groundwork Construction Co.












